Пікірлер
@tawdew 28 күн бұрын
Very informative and thanks for the dowel pin information
@anotherguysgarage-OG 26 күн бұрын
Thank you for watching! I appreciate you! Happy holidays!
@Hillbillygarage1215 Ай бұрын
I know this video is a bit old but... 1. Thanks for the video and great job. 2. I know from experience the included bolts do catch enough thread to hold a 3rd Gen HEMI but I finally remembered (between rebuilds) to pick up longer bolts and another flat washer, to add thickness with the included washer. So now I really feel safer with the mounting.
@anotherguysgarage-OG Ай бұрын
Thank you for watching! I'm with you, more engagement, the better. Thanks again!
@finallyitsed2191 Ай бұрын
You can save yourself a lot of grief by placing a mirror where you can see the back of the bellhousing from the front. Great explanation though.
@anotherguysgarage-OG Ай бұрын
That's a great suggestion, thank you! Thank you for watching!
@TABORA670 Ай бұрын
On those BTR valve seals , do you tap those in to seat them properly? Or just pushed by hand ?
@anotherguysgarage-OG Ай бұрын
I was able to push them by had with no issues. I thought I remember watching in another video that someone was designing a tool to push them down and recommended not tapping them . I thought it was this video by Speedway motors "LS Engine Cam Swap with Speedway Motors BTR Truck Norris Camshaft" but they just mention "make sure they are fully seated, but didn't show it. I'll keep looking and send you the name (not sure I am allowed to link) of the video where they "pressed" them in with a wrench.
@anotherguysgarage-OG Ай бұрын
Search "BTR changing valve springs" kzbin.info/www/bejne/rJ7Iimacqr53rLssi=2FJONSP5s5pppcg5 The audio is a little messed up, but they talk about pressing in the springs. I did not need to do this, as they pushed right on for me. I hope this helps!
@campinwiththeconfers Ай бұрын
We men don’t like to ask for help. I was good until you started with the math - oh boy. Not my thing. That’s why I don’t do this kind of work. lol 😂
@anotherguysgarage-OG Ай бұрын
Thank you! The team at Silversport Transmissions is awesome! They have been beyond helpful anytime I had a question or needed some insight during the multiple installs of my transmission. Thank you for watching!
@campinwiththeconfers Ай бұрын
Great job! Informative and entertaining! 10lbs poop in a 5 lb bucket. 😅
@anotherguysgarage-OG Ай бұрын
Thank you for watching! I appreciate you!
@michaelachtziger3051 Ай бұрын
Would’ve never noticed until I bought it!
@anotherguysgarage-OG Ай бұрын
Or if the Energy Suspension kit you bought from Amazon has one of each and you didn’t notice… ask me how I know! Thank you for watching!
@PeterHatch-mx7zc Ай бұрын
Replace all nuts and bolts grade 8 try make heads same size plus i made it could turn head a s/camm a slack adjuster and two pillow block bearings lot of videos on utube i cut the top tube off put square tube over up stand to high used flanges bearing any best for Christmas
@anotherguysgarage-OG Ай бұрын
Great upgrades to the stand! Thank you your commenting and thank you for watching!
@PeterHatch-mx7zc Ай бұрын
@anotherguysgarage-OG your welcome
@nicholassnow534 Ай бұрын
Bro I can’t explain how helpful this video is. My SST Bellhousing was too small to fit on my TKX(it was .002 too small). So I have a factory Bellhousing I’m remeasuring and your video has helped so much. Thank you!!!
@anotherguysgarage-OG Ай бұрын
You made my day! Thank you for the feedback! I’m glad the video was of value. Yes, I’ve experienced the same with the Silver Sport bellhousing. Everything seems to be an interference fit; both dowel holes as well as the mating surface of transmission. Thank you for watching, enjoy your TKX!
@supercharged6771 Ай бұрын
You always want to go with the one piece push rods, ask me how I know.
@anotherguysgarage-OG Ай бұрын
Absolutely! Thank you for watching and thank you for commenting. I appreciate you!
@toma2952 Ай бұрын
As always, lots of detail, ya, the secret sequence was cheesy, but it kept things interesting!
@anotherguysgarage-OG Ай бұрын
Glad you enjoyed it! Thank you for watching!
@johnmccloskey8761 Ай бұрын
I want one!
@anotherguysgarage-OG Ай бұрын
Sweet old survivor! Thank you for watching!
@philipparge8064 Ай бұрын
You can get much smaller dial indicators!
@anotherguysgarage-OG Ай бұрын
Thank you for the suggestion and thank you for watching!
@patrickwendling6759 Ай бұрын
thank you for your knowledge and videos TRUMP USA 🇺🇸 MAGA
@anotherguysgarage-OG Ай бұрын
Thank you for watching and supporting the channel!
@toma2952 2 ай бұрын
Wow! That truck looks better than new! Mint!
@anotherguysgarage-OG 2 ай бұрын
It does! I’m pretty sure it wasn’t as nice as it is now, the day it was born. Thanks for watching!
@toma2952 2 ай бұрын
Love to see cars getting driven! It is sweet!
