Dude, give them an architectural stipendium 😂

i miss this class & project so bad 🥲

Same issue. Just bought the D3 series 420 and the x-axis is stuck, only moving if I force it with the hand, but after some up and down, again same problem

Hey. even though this video is 3 years old, this helped me TONS. Thank You.

Yo you’re doing a good job, Thx Ryan

Best bridge

Nice bridge dude. From minnesota

Nice😎

Not sure why this hit my suggestions but im here for it. Good stuff makes me miss my shop classes and reminds me why i make shit for a living

Thanks so much you really helped me

really appreciate this vid, good instruction and a little comedy. Helped alot

aaaaaah

The shot shack shall live on

your either shorting the board with the case screw or something that is touch the case from the board. The ground won't help at all if something exposed is touching the case.

Are you sure you arent having shorts under the board, also check for lose wires

funny that this popped up in my feed. Keep having fun creating, you three!

Wow that is cool man they will be great engineers

I had to build the bridge with toothpicks in 7th or 8th grade. That sucks…. Anyways… Good job boys.

I remember doing that in my CAD class but we had to do it out of balsa wood

Motor issue

with this kind of load distribution there is almost no bending to the structure as a whole. Shear forces exclusively. Signifcent bending occurs only locally in the deck

Is your lead screw centered in the middle? looks like your lead screw is under tension. Or, you have a lot of backlash on the lead screw nut. They are always have issues because the have only a couple of turns thread inside and wear out easily,

Did you ever figure out what was wrong? I am having the same issue.

Hi, Do you think you could make a video of an F1 car using a minimum of 8 pieces made with seperate part sketches . Showing us an assembly?

Thanks, This really helped me out. I have to do this for an assessment with a minimum of eight parts. Do you think you can make a video on that for me?

Impressive!

thank you

Golden Melon Here

Is it a limit switch issue?

good

You're amazing

Thx u so much

p̶r̶o̶m̶o̶s̶m̶ 🌷

I remember taking the entire CNC machine apart and putting it back to together.

check if the wires are properly seated in the connectors or if the insulation is intact

yo

Great video

Nice new bucket

If u don't mind u can add more distance between those 2 servo and then place the servo in opposite direction or u can use single but better servo or use another microcontroller to invert the second servo signal

Write better code xD

thank you

Gavin should know

You really had me with the sink and the bay window for a minute

Thank you woith!

Violence is always the answer

This is like 100% verified epic moment 10/10

sorry vogt

Great Man Video Good call me

My husband uses these plans from Woodglut and is very happy with them. However. I love yours!

5:21 was that a jojo reference?