Пікірлер
@alfonsofabregas8112 6 күн бұрын
VW Passat 2.5 2014 has 2 colant temp sensors!, this in the video is the upper sensor, but the lower sensor is in the pipe down driver side near radiator.... you know?
@DK-jk2cn 5 күн бұрын
@@alfonsofabregas8112 sorry, didn’t know that. Thanks for the tip
@dodgesportsman772 22 күн бұрын
Matco tools are awesome... And they do rebrand but know that many of the steel they make Taiwan use is better than dyi tools such as gear wrench
@devonbinfird7073 Жыл бұрын
Would this be the same on the Volkswagen CC same year?
@boomerguy9935 Жыл бұрын
I replaced mine over a year ago and it works perfectly. However, it recently developed a small leak around the entry point, so I've ordered a new o-ring gasket. I hope that solves the problem.
@MrGhat76 Жыл бұрын
Thank you for the info. Very helpful indeed.
@montanawhite5699 2 жыл бұрын
I was never a fan of coast head lamps. The ones they sell here are more expensive than normal ones but don’t have more than one light setting. $25 or so, or you can buy the $6 ones that have 3 different settings.
@ehabbadr5367 2 жыл бұрын
I think Skoda superb 1.8 tsi sensor in the same location?!!
@brainshares 2 жыл бұрын
Thank you Man
@akirastv999 2 жыл бұрын
Replaced it on my Volkswagen Jetta SE 2012 and the check engine light and code are still there. Came back as P2185 “Engine Coolant Temp Sensor on Radiator Outlet (G83): Signal Too High”
@akirastv999 2 жыл бұрын
Nobody has any info?
@ILLYA_N 2 жыл бұрын
@@akirastv999 the sensor in this video isn't on radiator and its error is p0118
@akirastv999 2 жыл бұрын
@@ILLYA_N Thanks I can see that lol. Replaced that ect sensor 1 and did nothing my original piece was perfectly fine. Once again this is on my side and was asking about it. Their’s 2 ect sensors one is next to engine where the hose is and the 2nd is on the lower left radiator with a pigtail connecto up under the valence shield for the bumper. Code is p2185. Soldered and fixed. Check engine went away right away. No mechanic speaks of such
@ILLYA_N 2 жыл бұрын
@@akirastv999 thanks it's good to know soldering is some normal maintenance work required for these cars :)) I'm having a 2012 jetta 2.5 and that's why I found this video, since temp sensor started to play dances... fans always on etc. So I was looking where the fck it's located :)) In fact this is annoying me since I've already replaced the camshaft sensor, adsorber valve, and now it's temp sensor... and it's on 91 k miles... I also own an old Seat Cordoba 2007 with 2.0 (I know SEAT is not sold in US but I'm in Ukraine, this is just a spanish volkswagen) with 120 k miles from factory and I have never seen any error during it's all life. I knew there can be engine errors only after I bought that Jetta 2.5 haha :)))
@Brock.R 2 ай бұрын
@@ILLYA_N I am currently having the exact issue, I can’t seem to locate the G83 sensor but I’ve replaced the one on the engine. Fans stay on after car turns off and temp gauge fluctuates
@Vicfrios 2 жыл бұрын
Thanks
@doglife5306 2 жыл бұрын
Nice setup dude!
@knowledge791 3 жыл бұрын
Hey I changed my coolant reservoir on the same car and now my temperature light blinks occasionally but the temperature hasn’t increased, do you think it’s a faulty sensory?
@tonycroteau9264 3 жыл бұрын
Nice setup 👍
@coolhandryan 3 жыл бұрын
Perfect vid. 10 minute job. She sounds good now. No more screaming fan. 2013 Jetta 2.5 SE
@j0shtorres 2 жыл бұрын
Check Engine light?
@ILLYA_N 2 жыл бұрын
@@j0shtorres yes with the p0118 error
@whitelightning5937 3 жыл бұрын
I have the 4 drawer version
@SnD340 3 жыл бұрын
The milwaukee stubby is shorter and stronger than the ct761. But I also love my ct761 the feel, balance, style, and the toggle trigger.
@DK-jk2cn 3 жыл бұрын
i was thinking the same thing. Love Milwaukee but some of the 14.4 stuff from snap on is hard to beat.
@class8garage308 3 жыл бұрын
Rigid beats it for the price and warranty
@dodgesportsman772 3 жыл бұрын
Nice box! Check my review on this same box and any advice on my video would be greatly appreciated
@douglasbunch3313 4 жыл бұрын
“I only have some SapOn”
@Nas2k41 4 жыл бұрын
Was this sensor changed because you had a fluctuating temperature gauge on your Speedo cluster? Or some other reason? Your info would be a great help 👍
@d1egofigueroa 4 жыл бұрын
Is that one that reads the temperature in the vehicle or is it the one in the coolant bottle that reads the temperature? My mk6 marks normal temperature even thought once it heated because of a faulty fan
@thecrittergitter7576 4 жыл бұрын
Is that the #1 ect or #2 ect? TDIs it's my understanding that has 2 ect sensors.
@mikedrabick8545 4 жыл бұрын
You guys want good power tools I don't know why more people don't use IR the 7152 is the best 1/2 hands down and the 5132 kicks ass also for the 3/8 best air tools also...
@georgearmanov7332 4 жыл бұрын
Do u have any idea where the ambient air temperature sensor is located on the same car?