@anotherguysgarage-OG 2 ай бұрын
Us too!
@michaelachtziger3051 2 ай бұрын
Great idea putting the date on your thread sealer! Great video!
@anotherguysgarage-OG 2 ай бұрын
Glad it was helpful! Thank you for watching, way to catch those details!
@neilariola1822 2 ай бұрын
Hi. Nice vid. I’m the same way on the condition of boxes. Looking to buy the same hitch. Just wondering if you have a kick sensor on the tail gate? If yes, any issues? Thanks in advance.
@anotherguysgarage-OG 2 ай бұрын
That’s a great question! To be honest I had to ask the wife, she thinks no, although I found online that it was standard on the XLE. That said, I don’t remember seeing any sensors and it absolutely doesn’t impact the operation of the hatch/tailgate when you use the button. I’ll doublecheck this evening. Thank you for watching!
@anotherguysgarage-OG 2 ай бұрын
I just verified, our Highlander does not have the sensor and I saw in a video that an installed trailer hitch will interfere with the operation of this feature and it should be turned off. Thank you again for your interest!
@neilariola1822 2 ай бұрын
Thanks for getting back to me and verifying those details.
@dougedwards8022 2 ай бұрын
Correct. And it is a standard sae. Any bolt with a decimal # on the head is a metric bolt, our world has left the mechanics out and they had better wake up,do hard to find a shop to repair cars anymore .
@anotherguysgarage-OG 2 ай бұрын
Thank you Doug great input!
@ryansavage2733 2 ай бұрын
Nice work… you held the clutch alignment tool in place while tightening. Soo many guys let it droop down and then wonder why their trans input shaft doesn’t line up making it harder. Good job!
@anotherguysgarage-OG 2 ай бұрын
Thank you for the comment, I very much appreciate it! Thank you for watching!
@campinwiththeconfers 2 ай бұрын
The star pattern is always key! lol heavy breathing chapter 😂Nice work 👍
@anotherguysgarage-OG 2 ай бұрын
Thank you! Ya, it was a long evening of editing, getting used to a new program...couldn't figure out how to edit out my panting, so I thought I would embrace it. I'm glad you liked it, thank you for watching!
@nickenglish4819 2 ай бұрын
But why not just one really big blower
@anotherguysgarage-OG 2 ай бұрын
Not sure, but it looks and sounds awesome. You can see this beast getting tuned on the Steve Morris Engines channel. Search “twin whipple Camaro” and it will come up. Thank you for watching!
@toma2952 2 ай бұрын
That video is worth a watch, just to see it get tuned. At one point he loses a pulley.
@FilterYT 2 ай бұрын
Well done, good to know. Thanks
@anotherguysgarage-OG 2 ай бұрын
Thank you for watching!
@DaveAlten 2 ай бұрын
11k views?
@anotherguysgarage-OG 2 ай бұрын
Ya, best so far, but low in the shorts world.
@rickyfulks6656 2 ай бұрын
Im sure Tremec honors warranties on high performance,beat thehell outta trannies
@mikeheggem9488 2 ай бұрын
Get yourself a quality pair of knee pads for around the shop. You can then get rid of those mats.
@anotherguysgarage-OG 2 ай бұрын
Thanks Mike, that's a great recommendation...I just need a lift! HA!
@ChrisS-oo6fl 2 ай бұрын
Dude if you spin the crank and thus, the dial indicator 180° from a mark, the top dial will then be on that very same mark. The pin of the indicator is a straight perpendicular line and the tip of the pointer is exactly 180° from the point is the knurled knob. Just turning the dial until the top of the pin is lined up with the original line is far more accurate then drawing random eyeballed marks across from each other. At the end of the video you started at an arbitrary line and zero. The indicator landed nearly perfectly at 180° from that zero point with 7° run out. As such there’s no point in doing a second 180° because if you zero the dial then 180° must be 7° off so we can just divide by 2.
@anotherguysgarage-OG 2 ай бұрын
Thank you Chris, and thank you for watching all of the video. I appreciate you. You are absolutely right, but what is hard to see is that my dial indicator didn't line up directly through the center of the circle, otherwise yes, the plunger ends would have lined up exactly 180 degrees from each other. Thank you again!
@christopherwall5018 2 ай бұрын
Great video !
@anotherguysgarage-OG 2 ай бұрын
Glad you enjoyed it, thank you for watching!
@Anthony-rn6gl 2 ай бұрын
My TKX will be here next week! Going to use your video to do this!
@anotherguysgarage-OG 2 ай бұрын
Thank you for watching. SST really made it easy. The hardest part is getting the dial indicator in the bellhousing. My last engine was in spec as is, I hope yours is too, makes it simple!
@JamesBower-l9d 3 ай бұрын
Thanks it’s very informative.
@anotherguysgarage-OG 3 ай бұрын
Thank you for watching, I appreciate the feedback!
@hankclingingsmith8707 3 ай бұрын
I watched all the others. Yours is most thorough video on the subject
@anotherguysgarage-OG 3 ай бұрын
Thank you very much! I appreciate that!
