where did you get the skid plates for your treal axles?
@dtrally11 күн бұрын
What aluminium case did you use front and rear? The original from Arrma? And how are these aluminium ones holding up?
@jalee658721 күн бұрын
Best charger and it made directly from a china manufacturer. Its the same as sky rc which is based in shenzhen china. China makes the best hands down. Milwaukee power tools, all apple products . All snap on electronics. China makes the best quality. Tools and electronics.
@JexuanyGuerrero26 күн бұрын
I only ran them once in my xmaxx. Storage charged them and left them for about a year. Went to charge them today and I get short error on both. You think batteries are done?
@bradspaugh982728 күн бұрын
Can you revive dead batts wirh it? I have a dead lipo and can not get it to charge even on NiMH. Need to bump start this battery
@NotoriousBasherAzgigawattgangАй бұрын
There not good,I also have mine swell after 5-7 runs . Got warranty though GenAce the one they sent is having charging issues right out of box. Won't be buying this brand again. I also have Power hobbies 5000 mih for 6 months and all good charges in 35-45 minutes. Will stick to what works .
@BlackThunderRC2 ай бұрын
But it's missing one huge thing. You cannot manually calibrate the voltages on it. I have the SKY RC version and if id known that before id not have gotten it. Besides that good charger for the most part and good review !
@northeastrc732 ай бұрын
There made by the same company so I guess they had to differentiate it some how.
@BlackThunderRC2 ай бұрын
@@northeastrc73 they are the exact same product and have the exact same functionality. So not sure what you mean.
@northeastrc732 ай бұрын
@@BlackThunderRC yeah I meant the name and color
@glenn44522 ай бұрын
Thanks for the video nice charger going to have to get one of these.
@northeastrc732 ай бұрын
I’ve had many over the years and I love this one!
@sunnyv12813 ай бұрын
What bec from castle is that. How I add more volts to my stock scx6 thanks
@northeastrc732 ай бұрын
It’s the waterproof version and you need the programmer to see voltage.
@keldonator3 ай бұрын
I prefer technical rock crawling stuff with 1/24 and 1/10. But, now that I have an scx6 I think it will be ideal for trails so I'll definitely be doing more trails now. I got a little garden cart for a trailer for it now too 😁
@northeastrc733 ай бұрын
That’s a great idea! Yeah idk I kinda like the trails myself with the scx6 so I agree
@keldonator3 ай бұрын
I've heard of this happening to others too. The pin fell out. Is this what happened to you? Did axial fix it for you?
@northeastrc733 ай бұрын
No they were after market steel shafts,I got another pin then used thread lock and waited a day to drive it.
@keldonator3 ай бұрын
Well I've listened to your advice. Picking up my scx6 for $1200 but it comes with about $700-800 worth of stuff of stuff I would have bought for it anyway, plus some stuff I wouldn't have bought for it. I do want a different body for it though. Thanks for the advice.
@northeastrc733 ай бұрын
it's the best way to go in my opinion and welcome to the six club!!!
@m.a.s28304 ай бұрын
Real or vitavon? Which is better? Would real be a secondary cost saving cost n to vitavon?
@northeastrc734 ай бұрын
Both good I just think vitivon cost more
@jasonwarsalla86924 ай бұрын
Thank you for the review
@northeastrc734 ай бұрын
Right on!
@rcceaserleo28755 ай бұрын
Have you ever seen some break the motor shaft on an arrma outcast. Because that’s what happened with mines. So I went and bought another motor put it back together and now I hear grinding. SMH😢
@northeastrc735 ай бұрын
That’s a new one but there’s a ton of torque in these motors. Check your mash and spacing on gears and in diff
@rcceaserleo28754 ай бұрын
@@northeastrc73it wasn’t mesh right thanks
@Jawang855 ай бұрын
I can't find th clipless for th jeep only Honcho do you know if they are the same?
@northeastrc735 ай бұрын
I would think the jeep is totally different
@henriksrensen32205 ай бұрын
Gens Ace Bashing are the best batteries i have ever tried
@northeastrc735 ай бұрын
I guess like I said you can get a bad one from any maker
@scottrobillard69055 ай бұрын
I would of just made it a locked diff I did that with the centre and rear diff and then you only have to worry the outside ring gear
@northeastrc735 ай бұрын
Yeah no I’m all good now so far
@kaiarneberg9203Ай бұрын
Not axles and pins?
