I downloaded the firmware using sp flash tools. After the process is completed, there is no visuals or turn on the device. The main issue is, the device is not detecting the PC. Please help
@genaugmen45057 күн бұрын
I want hits like that to sound off straight out the ether every time I do something.
@srdgjkhvdfhsedfkjd-x5m11 күн бұрын
8:32 start of process, hope this helps.
@hycarl.162315 күн бұрын
where is the toshiba ic video???
@sui8116 күн бұрын
Seems like my Device (Medion Lifetab E1044) can't connect to SP Flash Tool . Do you have any recommendations?
@amirawan8719 күн бұрын
Hey, I recently bought Nakamichi NAM5260 and for some reasons it was havibg problem with the sound. Like the sound in the car speakers were in waves like high and low. I contact the guy who installes it and he told be to take the main plugb out and put it back. I did the same and now it is not turning back on. It shows Nakamichi logo screen and then screen goes off. Could you please help me out with it?
@edinfific257628 күн бұрын
Great tutorial, but what's up with the annoying "music" (if it could be called that)?
@Josueee7Ай бұрын
Help, Flash tools say: Storage type mismactch! scatter torage type is HW_STORAGE_EMMC target storage type is HW_STORAGE_NAND thank your help!
@SenseiTimMinkeАй бұрын
I have the YT9216BJ_00012_V0001 and im having issues with the mains audio going out except when i hit a big bump or hit the dash just right. all 4 door speakers will cut out simultaneously like it's going into a protected mode but my s/w output is 100% unaffected. I might have a grounding speaker wire in one of my rear doors but haven't had the tools to get the doors opened after my truck bed was broken into in my apartment-locked parking. if I can get it working I'd like to flash it with your software, if i can't I'll send it as a donation and go back to my Kenwood DDX2.
@adrianlemuelАй бұрын
Hi sir! Can you teach me how to download the software to fix the android headunit?
@danielcamposramos9943Ай бұрын
On newer units, with all conectors in the same line, the trick that worked for me was to keep it plugged, give the reboot command and "turn the car key" off. Than plug it with start enabled and "turn the car key" on.
@wiredgenius_snАй бұрын
when making ROM_USER its come S_FT_READBACK_FAIL (4009) error after 10% completed. what is it?
@isottoa702Ай бұрын
Hello. T3L 2+32 GB I increased the volume and the sound and screen were turning off and on. It was playing normally when the volume was turned down. I increased the volume and continued listening loudly, it kept turning off and on and finally it doesn't turn on at all now. panel touch lights are flashing. The startup logo comes on and suddenly closes. It doesn't open at all anymore. What can we do
@JohnLundy-cf4teАй бұрын
can tou repair my unit mode 9520a
@cos_marcАй бұрын
Hey, I have the (Bosion) B200 head unit with the AC8257 chipset and I would like to re-flash it as it's stuck on my welcome android screen. Do you have any links on how to do this? I already have an android version that would be compatible, I just don't know which bin file to select for the download agent. I already have the android scatter file. Do you know by any chance how can I put it into recovery mode? It seems that the people who know on xda forum, don't reply anymore. Any help will be appreciated.
@planteavidaАй бұрын
Hi, thanks for the great video! Do you have, by chance, the best Android version or firmware file that we can install on these devices to make them perform as well as possible? I have installed the XL6107 system version: 20211027.144419 and MCU: XL6107_V107_20210910_1C1 The problem is that the FM stations are always mixed up and also this version does not allow me to use the Waze application, which is not great at all. Thank you for your help! Best regards.
@user-yi2ij6jn5tАй бұрын
I have kroak kcs1 screen flashes white nothing works where do i get the shattered files ? Its 9212b
@jthrasher472 ай бұрын
912 volt DC power supply will work and you don't even need to spend the computer power supply.. and you don't even need that special connector.. just twist the wires together with wire nuts... I have the special adapter for a universal 12-volt plug set.. but for those that don't and don't need to spend money unnecessarily
@miguelaltamirano46122 ай бұрын
Is there a way to increase ram memory on cheap headunits?
