How’d you go about finding a front end that will work ?
@DS-ss7vlКүн бұрын
Not loud at all.
@Yo-mamashouseКүн бұрын
What brand exhaust is that and where can i find it?
@gunsngunplaКүн бұрын
It's the Gallop Flying Comet. I'm actually in the process of putting a quieter exhaust on the bike for OHM regulations so I'm open to selling this exhaust at a discount.
@Wrapuupallday3 күн бұрын
just Damn WOW
@zedbear14 күн бұрын
Nice off road bike! I had a chopped '75 sportster early '80s, it worked well off road. 6" over Frank's forks, hog wheel laced to a sportster hub but not the flat tread tire. I used a radius rear tire. S&S side draft carb.
@gunsngunpla4 күн бұрын
@@zedbear1 would love to see photos!
@brandonmacon33175 күн бұрын
I love it! 😍 Is that Gallop Exhaust?
@stuartbrown19616 күн бұрын
I love my Gallop exhaust pipe!!
@gunsngunpla5 күн бұрын
@@stuartbrown1961 It sounds great but is unfortunately too loud to pass Wisconsin OHM regulations which limits what off road events I can take it to.
@brandonmacon33174 күн бұрын
@@gunsngunpla yep. America. Land of the Fee 🎉
@loseyourlife40427 күн бұрын
Cool
@greatpar7 күн бұрын
Amazing. What gloves are you wearing. Cheers 🇦🇺
@gunsngunpla7 күн бұрын
@@greatpar Mechanix heat resistant gloves. Bike currently doesn't have a handlebar start button so I need to reach between the high pipes to press the solenoid, which is risky biscuits when the engine's been running.
@willc57477 күн бұрын
That's cool😅
@vtking3108 күн бұрын
OMG 😮
@RayfordRaySiegel8 күн бұрын
I wish I had that, when I was a teenager, living out in the country. I had a dirt bike that ran for a while. I wish I could have one, like that, and live out in the country.
@robertlipsey605610 күн бұрын
That was a farce!
@zacnicolai812510 күн бұрын
You ain't riding it like a dirt bike. Nice build, i had a 72 ironhead made into a mx bike. It, too, was also registered for the road.
@gunsngunpla10 күн бұрын
@@zacnicolai8125 the bike's clutch needs to be tweaked. Engagement is right at the handlebar and the bike was a bit stall happy when I took it in some single track, and that's with the clutch pulled.
@darknitethunder7 күн бұрын
@@gunsngunpla Best way to get it done right is to buy a manual for that Model and Years H- D Sportster. I have a 1989 Sporty and Manual, every thing is in Top working order. CV Carburetor work best for Stock to Mild Performance H-D EVOLUTION Sportster.
@prezzzrock11 күн бұрын
Bad Ass!!!
@seanmakesthings11 күн бұрын
Daaaamn that thing is sooo sick! the external tensioner situation is super cool, I love how you used (what looks like) a primary chain tensioner on top of the swingarm. Very creative and versatile!
@bodeine45412 күн бұрын
I've dreamed about a Harley-Davidson engine in a dirt bike frame for many years and it looks killer but probably cumbersome to ride not to mention probably pretty top heavy for a dirt bike but still, the cool factor is off the rails. I'd like to have one despite all of that.
@gunsngunpla12 күн бұрын
There are some ergonomic quirks that'll need to be addressed if I were to take this into more serious off road situations. Wisconsin OHM (Off Highway Motorcycle) regulations has a 96Db sound limit when the bike is revved. This Dirtster idles in the 90s and hits 114Db when revved because of the short stubby open pipe. Going to slap a SuperTrapp on there to mute it, then do some clutch and brake work.
@bodeine45412 күн бұрын
@@gunsngunpla Sounds like a plan. I'm curious to see how it progresses. 👍
@Rscatatebarilete12 күн бұрын
Una joyita 👏👏👏👏
@Fayaz_Sadiq13 күн бұрын
Why does it feel like I'm looking at Google Maps Street view 😭
@gunsngunpla13 күн бұрын
I wish Street View would zoom in on every bike, haha.
@Fayaz_Sadiq13 күн бұрын
@@gunsngunpla bro I was so confused, I thought it was an actual screenshot of street view but then you started moving lmao
@gunsngunpla13 күн бұрын
@@Fayaz_Sadiq Next time I'll add a glamour shot for the title card/thumbnail to spare you the confusion ;)
@Fayaz_Sadiq13 күн бұрын
@@gunsngunpla nah it wasn't because of the thumbnail, I think it was just the angle or something 😂 Very nice bike tho!