@ngc_52025 ай бұрын
Hello I just had this same problem with the hexes being too shallow, I'm using the plastic proline adapter ones currently but I'm curious about your steering. I would like to know if this is normal or not but Does your wheels start to chatter when your fully locked left or right while having the car up off the ground and while also having the throttle on? If you can test this I'd greatly appreciate it thanks.
@northeastrc735 ай бұрын
No mine are fine if your getting chatter check your steering end points
@Paul__FC5 ай бұрын
Subbed, I've got a couple CC01's ive just started tinkering with them.
@northeastrc735 ай бұрын
Old school for sure but a great truck. Thanks for subbing the channel
@Paul__FC5 ай бұрын
That's pretty sweet. I use the RDX1 mini at work for on the clock rips.
@northeastrc735 ай бұрын
Right on!
@jortega619244 ай бұрын
@@northeastrc73can you link the connectors as to where you purchased them??
@northeastrc734 ай бұрын
@@jortega61924 to be honest I don’t even remember lol, maybe Amazon 🤷🏻♂️
@richardfox39245 ай бұрын
Could you list part number
@northeastrc735 ай бұрын
Unfortunately I can’t because I got it through my local hobby shop
@SebastienMongecadet-rq8vq6 ай бұрын
Super vidéo 😊
@northeastrc735 ай бұрын
Thank you
@swhalstead6 ай бұрын
I got one off marketplace for 750. Guy had it for a year and never ran it.
@northeastrc736 ай бұрын
Score!!!
@jozsefsoha89326 ай бұрын
They are wider then the original axels ?
@northeastrc736 ай бұрын
No I don’t believe so
@Kolsch2216 ай бұрын
Do you happen to know if tread axel are compatible with Samix knuckles and Samix differential cover?
@northeastrc736 ай бұрын
That I don’t know, sorry
@Kolsch2216 ай бұрын
@@northeastrc73 on the Treal front axel are the “C-hubs” bearing bigger than stock?
@northeastrc736 ай бұрын
@@Kolsch221 no because I bought fat Eddie bearings and they went right in
@Kolsch2216 ай бұрын
@@northeastrc73 thanks for the response.
@northeastrc735 ай бұрын
@@Kolsch221 sorry for late response but your welcome
@Kolsch2216 ай бұрын
What aftermarket axels do you have?
@northeastrc736 ай бұрын
Treal, and the links are treal as well
@TheZX117 ай бұрын
Thanks for showing these rock lights. So many options for 1/10 but I started with 1/6 (limited add ons). The Club 5 roof rack looks good too. I needed the size to get around in my horse fields.
@northeastrc736 ай бұрын
I’m looking into getting that roof rack as well
@jamierace8447 ай бұрын
Have you done a video that shows you removing the center diff? I need to change mine.
@northeastrc737 ай бұрын
I did not but it’s not hard at all. I did go over what to do in video just didn’t film it like I should have. See if my explanation on how to remove it helps.
@jamierace8447 ай бұрын
@@northeastrc73 I'll check it out again, thanks. I just need to remove the center diff from the vehicle.
@TrokaRC7 ай бұрын
All good info, thanks.
@dickyvandenbrandt7 ай бұрын
Nice Good plan🇳🇱🇳🇱🇳🇱👍👍👍
@northeastrc737 ай бұрын
Thank you!
@thedvsmonkey7 ай бұрын
It's funny, because you'd think that the aluminum would be the stronger setup, which is the case for a lot of items we use for our photography/videography . . . but sometimes you just can't beat good ol' plastic!
@northeastrc737 ай бұрын
Nope in this application plastic is far superior.
@DeejayPozE7 ай бұрын
Santa got me an outcast 8s for xmas. He also put a max 5 and 56118 800 kv in it for me! So stoked to join the big boy RC club!
@northeastrc737 ай бұрын
that's just what I'm running in mine. All I can say is go through the truck and tread lock screws and check all your diffs. also earplug the center when you take it out to install receiver and motor.
@bcborn83987 ай бұрын
Nsdrc all the way
@northeastrc737 ай бұрын
idk I'm pretty happy with the power hobby 701 mg I have it in my outcast 8s as well
@thedvsmonkey7 ай бұрын
Waiting that long must have made your skin crawl!
@northeastrc737 ай бұрын
It was more the point of the customer service was complete trash but I wasn’t letting them beat me for a $100 battery. The actually manufacturer was way more helpful than the company I bought them from.
