ABL Garage

Пікірлер

@fah232 8 күн бұрын

Do I need to drain it twice to get the fluid clean? Or do I wait a while and drain it again?

@letagayhart3621 15 күн бұрын

Needed to see how to do this. Great video. To the point. Thank you!

@cameronlewis8212 18 күн бұрын

Thank you

@GrowSomthing 25 күн бұрын

i tried factory setting .005/ .007 and it still wouldn’t run. i tried .005/.005 and it worked.

@gandl2123 Ай бұрын

I would suggest buying about 15 quarts. That transmission holds about. You do exactly what you did and after you've ran around the block a couple times you've already mixed all that old with a new you just put in.... So waiting a month or 6 months is nonsensical. Drive it and warm it up. Take it in the garage and do it again. 4 and 1/2 five more quarts driving around the block a couple times. Pull it back in the garage again and do it a third time. The third time the fluid should be pretty clean.

@TwoCaptainsOneShip Ай бұрын

Thanks! Gonna go give it a try now. 😮😮

@ablgarage Ай бұрын

Good luck! Thanks for watching!

@TwoCaptainsOneShip Ай бұрын

@ thanks. The area around the stem was the hardest part but I got it. Used a wrench to separate the tire from the rim to create some space to get it in. Thanks again

@angelabrackett4408 Ай бұрын

Thank you so much!

@ablgarage Ай бұрын

Your welcome! Thanks for watching!

@fall3nangel858 2 ай бұрын

I have a small cot in mine and I find myself sleeping alot when hunting it so peaceful. I used to do it to get away from my wife but I left her a few years ago.

@MaxHolloway-y1k 2 ай бұрын

See that more an more guys won't sit in a tree stand anymore have to be in a full box blind with a heater to go hunting ....yeah to go hunting like what has happened to the men

@ablgarage 2 ай бұрын

I have never sat in a tree stand always on the ground or in a blind and froze. Last year my son hunted with me and he got cold quickly and didn't want to hunt. This year we will be warm. Does that make me less of a man?

@EdwinHernandez-se2lb 2 ай бұрын

Just bought one of these that was sitting for a few years! Hope I can get it running.

@ablgarage 2 ай бұрын

If it's hard to start it probably needs a valve adjustment.

@EdwinHernandez-se2lb 2 ай бұрын

@ thanks man! I’ll definitely pick your brain if I get stumped is that’s okay!

@ablgarage 2 ай бұрын

Sounds good! Thanks for watching!

@EdwinHernandez-se2lb Ай бұрын

@@ablgarage any way I could get ahold of you?? I got it to turn over. I’m getting fuel, but no spark at the plugs.

@ozzstars_cars 2 ай бұрын

Service info states engine running and transmission warmed up while checking the transmission fluid level with the dipstick. Checking with the engine off is NOT accurate!

@ablgarage 2 ай бұрын

Thank you for the info!

@annaeckley2510 2 ай бұрын

This is what the dealership wanted to charge me $500 for?

@ablgarage 2 ай бұрын

That sounds about right. Do it yourself it's not hard. Thanks for watching

@AstridGaeldom 2 ай бұрын

So we did this and its still just clicking, we have dont a new battery, oil change, new spark plug, new starter, new magnito, and still its just clicks and doesnt starts

@ablgarage 2 ай бұрын

If your getting a click it's either a bad battery, bad connection, bad starter, or bad starter solenoid. Does you engine turn freely? Depending on the engine it may need the valves adjusted. Some have automatic compression releases and if the valves get out of adjustment the engine will be very hard to spin. So it could be that also. Try pulling the spark plug out and see if the engine will spin then. I have a video on how to adjust the valves also. Hope this helps

@samueloviedo4027 2 ай бұрын

Thanks

@ablgarage 2 ай бұрын

Thanks for watching!

@willpittman1662 2 ай бұрын

🎉 thank you sir I missed what oil but found everything else useful

@ablgarage 2 ай бұрын

Thanks for watching!

@michaelhernandez4026 2 ай бұрын

How did you diagnose it was the solenoid before replacing

@ablgarage 2 ай бұрын

You have power on one side of the starter solenoid and when you turn the key it clicks and if you check with a meter you still only have 12v on one side of the solenoid. The clicking should close contacts in the solenoid and send power to your starter. Hope that helps

@ernestodiaz4106 2 ай бұрын

I need help on troybilt bronco that as soon as you turn the key and turn the motor on it backfire and it Al’s slow on turning the engine over any suggestions thank you

@ablgarage 2 ай бұрын

I would suggest adjusting your valves. I have a video of adjusting the valves. Hope it helps

@budmiller7814 3 ай бұрын

did you leave the old tube in the tire?

@ablgarage 3 ай бұрын

No. There was no tube in this tire. They don't come with tubes when new. They are tubeless tires. But when they leak air it's much cheaper to just put a tube in it then it is to replace the tire.

@shemacferguson6190 3 ай бұрын

If it doesn't matter which sides the red wires go on, why did you say match it up exzctly.

@ablgarage 3 ай бұрын

Whenever you take something apart to replace it, you put it back the exact same way it came apart. In any situation. I'm just pointing out it doesn't matter which red wire goes where In this case. One comes from the battery and the other goes to the starter. They don't matter. Your starter solenoid is just a big switch when power from the ignition is applied the two red wires get connected. Hopefully that clears things up.

