Paint the grill de icon it whatever you kids call it these days lol 😂😂😂😂😂😂 he’s funny
@rw70514 ай бұрын
To remove the front grill, take up the four push pins, then pull the bottom edge of grill forward. You can look down inside and see the 4 forward facing u-shaped clips. Just wiggle it forward. Then the outboard edge of headlight lifts straight up,with a tug.
@DonRicky.5 ай бұрын
still helping after 12 years, thanks.
@johnmcgowanireland6957 ай бұрын
Thank you! I got the job done based on your tutorial..
@ThatOneHoosier7 ай бұрын
This is a VERY helpful video thank you so much.
@fullfledgeentertainment76848 ай бұрын
Very helpful. Thanks
@johnymata86088 ай бұрын
Thank you for this video was extremely helpful !changed both lights in 30 min and I’m dumb lol
@Bosco-gets-it-right9 ай бұрын
You forgot to mention the last clip, right on the bottom of each housing. It must be pulled straight up or ( as I did it ) released by a longer thin flat blade screwdriver..otherwise it will fight you since you are pulling straight ahead while the clip needs to go UP...
@thomasadams38949 ай бұрын
I want to add my thank you. Very good instructions. Thank you
@kaitlincordova3879 Жыл бұрын
Thought I could get away with not removing the grill, but the assembly was being so stubborn that I finally caved and took off the grill. SO MUCH EASIER. Hopefully I remember to go ahead and do that the next time I have to change a headlight bulb. 🤦
@kevinknights9373 Жыл бұрын
I can’t thank you enough for this video. I just successfully changed the headlight bulbs on my Focus, and it went so much faster and easier seeing it done first like this.
@Lady_Tism Жыл бұрын
Wish you had shown which way to turn the bulbs out. Mine seems stuck and I'm scared imma break it 😢
@edgarandrade660 Жыл бұрын
This is great, i decided it was time to get brand new headlights and this made it. Extremely easy to install them
@codeyal-hammad3018 Жыл бұрын
Thank you
@codybarnes2863 Жыл бұрын
I got the same color car, same model, and seeing that made me know that I can trust this guy. Cheers to you for starting my mods to my car, first was blacked out headlights, next is wrapping the car!
@rorywestfall5419 Жыл бұрын
Little more succinct please.
@darrellflorez28312 жыл бұрын
THANKS, THAT WILL HELP A GREAT DEAL!!!
@liztomli2 жыл бұрын
Thank you for the video- very helpful
@62Roybe2 жыл бұрын
Please do not eat while doing voiceovers.
@hardway44752 жыл бұрын
Honestly didn’t know about the full brake, and I feel like I’m a pretty good driver. Is that only in Reach?
@jaimeestupigan70492 жыл бұрын
Best instructions ever!!!
@epicnesswithrandom38773 жыл бұрын
please help, i want to change my dome light to an led but idk what i’m doing and i don’t want to break anything.
@Shotis3 жыл бұрын
For 2012 this is a damn good video
@mangopenguin62173 жыл бұрын
just now getting into halo with the MCC and this is super helpful I had no idea abt the E-brake drifting
@alperturna43713 жыл бұрын
Thanks again:)
@williamhank45653 жыл бұрын
thank you so much spot on man
@Rimmsolin3 жыл бұрын
This is INSANE to change a lightbulb. Shame on you Ford and engineers. In and out on my Mazda 3 in 2 minutes, just pop bulb cover and twist bulb out.
@robinsanford25563 жыл бұрын
Ty Your video saved me close to 500.00 dollars
@johnf89913 жыл бұрын
You're awesome dude! Just a suggestion to quickly make your video better, add edit in a small pic of the clips under the grill, and the clip at lower right under the light fixture and the small plastic piece that juts from the center, top left bolt plastic that you have to lift up to remove the fixture. Otherwise fantastic video!
@TradingFeline3 жыл бұрын
What a classic
@Glipsnarp3 жыл бұрын
Its proper videos like this that make youtube so great.
@Barah874 жыл бұрын
Dude....your vid was the first I found searching "2008 ford focus how to replace headlight". I work for a bank and have basically no car skills however it was short and easy enough to follow I was able to do it myself. 10/10 do recommend
@robertkagarise89914 жыл бұрын
This video rocked, Wasted 15 min trying to change the headlight the manuals way. After watching this video Headlight was installed and all complete in 20 minutes. Thank You
@brucepollock9834 жыл бұрын
Wow - Video works like a champ!! Needs watching because it is not so obvious from the top down on how to get the grill out (correctly) to get to the assembly bolts!! THANKS!!
@alperturna43714 жыл бұрын
Thank you so much!
@octakhan46734 жыл бұрын
Your advice still works!
@pfsantos0074 жыл бұрын
Grille not grill. And it pops out to the FRONT. Good video overall though.