@RC.Break.Build.Repeat7 ай бұрын
I've always used Zee batteries off of Amazon, but recently, they have been shyt quality, and I've been looking at these bashing batteries from Gen Ace... Thank you for the video. I'm going to order a few now
@northeastrc737 ай бұрын
yeah there great quality and gens ace customer service was way better than tower hobbies. thanks for stopping by the channel
@aliasangelalias8 ай бұрын
Wow, I was almost going to buy from Stupid RC. I think I will take my business elsewhere instead.
@northeastrc738 ай бұрын
I mean they made good on one thing but yeah I'd look elsewhere
@thedvsmonkey8 ай бұрын
Nice instructional video.
@northeastrc738 ай бұрын
Not my best work but to the point I thought lol. Thanks for watching!
@thedvsmonkey8 ай бұрын
That would have sucked to carry through the woods!
@northeastrc738 ай бұрын
Tell me about it lol, I’m bringing tools next time
@chrisryder47098 ай бұрын
I noticed you didnt have the esc seto mounting plate , i hear thats a must , the stock one flexs all over , and if you upgrade the servo it flexes even more , great parts video ,man i dont have mine yet , ive evidently got a lot to do , i got it on black friday sale , then withy points , i paid $750 , its on its way
@northeastrc738 ай бұрын
nice score! yeah I'll be changing esc plate very soon
@RollingAintEasy2478 ай бұрын
Did you have to get any certian bolts to hold steering knucles on ? I cant get my original knuckle bolts to screw into front axle
@northeastrc738 ай бұрын
No I used the hardware I had
@omg_clear-cut8 ай бұрын
🥶Best vs best🥵meggi kzbin.info_yBU2Micnk8?feature=shared
@thedvsmonkey8 ай бұрын
Nice job! They look great!
@northeastrc738 ай бұрын
Thank you!
@jonlaird50828 ай бұрын
The wheels turned out good and I fully agree on doing stuff to save money when I can on the rc side. While vitavon stuff is out of my budget rite now,I did a bunch of cheap upgrades to help performance on my scx6 honcho. I upgraded the foams and using steady foams, dropped the pinion down to an 11t (need a spacer found on ebay), added the bowhouse rc carbon slipper pad and panhard reinforcement kit and bumped up the voltage on the stock servo to 7.4v. I'm happy with the upgrades so far but will do more as time goes on and stuff breaks. Hope to see what upgrades you do to get some ideas. Thanks for sharing
@northeastrc738 ай бұрын
I did a video on all the treal parts I put in but not happy with how I presented that video so will do another soon as I’m adding rock lights next. Thanks for stopping by the channel!
@slobaru70948 ай бұрын
got mine new w/o box from a pawn shop for 850. pretty happy buy. glad i waited an extra 2 weeks to buy or i wouldve bought a brand new one for full price.
@northeastrc738 ай бұрын
That’s a score, I would have jumped on it myself at that price
@pauldashwood28978 ай бұрын
Hi there .what engine do these come with please and are what you have stock axles great video….thankyou
@northeastrc738 ай бұрын
it's the stock motor and no these are treal axles I installed there around $200 each but worth it in my opinion
@pauldashwood28978 ай бұрын
It’s crazy how many parts you can get now days …
@carlwill50099 ай бұрын
Yup, I've been doing research between a spectrum charger or this high-tech 1000.
@northeastrc739 ай бұрын
This one is very versatile
@carlwill50099 ай бұрын
Does it charge with 6S
@northeastrc739 ай бұрын
Yes sir
@iflymatt9 ай бұрын
@@northeastrc73What the max charge amperage if you were charging a 6s battery?
@northeastrc739 ай бұрын
it will do 20 amps per side but make sure you charge within your c rating@@iflymatt
@RC.Break.Build.Repeat9 ай бұрын
I had all three come loose waiting on the center caps now and just checked the rear I just rebuilt and it came apart again as well need those aluminum caps asap 😢😢😢
@northeastrc739 ай бұрын
Even with aluminum I’m having same trouble, going to epoxy the screws in so they don’t back out
@RC.Break.Build.Repeat9 ай бұрын
@northeastrc73 I was thinking that too but would have to just have to buy a bunch of diffs 😄
@northeastrc739 ай бұрын
uploading new video now, pulled rear diff and it was fine so either the gears inside are going or it's in center diff @@RC.Break.Build.Repeat
@markcole64755 ай бұрын
@@northeastrc73why not just lock tight the screws into aluminum?