@derekdiggler918513 күн бұрын
That thing is sweet! 👍🏻
@CasperChicago3 ай бұрын
You are truly an artist! The music is played by you and the gun design is yours,...Bro,...BRO truly artistic. I got my PX4 Storm Compact Cerekoted in gold after I sawy your video. BEAUTIFUL PRESENTATION 👍🏾
@JK-yu7hj4 ай бұрын
And that’s how fast it happens… glad there were no serious consequences, Keep on riding!
@randyreviewsit7 ай бұрын
Really nice setup
@nawazboss50799 ай бұрын
Helo bro.. I really like it Beretta PX4 storm 9mm pistol. I want to buy it for shooting range and recoiless. Can you send me broo ? I will pay you first. Thank you ❤
@gunsngunpla9 ай бұрын
Build your own. I love mine too much. Will never sell it.
@nawazboss50799 ай бұрын
@@gunsngunpla where to buy it online? How I find them ?
@gunsngunpla9 ай бұрын
@@nawazboss5079 What country do you live in? I can only speak as someone living in the United States
@nawazboss50799 ай бұрын
@@gunsngunpla I'm from Pakistan. Bro please help me. I really like it. 🌹❤️🌹
@gunsngunpla9 ай бұрын
@@nawazboss5079 I'm not familiar with Pakistani gun laws. Afraid I can't help you there.
@SirAwesome5auce10 ай бұрын
Love the build want to do this but sniper gray slide and NP3 internals hammer and barrel instead of TiN
@gunsngunpla10 ай бұрын
Sounds like you're on track to filling out a custom work order form for LTT haha. I'm probably going to build out a PX4 compact myself with the LTT works.
@SirAwesome5auce10 ай бұрын
@@gunsngunpla that’s exactly what I’m going to do but I want to install everything myself I’m tinkerer and I do 90% of all my own gunsmithing only thing I’ll need from them is to crown the barrel and do the optics cut
@SirAwesome5auce10 ай бұрын
@@gunsngunpla do you know of any good flush metal +0 baseplates to replace the polymer ones they’re extremely chintzy feeling
@gunsngunpla10 ай бұрын
@@SirAwesome5auce Beretta's webstore sells really nice and relatively low profile +2 metal baseplates with Beretta logos for the 17 rounders. I have several of those and they work great.
@jaecalderon26011 ай бұрын
I don’t know why y’all think it’s an ugly gun… I feel like 1 person said it and everyone just doesn’t want to be the one that’s says it’s actually a good lookin gun..
@gunsngunpla11 ай бұрын
Lol, this comments section is a certified PX4 fanclub. We all know it's a beautiful gun.
@michaelkerr968211 ай бұрын
How did you do the medallion on the grip. .
@gunsngunpla11 ай бұрын
Acrylic paints from Tamiya and Amazon with a small brush and toothpicks 1. Base layer of gold onto the whole thing, then use the flat of an exacto knife to scrape away the paint on the raised edges to reveal the black circle rim and emblem. 2. Tiny brush or toothpick to brush on an underlayer of mirror chrome on the emblem. This 3. A coat of red on the chrome after it dries. The reason for the chrome is that the red paint is so thin that the black base of the gun can makes the final color darker.
@michaelkerr968211 ай бұрын
@@gunsngunpla you should do a video on that. Did you practice on anything 1st?
@gunsngunpla11 ай бұрын
@@michaelkerr9682 Just prior experience painting Gundam model kits.
@bombomos Жыл бұрын
That is so beautiful
@ezekielwilliams7499 Жыл бұрын
Beautiful!!
@o-g-ob4399 Жыл бұрын
Talk about hot!
@ico8272 Жыл бұрын
How much does this cost?
@gunsngunpla Жыл бұрын
This is what it cost me in parts and services on top of the base gun in 2019 when I did it. Prices have probably gone up: You can check with Middlebranch Machine for Titanium Nitride coating costs, but here's what it cost me back then: Gloss Gold for the barrel ($80) Matte Gold for decocker (2 parts), slide release and extractor ($15X4) Matte Black for slide ($80) Total: $220 Additional parts from Beretta: PX4 Fiber Optics sights ($109) PX4 Competition Trigger Group ($105) PX4 Steel Trigger ($55) PX4 Talon Grip ($20) From Langdon Tactical: Optimized Performance Trigger Bar (dramatically reduces trigger reset) ($75) Total: $364
@PatrickMersinger Жыл бұрын
People worry too much about how a thing looks over how well built and reliable it is. The thing is nearly perfect from the factory. Are these licensed Baretta parts? Will they hold up as good as the real deal. Waste of money.