@ashbycook472 3 ай бұрын

You are the first and only person to tell me it doesn't matter which red wire goes on which terminal. THANK YOU.i

@ablgarage 3 ай бұрын

Your welcome! Thanks for watching!

@treemnmw 3 ай бұрын

Great video thanks for your help!

@ablgarage 3 ай бұрын

Thanks for watching!

@ivarsmatisons 3 ай бұрын

Paldies par informaciju 0:45

@ablgarage 3 ай бұрын

Thanks for watching!

@ad351 3 ай бұрын

Thanks mate,great video

@ablgarage 3 ай бұрын

Thank you!

@chisawich4882 3 ай бұрын

Which way did u turn to loosen atf fill plug

@ablgarage 3 ай бұрын

It's normal threads but mine was extremely tight. I had to use a breaker bar to get it loose.

@ozzstars_cars 2 ай бұрын

Lefty loosey.

@ozzstars_cars 2 ай бұрын

Service info states engine running and transmission warmed up while checking the transmission fluid level with the dipstick. Checking with the engine off is NOT accurate!

@GorbyP 4 ай бұрын

He never took the old one out?? How do you do that?? These videos suck

@ablgarage 4 ай бұрын

They don't come with tubes in them when they are new. They are tubeless tires. But the tires dry rot or get holes in them and it's cheaper to just put a tube in them rather than buy a new tire. This wheel and tire had no tube in it.

@GorbyP 4 ай бұрын

@@ablgarage ooooohhhhhhhh

@GorbyP 4 ай бұрын

What is the bead?

@pauljohn5554 4 ай бұрын

Thank you thank you thank you,

@ablgarage 4 ай бұрын

Your welcome! Thanks for watching!

@realfortin 4 ай бұрын

Thanks for being concise and informative.

@ablgarage 4 ай бұрын

Thank you!

@510DOEBOY 4 ай бұрын

Weak

@ablgarage 4 ай бұрын

Thanks

@daleclark4208 4 ай бұрын

There's supposed to be one on each spindle and two on the deck. I can't find them. Good luck

@calebgodwin3224 4 ай бұрын

what springs and tire size?

@ablgarage 4 ай бұрын

The front springs are stock ones. The rears are stock height but heavy duty ones. The jeep has spring over axles instead of the factory spring under. Tires are 33x12.5x15.

@timmypstyle 4 ай бұрын

This is a lifesaver. I have a huskee that is pretty much exactly like this lawn mower. Only problem is the bolts holding the solenoid won't come out because the nuts are stuck. Can't get a socket on it because the solenoid blocks it. But I took off way more than I needed to to access it.

@ablgarage 4 ай бұрын

Thanks for watching!

@timmypstyle 4 ай бұрын

@ablgarage I got the nuts off of the bolts lol. Thought they'd be the same size head as the bolts but they were bigger. So once I got the bigger socket on, I got it off.

@nancysmith2874 5 ай бұрын

Some people don’t know what the bead is

@ablgarage 5 ай бұрын

Sorry for not explaining. The bead is where the rim and tire come together.

@Billscallep667 5 ай бұрын

Make it fast

@NoahsMowerProjects 5 ай бұрын

Make it a Go cart. it wouldn’t do good as a pulling tractor.

@jacobstroud1288 5 ай бұрын

do I need to put the plug back on before testing or will it compress out?

@ablgarage 5 ай бұрын

I would put the plug back in.

@kermitspig1728 5 ай бұрын

Turn it into a go kart type thing

@Officialminibikes 5 ай бұрын

Agreed

@kermitspig1728 5 ай бұрын

@@Officialminibikes you just got yourself a subscriber. I’ll be back to see what you decide on doing!

@Officialminibikes 5 ай бұрын

@@kermitspig1728 perfect thank you man🙏🏿

@johnbasco6960 5 ай бұрын

Make it fast

@deborahmeaders5022 5 ай бұрын

Paint it❤❤❤

@addisonsmith2112 5 ай бұрын

If the kids love it turn it into a small pulling tractor

@stephenalexander746 5 ай бұрын

Dude I really appreciated your video. Getting that bead to release did take a few more punches for me. Sure didn't want to spend all the money for a new tire, when my tread is still great. Again thank you, and I pray that God Blesses you Too! Stephen

@ablgarage 5 ай бұрын

Thank you! Glad the video helped!

@patrickshade1281 5 ай бұрын

Great video! I appreciate the valuable information.

@ablgarage 5 ай бұрын

Thank you!

@tylerdunn41 5 ай бұрын

Just followed your video. Good info for a DIYer. Great tips on the 6point socket and 4qts. Thanks for the info!!

@ablgarage 5 ай бұрын

Glad it helped!

@paulmonk7820 5 ай бұрын

Easier to break the bead by standing on the tire laid flat on the floor.

@tonypagan8852 5 ай бұрын

I have a pony riding mower and when I turn the key it does nothing no crank or any noise I checked all sensors and they seem to be working could this be the problem?

@ablgarage 5 ай бұрын

I would think it would be the brake/clutch switch. It has to be pushed in to start the mower. You would get a clicking noise of some kind of it was the starter solenoid.