@jayh63364 жыл бұрын
easier to do it the way the dealer does it ,more likely to break the grille and what about aiming the headlights after removing them, do it for dealer way!
@ronmilligan99194 жыл бұрын
I would try and make sure the lights work,and don't forget on some bulbs don't handle bulb with bare fingers the bulb will be damaged ,because of the sweet or oil from skin ,not all the same
@ronmilligan99194 жыл бұрын
There is a special tool to remove those clips
@DancerSeattle4 жыл бұрын
This is the second or third time I've needed to use this video, so I'm leaving a couple of tips for myself and others. There is a little pin by the middle of the 3 bolts that stops the top of the grill from moving out. Get some bulb grease when you buy your replacement bulbs. My guy at O'Reilly said corrosion is the main reason our bulbs burn out early. Thank you, everyone! BTW, if this 70 yo grandmother can do this, you can too!
@brunog63754 жыл бұрын
Thanks a lot
@elnetini5 жыл бұрын
I did this today. Your video was very helpful. Thanks
@8877chico5 жыл бұрын
Thanks for tips about getting the grill off. What a pain in the a#! they make this.
@brigidkelly20855 жыл бұрын
This video was very helpful for replacing the headlight bulb for my 2010 Ford Focus. There is a sneaky clip on the bottom of the headlight assembly which is why you have to yank that up to get it loose.
@smoberdeen5 жыл бұрын
THIS IS A GREAT VIDEO OF HOW NOT TO CHANGE YOUR HEADLIGHT BULB! Simply loosen the hose clamp on the air box and remove the hose from the air box. Disconnect the wire going to the air box sensor. Remove the two 10 mm screws and lift the air box out. Now locate and remove the bulb by turning it counter-clockwise as if you were sitting in the driver's seat. Installation is reverse order. It only takes about 7 - 10 minutes. If you are replacing the bulb on the passenger side. Remove two 10 mm screws and swing the coolant bottle out of the way. Locate and turn the bulb nut counter-clockwise as if you are sitting in the driver's seat. It only take about 5 - 7 minutes. Installation is reverse order.
@TeafannyGoddard4 жыл бұрын
Thank you! This worked much better for me!
@markluni42342 жыл бұрын
You are right about this. It's a lot more work taking off the bumper/grill. And those little 2 piece rivets are a pain. I learned that when I went to replace a rear brake light. Maybe I was doing that wrong.
@Vacated2045 жыл бұрын
a shop wanted 100 for this job. $18 for the bulb. Do work you’re comfortable with at home folks! Don’t let people gouge you!
@smoberdeen5 жыл бұрын
DO NOT CHANGE THE BULB LIKE THIS....YOU ARE CREATING EXTRA WORK IF YOU DO!!!!! This video causes people to think the engineers are dorked up and they should....well just look at the comments below as a result of this video and there's someone else on KZbin saying to do it the same way. Open the hood and look at the left side of the vehicle as if you're sitting in the driver's seat (all references are from the driver's seat). You will notice the air box. Look to the front of the air box and you will see three 8mm bolts. Go ahead and remove the bolts. Next you will see a large hose that connects to the right side of the air box. Next to the clamp securing the hose to the air box you should see an electrical connector. The connector has a red lock tab at the bottom. Slide the red lock tab toward the front of the vehicle until it stops; then, remove the connector by pulling it forward. Now stow the connector out of the way. Now is a good time to loosen the clamp securing the hose. You don't need to remove the clamp; only loosen it enough to remove the hose. Now grab the bottom of the air box and lift it up out of the way. All you are doing is removing a rubber plug from the inner fender area. The air box should be able to lift out. Identify the connector on the rear of the bulb. Squeeze the tab and pull rearward and the connect should come loose. There are two tabs or wings (for gripping) grab them and turn counter-clockwise and the bulb will come out. You can apply some dielectric grease to the connector if you like and assembly is the reverse order or disassembly. DO NOT TOUCH THE GLASS OF THE NEW BULB WITH YOUR SKIN. IF YOU DO SIMPLY REMOVE YOUR BODY OILS FROM THE GLASS WITH SOME ALCOHOL. If you follow these instructions you will have removed 3 screws, loosened a clamp, and disconnected 2 electrical connectors. You are welcome and have a great day. Be careful when watching how-to-videos on KZbin. I'm not an authorized Ford mechanic but I own four of them. When "SteelTheAnthroWolf" stated the Ford mechanic said to remove the air box; that's all I needed to hear. After all, the Ford mechanic does this task as a living.
@el_rey_kurto5 жыл бұрын
Bro, you just saved everyone a lot of trouble and $100. Many, Many Thanks. I watched the video once, took notes, changed the H13 low/high beam bulb in about 25 minutes. Success ! 2008 US made Ford Focus owners unite. :-)
@shedawg5 жыл бұрын
thank you so much for this... I have the exact same car... color and all and I was mad as hell when I couldn't get to that third bolt... lol... you the real MVP..😀