@@LeonMedart no the chassis is good, probably just a blade of grass or something that stuck to the bottom in that moment.

@@toolchuck hey thank you for pointing this out, I will be sure to include longer screws for the fronts with nuts. Sorry about that!

@@AllramYT most likely not since the hole positioning is much wider on the Senton. I’ve had a setup made for the Senton but unfortunately it is cost prohibitive to sell (it is too much material).

@@kevin_fine Oh that is sad to hear, the setup looked simple to set up compared to other clipless systems out there.

@@buboonful I got a used Form 2 from my friend a while back for about $1K and just upgraded from there. The biggest plus for Formlabs is their resins. They far outperform the competition, not to mention the consistency of their printers and ecosystem is what you’re paying for. That does make a difference when you’re making product to sell or need reliability.

I haven't had anyone try it yet, but I don't see why not?

@@kevin_fine I will make my order on this Friday.

These works with the stock bumpers, but if you have aftermarket ones you'd be interested to see if they are compatible I can check for you.

The POIZD RC front bumper works with this system. In the rear, as long as you leave the cross support and have a rear bumper that slots into the stock bumper location you should be good. If you have a particular one in mind I can check.

@@kevin_fine INJORA RC Front Bumper and Rear Bumper for 1:10 RC Crawler Axial SCX10 III AXI03007 (Black) I'm thinking of getting those front and back bumpers from Amazon

Yes I deliver to the UK via my Etsy store (links are always in the video descriptions). I will warn you that shipping is expensive so I recommend bundling with other items or friends! Sadly it costs me a lot to ship international, but I do offer it.

@@kevin_fine hi mate thanks for replying but it prompted me in the country drop down box only USA was the only country in the box

@@SteveCook-v2y Here's the direct link, I can assure you I've sold to many people in the UK. Maybe try in a different browser or device: finelaserdesigns.etsy.com/listing/1389228871

Ok bud I have managed to to do it now have ordered thanks so much 👍

@@paramedic1988 yes it fits the latest version

@@kevin_fine thanks very much. I will buy that now.

20 Euro shipping cost to Germany plus taxes?.. I live it better))) have to find another ablution maybe))

@@paramedic1988 Sadly that's what it costs me to ship international. You can also check out AMain Hobbies as they sell it on their website and ebay store (likely to come in the future).

@@philhull29 you can easily spray paint them black as the resin accepts any standard spray paints. Unfortunately the resin only comes in one color so I can’t make the default black sadly.

@@이상호-u5r I sell the parts on my Etsy store for international buyers, the link is in the description

@@DENNISGFISCHER6 hey send me a message via Etsy or my contact form on my website. Then I can reply and you can send me some photos so I can make sure you get what you need. The 6S version only has 3 but the 3S version should have four. Entirely possible that I made a mistake when packaging your order.

Trust me I get the black part, but sadly this resin only comes in this color. Once I get an injection molding machine I'll be able to make them in black, but that won't happen till end of year if I'm lucky.

@@kevin_fine I will attest to the SCX6 clipless kits. My Gladheater is on 8s with a 1250kv motor. I turned a crawler into an Xmaxx, The body has not even thought about popping off at speed. Been singing the praises on KZbin comments. I think I got kits from you for 11 different rigs and only got to the two SCX6s. I'll get there on the rest.

@@AllInRc1971 late this year I am hoping to acquire a small scale injection molding machine. That will allow me to make bulk lots of these common parts (body side pieces) on my designs in black and potentially other colors. In the meantime a little bit of spray paint does quick work and sticks well to the resin! I’ve had many customers paint match them to their trucks.

@@chunkbot based on the trucks I have here that is likely out of date. There are definite differences between them. I design each of these for the specific truck/chassis as it allows me to make them as strong as possible.

@@leonardmitchell996 I invent/design all of these from scratch! Can buy them on my Etsy or Website (always in the description). www.finelaserdesigns.com

Feel free to ask away and I'm sure others can help too.

@@Q8Samurai these are resin printed out of Formlabs Durable resin. It is an engineering grade resin that is specifically designed for impact resistance. There is of course limits as with anything but this should take a good amount of normal driving and jumping. If you’re landing on the roof from 5-10ft+ or more repeatably when you drive then I wouldn’t recommend it. If you only do that every once in a while they should hold up great.

@@ronniecreason7870 these will not, currently working on a version for the 8S outcast

@@rantsandreviews unfortunately the resin only comes in this color, but fortunately the resin accepts any standard hardware paints really well. I’ve had lots of customers paint match them to their cars/trucks!

@@xanderortiz3346 unfortunately the resin only comes in one color, but any standard spray paint will stick to it really well! I have lots of customers who easily paint match them to their trucks!

Do they work on the Arrma Kraton 8s BLX EXB as well?

@@Joe-h1e yes I believe the mounts are identical between the two so I don’t see any reason that you would have an issue.

Just be extra careful with the screws on the body side

Unfortunately I stopped selling these since the demand was very low for this model. Sorry about that!

Unfortunately any pigments would degrade the material performance of this resin. However, it accepts any of your standard hardware store paints really well. I’ve had lot of customers easily paint match them to their truck!

Just got them Today! Installed! Awesome! Thanks Man!