@yannis92preloude2 ай бұрын
I Have the same unit with not booting rom stuck on updateing. I dont have any back up of the unit. or the rom , How can I recover back to factory so that it will work. YT9216-VER 0.1 Any help will be Great.
@TheMan-si4iu2 ай бұрын
Holy crap that shitty background music!
@groinache2 ай бұрын
is it possible to add ram or bigger storage ?
@Dana319652 ай бұрын
I just bought one of these radios , it worked great for a couple days but then the touch screen didn’t work. I used my five fingers to recalibrate it and still nothing. I notified the cellular and told me that he will send me another touch screen, this dude thinks I work on computers. No I want to send it back I’m frustrated $187 dollars gone.
@juniorbaptista65873 ай бұрын
Can i use this tutorial with all head unit 6288a uses a same chipset mtk 8227L?
@technicalhub99253 ай бұрын
Yt9260 ver1.2 stock rom file?
@screamer89393 ай бұрын
Hello Can you please share a dump for YT-9213AJ MCU 3.1?
@iordaniordanov29174 ай бұрын
Bord Topway TS18 upload files link please? Load android logo.
@yulioakhmad1874 ай бұрын
hello sir, i ve tried to flash your rom but there's no vendor.img
@marcolewinsky734 ай бұрын
where is the test point on the motherboard JCAC10003-0C2-V1.0 50R0-221121 0757-AA
@mirzanoshin23674 ай бұрын
I was trying to revive it. Its getting blue light when connected to power but not on usb? What should I do. Please help
@berdagang_pos4 ай бұрын
how if we dont have backup bootloader
@nathankritzan28354 ай бұрын
I have a Android DVD navigation 6.0 BT GPS Wi-Fi hands-free in I can't get it to stop optimizing apps can you please help me with this matter thanks
@fredhanna45734 ай бұрын
Do you have a video for the test point recovery of a 5760 board?
@wazzadale10155 ай бұрын
My android radio is locked how can I get it open have tried various codes
@frogger22225 ай бұрын
hi i have this same motherboard, the blue light turns on however it flickers and flashes brightly for a second. the issue with the car stereo was it would show the android logo for a fraction of a second and then reboot and do the same over and over. is the board fried ?
@wojtekkowal26525 ай бұрын
Where is the moment you explain how to connect to usb ?
@Csabys5 ай бұрын
Hi my head unit stuck on car logo what can i do?
@inglpz5 ай бұрын
Good afternoon, I have a kunfine android 10 screen for a peugeot 206 car, but when starting up the logo appears fine, after that stripes appear in the middle of the screen and the message fastboot mode and it no longer starts, how can I access the recovery mode to reinstall the software? I can't access recovery mode since I don't have physical buttons.
@The28vicky5 ай бұрын
Sir can I fix cmos 3v battery to fix date and time. Pls guide
@mickeyvanaudenhaege36925 ай бұрын
Will doing this fix my problem that I can't see thumb drive? After hard reset, as android boots up, a message appears saying that the FAT 32 storage failed. Unable to play music on either USB port.
@willgorut875 ай бұрын
My headunit is already bricked and I could not make any backup. I will need to test point the unit, however I don't have the scatter file. How can I create the scatter file from the firmware files?
@dharmeshmerai96725 ай бұрын
Hi , I have Grundig GX2800 head units. After update it stuck at restart screen and continues restart. Even after power off I is running
@Blaszow5 ай бұрын
Wait, where do I get a backup from?
@elih44906 ай бұрын
Where can I find installation files for my system if it dies?
@BaiQuimFlash6 ай бұрын
It’s possible to correct colors distortion on the unit screens??
@Ranma_Saotome6 ай бұрын
What does this actually do???
@kal189906 ай бұрын
How to fix usb not identify pen drive for that screen
@SultanofSerendipity6 ай бұрын
the light on the board is not as bright as yours and it is kind of flickering a little what does it mean?
@ErnestRDelaCruzJr-rp2sc6 ай бұрын
What going todo if the board is fine but cant detect in laptop? Same your model sir
@holydevil.39556 ай бұрын
My light is not switching on when connecting usb point. But it turns on when supply 12v