@yusefbenjamin8407 4 жыл бұрын
I'm trying to find the same sensor on my Passat
@sombongi 3 жыл бұрын
It’s in front of the Ac condenser and radiator. You should be able to see it looking through the bumper grill.
@dimitristewart2238 4 жыл бұрын
your working on a dodge or mopar. the only manufacture to use that color blue
@beforsaken9388 5 жыл бұрын
I find it strange that people want reversible ratcheting wrenches. Most of the ones I have seen are straight on the ratcheting end so why would you need to switch directions when you can just flip the wrench over????????
@DK-jk2cn 5 жыл бұрын
Once I got used to this set it became second nature to me. I could tell which direction it will turn just by looking at the wrench. You make a very valid point
@lockederbass90 4 жыл бұрын
happend to a friend... normal ratcheting wrench, wrenched a bolt out, didnt have enough space and the wrench was stuck on the bolt :D
@jeremycole6873 5 жыл бұрын
Get the us general cart there unbeatable in price
@DK-jk2cn 5 жыл бұрын
Unfortunately there isn't a single HF in my state and shipping one is not worth the cost
@theone6805 5 жыл бұрын
Yap if you work at my shop, and your tool box lock doesn't work right, you might as well just work to buy tools
@sawyerseidling8950 5 жыл бұрын
Matco pliers are knipex
@youraveragetradesman1613 5 жыл бұрын
mac picks are cool
@youraveragetradesman1613 5 жыл бұрын
honda
@youraveragetradesman1613 5 жыл бұрын
chevy car or a ford car
@katools4846 5 жыл бұрын
Great video man!
@towboatjeff 5 жыл бұрын
Email tekton a pic of your damaged sockets and they'll mail you new ones. They have a great warranty.
@SnD340 3 жыл бұрын
Just so it can happen again after a second use
@mrk896 5 жыл бұрын
One thing's missing.. a couple of spare 10mm's.. especially important since you're doing work outside. They go missing easily enough indoors :D
@1337penguinman 3 жыл бұрын
My portable box has at least 5 I want to say. 1 in 1/2" impact, 1 each in 3/8 and 1/4 deep and shallow, plus a bit. Also, I just got one of those Husky 2 layer cantilever stackable boxes. Absolutely love that thing.
@Ross-xo1ob 5 жыл бұрын
Very nice set up. Simple and effective. Subbed
@uium 5 жыл бұрын
I have the same car! How long it the car to heat up? Mine around 20 minutes !!!! Is it normal?
@DK-jk2cn 5 жыл бұрын
I'm not sure. I already sold it. But 20 minutes of driving is definitely a long time to heat a car up
@uium 5 жыл бұрын
@@DK-jk2cn 20 before i start ( I don't want to drive it when it cold) why did you change it ? What happened ?
@Tailgatesntoolboxes 5 жыл бұрын
Forget that cOAST light...get the quantum headlamp from harbor freight for $10. Its bright as helI.I use mine all the time...I think it's got like 200 plus lumens
@DK-jk2cn 5 жыл бұрын
Is it rechargeable? Because the selling point for me on this coast light was the fact that it was rechargeable
@Tailgatesntoolboxes 5 жыл бұрын
@@DK-jk2cn no but batteries last n I had it 4 about a year
@lakes2land780 5 жыл бұрын
Great tour, beautiful set up!
@darwindropmazda 5 жыл бұрын
Nice tour bro 👍
@wildnomadoverlander 5 жыл бұрын
Do your drawers lock or just the top lid?
@DK-jk2cn 5 жыл бұрын
They lock when the top lid is closed.
@0001070181 5 жыл бұрын
That's a bit of an investment to leave in the bed of your truck.
@DK-jk2cn 5 жыл бұрын
I usually don't leave it in the bed of the truck. :)
@1337penguinman 3 жыл бұрын
I have a single cab truck and mine sits in the passenger seat most of the time, usually with a jacket or something thrown over it.
@SWyatt19 5 жыл бұрын
Are you just starting out or do you have a bigger set up? Would love to see more. You've got a new subscriber right here
@codestools1528 5 жыл бұрын
You could try using wire to organize you’re wrenches I did it in my portably box it works great. Look up diy free wrench organizer and you should find it on here
@bryanlawless1858 6 жыл бұрын
Ullman makes or made picks for Snappy. I've got a set of those also. They handles are different. I prefer my Snappy handles. 6 piece Ullman Pick Set was bout $18.00 on Ebay or Amazon.
@bryanlawless1858 6 жыл бұрын
$70 bux is sweet. I thought most Matco stuff was made in Taiwan? All of mine is. It's still very high quality. I just bought a large set if 1/2 drive deep 6pt Williams...Taiwan, Snap on Industrial yada yada. I'm very impressed witht those also. I'm a die hard Snap on guy just not a mentally ill one. I like my GearWrench Ratchet Wrenches also.
@DK-jk2cn 6 жыл бұрын
I love my tool truck tools but I try not to spend recklessly. Also I try to buy the things I really need on promotion. But I myself love Matco and most Snappy stuff. Some of it is certainly overpriced but they still have things that are worth the cost.
@cenexes12 4 жыл бұрын
@@DK-jk2cn there is no tool on earth worth giving up your grandkids hopes of going to college ! But hey at least they get your used tool set with the added bonus of monthly payments
@smellmaker 6 жыл бұрын
WOW
@mattmcmillan8920 6 жыл бұрын
Nice little tour and some great stuff in that box I just subscribed to your channel looks like it will be a good one thanks for sharing.