@michaelachtziger3051 4 ай бұрын
Like a mirror
@anotherguysgarage-OG 3 ай бұрын
Ya, not too bad considering how bad the casting was…truth is, you’ll see very little of it once the truck intake goes on. Thanks for watching!
@randyedwards3244 4 ай бұрын
Nice BUT it could really use the "Two door delete" option!
@anotherguysgarage-OG 4 ай бұрын
He's a young guy...he has time. Right now focused on going fast...maybe he'll give it a DD Speed shop delete! HA!
@johnnycrash3270 4 ай бұрын
Well that's it now I'LL have a BONER for at least a week
@anotherguysgarage-OG 4 ай бұрын
Lots of cool cars! Thanks for watching!
@davidcagle9775 4 ай бұрын
Those o so sick fitty 6
@anotherguysgarage-OG 4 ай бұрын
yep!
@Raul28153 4 ай бұрын
what manufacturer?
@anotherguysgarage-OG 4 ай бұрын
The first is generic made in Taiwan, the second Pittsburgh. Thanks for watching!
@amypeplinski6276 4 ай бұрын
Must be one of them chrome-chineseium sockets, it's 2024 I guess we all got at least a few mixed in there somewhere. You know, all you ever here about on the news is fentanyl, migrants, and "viruses" but the ubiquity of garbage ass tools thats the real crisis!
@anotherguysgarage-OG 4 ай бұрын
People keep saying they are the same as the "expensive" brands...they need to stop, because they aren't. Thank you for watching!
@jamespaul4994 4 ай бұрын
Those engines have nice cars
@anotherguysgarage-OG 4 ай бұрын
Yes they do! HA!
@Johnnycdrums 4 ай бұрын
Nice Fairlane.
@anotherguysgarage-OG 4 ай бұрын
Indeed it is!
@Carlito-Fxwg 4 ай бұрын
All badass but the Nash wagon, the Metro and the Chevette are my favorites..
@anotherguysgarage-OG 4 ай бұрын
All very cool, good choices! Thank you for watching!
@thatguypinky2913 4 ай бұрын
That's a chrome socket you painted black if it split like that
@migsEK 4 ай бұрын
i’m pretty convinced that’s what some companies do especially on amazon i bought a cheap set and my chrome sockets are beefier
@anotherguysgarage-OG 4 ай бұрын
The video is legit. I can totally see why you would think I painted it. But as Miguel says in his reply, the company that produced it, is basically doing just that…passing off a general purpose socket as an Impact socket by making it black. Thank you for watching, thank you for commenting!
@toma2952 4 ай бұрын
I like a good deal as much as the next guy… but tools I plan to use a lot, I’m willing to pay up if there is a real quality difference. My kids won’t have to buy them, they’ll last. I agree!
@anotherguysgarage-OG 4 ай бұрын
Lots of folks saying they are the same...no, they're not. Thanks for watching!
@The_Notorious_N.O.E. 4 ай бұрын
@@anotherguysgarage-OG I couldn't see the lettering clearly. What was the brand that split?
@anotherguysgarage-OG 4 ай бұрын
The first socket socket just says Taiwan on it, no brand claiming ownership. The second socket has “Pittsburgh(R)” printed on it.
@toma2952 4 ай бұрын
Really awesome marching the patina on the new parts to the original, very well done!
@anotherguysgarage-OG 4 ай бұрын
Glad you like it!
@toma2952 4 ай бұрын
That wagon is bad ass.
@anotherguysgarage-OG 4 ай бұрын
It totally is!
@toma2952 4 ай бұрын
You have got to love a gasser. I’m a fan of the Blue glitter paint on the roof, very cool.
@anotherguysgarage-OG 4 ай бұрын
Right on!
@stevemcelfresh85 8 күн бұрын
Thanks for the video. It's a 427,m20,9in ford posi.
@stevemcelfresh85 8 күн бұрын
Was that tri fives or hot rod reunion
@toma2952 8 күн бұрын
Its badass! Cool car!
@anotherguysgarage-OG 8 күн бұрын
I grabbed this video at the Tri-Five Nationals. Car is awesome, hope to see it again this year!
@toma2952 4 ай бұрын
Very cool!
@anotherguysgarage-OG 4 ай бұрын
Mike Bilina is a wild man!
@toma2952 4 ай бұрын
Cool!
@anotherguysgarage-OG 4 ай бұрын
Yes it is!
@toma2952 4 ай бұрын
Lots of detail, great closeups and explanation of what to expect.
@anotherguysgarage-OG 4 ай бұрын
Thank you! I know its long, but hopefully you took advantage of the chapters if you didn't watch end to end. Thank you for watching!
@toma2952 4 ай бұрын
Cool! Great show!
@anotherguysgarage-OG 4 ай бұрын
Glad you enjoyed it, it was a great show!
@toma2952 4 ай бұрын
I love those movies!
@michaelachtziger3051 4 ай бұрын
Nerd
@anotherguysgarage-OG 4 ай бұрын
YEP!
@anotherguysgarage-OG 4 ай бұрын
Glad to hear! Thanks for watching!