hotrodhocke

Пікірлер

@georgewn4myy886 4 ай бұрын

too bad you couldn't sub that noise for an intelligent narration

@Glens1965 4 ай бұрын

Good Times!!

@hotrodhocke 4 ай бұрын

Yep, but I am still worried that I caused him to lose control and hit that mailbox as I just had tightened up his r&p steering.

@Glens1965 4 ай бұрын

I'm sure those 10 year old tires had nouthing to do with it.😁

@millerso8 6 ай бұрын

What about balancing? I'm sure you're running it by now or have ran, any vibrations w/o balancing? You did a great job on it I must say! dbl thumbs up !!

@hotrodhocke 6 ай бұрын

Thanks! I will hopefully find out in a couple of month as I am still working on the car. I've shorted a number of driveshaft through the years and never had a problem with vibrations, but we'll see...

@THAI-j30 2 жыл бұрын

Kul och se lite fina bilar och inte en massa sönderhoppat junk

@errolpoxleitner9586 2 жыл бұрын

I did this swap only I have a 68 coup 428 long tube headers and 4 speed took me about 4 hours.

@eliashvass3090 2 жыл бұрын

What room number was it?

@hotrodhocke 2 жыл бұрын

I'm sorry but don't remember as it was almost 9 years ago. Never the less a really nice room and hotel that I would recommend.

@jasonkimmel3061 2 жыл бұрын

You spend all week in the shop making your masterpiece and then your girl comes out and give you RBF. Mine is the same way. Meanwhile I’m supposed to be impressed that she painted a yogurt cup and put fake flower in it.

@Anders.W. 2 жыл бұрын

Härlig mångfald av olika åk .

@tonymontana4349 2 жыл бұрын

The sleeve u slide in and clip on they also sell that in that website? Thanks before I forget the same size for all 3 pieces

@MikeMiller-fc2cc 2 жыл бұрын

How much would you charge to shorten a driveshaft?

@hotrodhocke 2 жыл бұрын

Very hard to say as this is something that's part of my hobby.

@andersnilsson1171 3 жыл бұрын

Cool bubbla

@danlivni2097 3 жыл бұрын

That Black and White Roadster with the number 32 looks great 46:50

@peterburlin8657 3 жыл бұрын

Det var roligt att se hur mycket bilar det finns hos er i dag det är som inte burträsk på 60talet häls. Peter i burträsk osten hjärta wb

@cruisepossum2973 3 жыл бұрын

Great stuff! Keep up the great work. ❤🏁

@thomasandersson5868 3 жыл бұрын

Den Svarta pv med ekerfälgar... skitsnygg 👍👍..ja o mycket annat finf förståss

@JaceyExe 3 жыл бұрын

Nä, vad trist! Hoppas det går att fixa?? /Linda

@briankarnowski5614 3 жыл бұрын

That a half inch drill you're powering it with?

@hotrodhocke 3 жыл бұрын

Yes, that's correct.

@luisetorres5760 3 жыл бұрын

Hi, what’s the tools name?

@hotrodhocke 3 жыл бұрын

I guess you're asking about the level or angle finder that's used in the video. It's a tool named "Inogon" made here in Sweden back in the 1980s and from what I can find not available for sale any longer as it most likely has been replaced by the digital angle finders available today. The main feature of the tool is of course the Moiré pattern used on the fixed and moving parts of the tool that makes it really easy to see from a distance if something is in parallel with something else or if something has the angle you want it to have.

@jonathangehman4005 3 жыл бұрын

Great content, VERY helpful. The intro and the soundtrack are awful, don't know if that matters.

@felixcat9318 3 жыл бұрын

Very Nicely Done! I particularly liked how you fabricated the foot switch and your use of stainless steel strapping to secure the motor to the (reinforced) frame. Really neat and efficient, thank you for sharing you greatly improved bead roller. Subscribed.

@badmashliker5785 3 жыл бұрын

Order accept iron armour helmet i want to buy now

@badmashliker5785 3 жыл бұрын

Conract me 9368158105

@ToplessTattoo 4 жыл бұрын

Speed control foot switch? You like that rather than set speed?

@hotrodhocke 4 жыл бұрын

Yes, kind of like driving a car, fast when straight, slower around corners.

@b67fstb 4 жыл бұрын

Which order number is this kit from Borgeson ?

@hotrodhocke 4 жыл бұрын

This is the kit we used: stevesmustangparts.com/store/index.php?main_page=product_info&cPath=11_140&products_id=18693

@ronaldhorne5106 4 жыл бұрын

I know the end result will be first class, but you sure seem to delight in taking the longest way around the problem.

@andersuhrvik4744 5 жыл бұрын

Nice!

@65sohc 5 жыл бұрын

Great workmanship. I just finished reading the Car and Driver article on the classic American car culture in Sweden. They were into rockabilly. You're into doo wop. Can't go wrong either way as long as you're in a Mustang.

@hotroddaddy-et4xg 5 жыл бұрын

i run a ranchero club.. world wide we have over 1100 members... members from all over , every european country, africa, australia,south america etc. look us up on fb.