@gunsngunpla Жыл бұрын
Every part was purchased from the Beretta web store, so...
@rdsii64 Жыл бұрын
My PX4 has a chrome lined barrel. Is the TiN only on the outside of the barrel?
@gunsngunpla Жыл бұрын
The Gold TiN coating is throughout the barrel. It's 100% coverage.
@rdsii64 Жыл бұрын
@@gunsngunpla Thank you
@jvaleraiii65 Жыл бұрын
Wow bravo! I would do this to mine !
@nedalhubhub1851 Жыл бұрын
In what way is Tin better than the original steel parts, It does look Prettier though.
@gunsngunpla Жыл бұрын
You're right, this is strictly an aesthetics change. The original slide coating was very shiny and would look splotchy if I got oil and carbon on it. Going with flat black/gold on the slide and gloss gold on the barrel results in a cleaner look imo.
@bikelunatic3596 Жыл бұрын
Hey, can i use this video in my new compilation? I will credit you with watermark ofc , Thx in advance
@gunsngunpla Жыл бұрын
Go for it.
@bikelunatic3596 Жыл бұрын
@@gunsngunpla thank you sir
@jonathansnyder8782 Жыл бұрын
What holster is that???
@gunsngunpla Жыл бұрын
Blackhawk Omnivore. This one works with the Surefire X300 light.
@heybear33 Жыл бұрын
Hey please could we feature this moment in our next reaction video if we credit your channel? Also if u get time it would mean so much if u could check out our channel as we are a new biker channel here on youtube! Biker Girls React xx
@gunsngunpla Жыл бұрын
Go for it.
@RoadRageUSA Жыл бұрын
Hey bro is it okay if I use this video for my new compilation?Full credited ofc! Thanks!
@gunsngunpla Жыл бұрын
Go for it.
@crazytraffic Жыл бұрын
Glad you're okay bro! May I feature this video in my new episode? Full credited of course.
@gunsngunpla Жыл бұрын
Go for it.
@2AFreeState Жыл бұрын
Goddamn. This gun. This music. I love the vibe.
@robertstotesbury8005 Жыл бұрын
TEN OR TIN parts?
@gunsngunpla Жыл бұрын
Titanium Nitride
@LifeOnMotorcycle Жыл бұрын
Hey mate, can i use this video in my new compilation? credit in the description, comment & your channel name in compilation
@gunsngunpla Жыл бұрын
Go for it.
@LifeOnMotorcycle Жыл бұрын
@@gunsngunpla thanks alot mate :) I really appreciate it!
@KaosRiders Жыл бұрын
Hey man may I include this in a compilation? It'll be credited and linked back to your channel
@gunsngunpla Жыл бұрын
Go for it.
@KaosRiders Жыл бұрын
@@gunsngunpla Thanks
@dirtbikelunatic Жыл бұрын
Hey! Good to use it in moto edit? Full credited of course
@gunsngunpla Жыл бұрын
Sure, go for it.
@dirtbikelunatic Жыл бұрын
@@gunsngunpla Thanks a lot :)
@MotoEducation Жыл бұрын
Hey man, all good to use? Full credits will be given to you, of course, thank you!
@gunsngunpla Жыл бұрын
Sure, go for it.
@MotoEducation Жыл бұрын
Hey man, I've used it, thank you so much. Feel free to check it out! BIKE CAUGHT FIRE! | BIKE, MOTORCYCLE CRASHES & CLOSE CALLS 2022 [Ep.#71]
@moto-stars Жыл бұрын
Glad you're okay bro! May I feature this video in my new episode? Full credited of course.
@gunsngunpla Жыл бұрын
Sure, why not lol.
@stitech19892 жыл бұрын
Just got this gun and now i see this!! Great work man
@juanfranciscomurillovargas15152 жыл бұрын
That’s a beauty!!
@bobbieswift28742 жыл бұрын
The action on a PX4 is slick as glass, with a very nice trigger to match. It is one fine top quality firearm that should get more recognition than it has in the past.