I think Illuminati got a finger in Coolermasters cookie jar... look at the pcb 2:57 where the 3 pin pump cable is connected they could've added 1 more cable to make this a PWM pump?!? (available headers P. F. +. -. but only F. +. -. are connected) I wonder if this pump is more or less the same as their models with PWM function not considering the price bump. Anyone else ever thought about this??
@kirkmcintyre5311 ай бұрын
You say this is what's inside a "Cheap AIO". It would have been more interesting to see the difference between what's inside a cheap one and what's inside an expensive one.
@owenklein1917 Жыл бұрын
Saying this AIO is cheap is misleading. It’s a very good AIO and is only cheap because it’s way smaller than a 240/360 mm with only one fan.
@supertelettubies49166 ай бұрын
He said “CHEAP” not “UNRELIABLE ”
@kutay_ozkeskin Жыл бұрын
how to unplug pipes from the radiator side ?
@decoymanic3678 Жыл бұрын
refill the coolant can solve the pump very high frequency noise ? although its low , but very annoying
@cybermx8896 Жыл бұрын
I used Loqui Moly Raf 12 con my GTX 1080Ti Hybrid. it comes at a 50/50 premix. Then I do another mix with destilated water. My mix is liqui Moly Raf12 al 20% with destilated water. Idle at 33 and full load at 59
@anonymoushunter9808 Жыл бұрын
Companies state you don’t need to refill them?
@shahzadhaider9195 Жыл бұрын
I hate liquid cooling
@iliasshermani4829 Жыл бұрын
Why
@isaacadjei5130 Жыл бұрын
It a coolant
@eliasroshus Жыл бұрын
I have the same AIO and it's impossible to get apart the logo part to get access to the pump
@mrduke342 жыл бұрын
That scary suspense.
@bakagamingcommentary2 жыл бұрын
no wonder cooler master and asertek had a fall out cooler literary another Chinese company copied their design and try sell as their own use the cheapest nasty components. but as of 2022 they both now racing to bottom who gonna make cheapest AIO that doesn't breakdown during warranty period.
@mdm63192 жыл бұрын
I have the same AIO, but mine does not have the screw under the rubber plug and it's also missing the plastic retaining washer from the impeller axle. It worked fine for couple of months, but it started to make annoying grinding noise. To my not so big suprise, cooler master support was anything other than helpfull even thoug the AIO is still under warranty.
@mdm63192 жыл бұрын
I have the same AIO, but mine does not have the screw under the rubber plug and it's also missing the plastic retaining washer from the impeller axle. It worked fine for couple of months, but it started to make annoying grinding noise. To my not so big suprise, cooler master support was anything other than helpfull even thoug the AIO is still under warranty. Edit: Ups, wrong video. I ment to comment on the teardown video, but hey every comment helps, right?
@gustavo721602 жыл бұрын
Great
@saitvbudol2 жыл бұрын
title of that bgm please
@MoesKeckeEcke2 жыл бұрын
Darude Sandstorm
@downtriptripdown2 жыл бұрын
Can you do ine on a savanle 295x2?
@abubakarsiddique83892 жыл бұрын
Air cooler is best
@vijiarts902 жыл бұрын
water won't evaporates?
@smile12783 жыл бұрын
What liquid do you use to put in the aio?
@kommandokodiak60252 жыл бұрын
use an ethylene glycol antifreeze you want a concentration of about 30% af to water, 50/50 is too thick for the pump and i dont like any less than 30 for a mix metal, the af prevents galvanic corrosion between the copper and aluminium.
@garden0fstone7363 жыл бұрын
Using antifreeze I see 😂
@zultek1003 жыл бұрын
Is the result of using automotive coolant is better that using pc coolant?
@cybermx8896 Жыл бұрын
I used Loqui Moly Raf 12 con my GTX 1080Ti Hybrid. it comes at a 50/50 premix. Then I do another mix with destilated water. My mix is liqui Moly Raf12 al 20% with destilated water. Idle at 33 and full load at 59
@Dobrufusnoretro3 жыл бұрын
oh here it is the assembly video xD
@Dobrufusnoretro3 жыл бұрын
make an assembly video now
@MiirVFX2 жыл бұрын
Reverse the video
@Fatpumpumlovah23 жыл бұрын
Fail
@user-oo8wt3hr1t3 жыл бұрын
Great job all around I feel like the material might lift around the analogue sticks but it wouldn't be your fault they are just awkward to fit -_-
@heid87303 жыл бұрын
Yes it will probably lift up, but to reduce that risk I used a tape primer and gave them a good amount of heat. After a few days it still looks good, but we see how it goes after a longer period of time.