@hotroddaddy-et4xg 5 жыл бұрын

you like north american hot rods. very cool show. we have at least 3 in my city every weekend sunday night cruise has 2 BIG shows with at least a thousands vehicles.NO new stuff has to be 30 years old or older unless it's a factory hot rod (shelby mustang,hellcat,vette ,copo camaro ,ferrari,lambo etc.).certain parts of canada are frozen in ice for 6 months so we have to make up for lost time.the cars here would astonish you.every make model from every country and every period.we have 19 hours of daylight in the middle of summer, so you have lots of time for pics..we have lots of canadian models and makes you won't find in the u.s.

@clist9406 5 жыл бұрын

That's sketchy as fuk

@RobertSmith-wu1eb 5 жыл бұрын

The look on her face is like I cant believe you've been out here all week working on this piece of crap tool!!!!

@mrFreakingGamer 6 жыл бұрын

Hello does it work for the 1.3s ?

@hotrodhocke 6 жыл бұрын

Unfortunately don't have a clue. My initial intention was to use it on my '67 Ford Mustang which would have required extensive modifications that never happened. Today it's actually the major part of a drill press stand I've made.

@4speed3pedals 6 жыл бұрын

Excellent choice of music!

@AustinBachman 6 жыл бұрын

Just beautiful, wishing you both the best

@dannyfackler7104 6 жыл бұрын

How much of the tube did you actually cut off and did you use the Borgesson steering shaft or do you have a collapsible shaft?

@hotrodhocke 6 жыл бұрын

We used the Borgeson shaft that was included in the kit and the length of the shaft pretty much determine how much to cut the column.

@dannyfackler7104 6 жыл бұрын

I had the old solid shaft system and ordered the Borgesson kit but it didn't include the shaft. I just ordered the shaft and rag joint and wondered how much shaft to leave exposed for the stock wood grain steering wheel to mount to shaft. Knowing that would tell me how much I will need to cut off column tube.

@hotrodhocke 6 жыл бұрын

If I remember things correctly we testfitted the steering wheel, column tube and the Borgeson shaft before we decided how much to cut the column tube. One other thing I'd like to share is the bracket I made later to attach the steering column to the firewall, scroll down on this webpage and there's pictures of it: fyi.boardhost.com/viewtopic.php?id=7908

@dannyfackler7104 6 жыл бұрын

hotrodhocke I saw that. The shaft that comes from Borgesson includes a firewall bracket.

@hotrodhocke 6 жыл бұрын

Yes it does but it's more or less useless (unless they've improved it) and that's why I took the time to come up with something that actually works.

@paulrosebrock 6 жыл бұрын

Watched this 10times...thanks...looked through McMaster Carr to match up parts. You mind posting about that Clovis and hold down? Plus do u have a part number on the hurst lever? Great work. Thanks! I’m doing this to a 380SL with a SBC and a T5 trans from a firebird..

@hotrodhocke 6 жыл бұрын

I live in Sweden and bought the parts locally, the clevis rod ends I used are size M12 which is almost equal to 1/2". This is the closest design I could find at McMaste Carr: www.mcmaster.com/#clevises/=1cyys4g The Hurst lever has "8550" stamped on it and I think this might be it: www.hurstshiftersonline.com/productcart/pc/Hurst-Chrome-8-1-2-in-Long-shifter-stick-Knob-1983-2004-Mustang-T5-p196.htm

@paulrosebrock 6 жыл бұрын

@andymarquez1030 6 жыл бұрын

Vad är det för band?

@hotrodhocke 6 жыл бұрын

Micky and the Adels, kolla här: kzbin.info?search_query=micky+and+the+adels

@killershade2015 6 жыл бұрын

how much would this cost

@hotrodhocke 6 жыл бұрын

This is the kit we used: stevesmustangparts.com/store/index.php?main_page=product_info&cPath=11_140&products_id=18693

@guspompa3283 6 жыл бұрын

Well some time at you tube one man going to have nice music

@jimstover6747 6 жыл бұрын

I don't think thats OSHA approved. LOL

@roadstar499 7 жыл бұрын

I have this same car i bought a couple of months ago...anyone know where the convertible motor switch is so i can take top down...looked everywhere...thanks

@JonYugen 6 жыл бұрын

It should literally be in front of the center console lol.

@richardh5721 7 жыл бұрын

If your looking for help or direction this isnt the video for you.. this is no less than a 4 to 8 hr job shown time lapse in a few minutes.. Pretty Much Useless for the DIY guys... Thumbs down all the way

@homemadetools 7 жыл бұрын

Nice build! We featured in our HomemadeTools.net newsletter: mailchi.mp/buildthreads/vise-stop-hand-turning-rest-router-plate-alignment-tool-342681

@hotrodhocke 7 жыл бұрын

Wow thanks!

@Daniel60549 7 жыл бұрын

I'm planning on something very similar. Only my modification will be to to convert to a remote cable shift with dual push-pull control cables. I had come up with a number of designs, but the integration of an adapter to the OEM housing as you have done is very similar to what i had planned to use.