@Violianom3 жыл бұрын
I hate those types of materials on controllers/mice as well. What vinyl wrap is that? I've done a mouse to practice and that was difficult enough. A controller looks fun.
@heid87303 жыл бұрын
It's a 3M 2080 Satin Flip Psychedelic.
@TsarBomb3 жыл бұрын
Thx !!! 10/10. You saved me money !!
@vinslarra22563 жыл бұрын
is all liquid for cooler the same type?
@raikepakisan39903 жыл бұрын
whats the water name ?
@VeerRight3 жыл бұрын
looks like your making some sort of explosives :)
@xxehabxx-60443 жыл бұрын
how to know the amount of coolant needed ? for example for a 120 mm radiator how many ml of coolant needed ?
@Konstantinos3403 жыл бұрын
as much as possible, when you move them around make sure you dont hear air bubbles.
@AmigaWolf3 жыл бұрын
What did you use to clean everything, to remove stuff from everything? Thanks.
@heid87303 жыл бұрын
I used an isopropyl alcohol.
@AmigaWolf3 жыл бұрын
@@heid8730 Ok thanks.
@photographerajay773 жыл бұрын
Thanks
@TheOfficialMystiic3 жыл бұрын
So recently my CPU has crapped out on me and I found out today is from my liquid cooling AIO closed looping cooler can I refill
@TheOfficialMystiic3 жыл бұрын
@PC MODS PC UPGRADES LOTS OF WORK I JUST BOUGHT A NEW ONE AND LOST 4+ OF DATA YEAH
@artonline014 жыл бұрын
What type of bit is used on the screws on the copper plate?
@trileobayu20233 жыл бұрын
Torx screw. The T15 maybe
@MoesKeckeEcke2 жыл бұрын
@@trileobayu2023 just no they are triangular
@EmanuelWecker4 жыл бұрын
bien ahí amiguero! well done frendou!
@aguyonyoutube38204 жыл бұрын
I’m buying a h100 will I have to refill
@codealtf4logn7793 жыл бұрын
No, you shouldn’t. It’s AIO.
@gimmwolff97114 жыл бұрын
Cooler master ?? Cheap ???? NUTS
@hieihachi88014 жыл бұрын
i think the air inside the system should be bled or vented and the radiator to be heated / heat gunned to the cpu's operating temperature while the pump is running. the liquid will overflow from the radiator while heated and at the same time the radiator cap to be closed when overflowing stopped. this in theory will avoid leaks during operation as you filled the desired amount of liquid on cpu's operating temperature. liquid and trapped air inside the system will expand when heated especially the trapped air. your line may bulge or leaks may occur. this is not a problem on coolers with reserve tank. however, it can be a problem on factory assembled AIO. let me know if your refill method was succesful. thanks!
@ashakissoondary3298 Жыл бұрын
Ddxdssddxdxszfxx
@garyr7027 Жыл бұрын
Better way would be to place the system in a vacuum state then charge it back up with coolant using a shut off valve like it's done in AC systems. This would guarantee no air in the system.
@ikbelmezroua55004 жыл бұрын
Thnx dude for this video
@rahul-qm9fi4 жыл бұрын
I'd be too pussy to do it tho
@rahul-qm9fi4 жыл бұрын
Nice brah
@quatro27324 жыл бұрын
what is that green stuff your dipping in the rubber?
@heid87304 жыл бұрын
It is a coolant water.
@gigimuschi74664 жыл бұрын
/Check the timer not the title/ Master Race, reporting in! *CRREPY NOISES THAT TEST YOUR NERVES* PERFECT!!!! Give this guy a yt medal. Fighting the good fight. Gonna go stare outside a window with the rest of my 13minutes. Ahhhh, trees.
@Johny666EU4 жыл бұрын
1:55 what is this device?
@heid87304 жыл бұрын
It is rotary tool with a diamond burr.
@Johny666EU4 жыл бұрын
nice, mate how did you open the 2 screws as 2 of them are one way screw?
@heid87304 жыл бұрын
Here you can see how I did it. kzbin.info/www/bejne/rZOUgZ-gea1lg6c
@barberousse94704 жыл бұрын
What is that liquid you are using for the AIO? Is it a special liquid or just some water with colorant?
@heid87304 жыл бұрын
This is a coolant that came from this AIO.
@mp_7a2 жыл бұрын
@@heid8730 ask for liqud type
@zakariamimeche3107 күн бұрын
@@heid8730 Same here I wanna know where to buy it and what is the name please
@patrickmengler36584 жыл бұрын
People say that you don’t need to refill AIO’s, but then why are they doing it? Is is something that has to be done or is it if you want to..?
@heid87304 жыл бұрын
I did it because there was a problem with a pump and after the repair it needs to be refilled.