Ian Landesman

Пікірлер

@Frankie-Bleddyn 10 күн бұрын

Ian, you haven't posted in a year. Is everything OK? I am no longer in the United States, I decided to finish my career here working for the Army. I talked to you about Torque Wrenches and now I am knee deep in them. In the past year I have calibrated and adjusted probably 500 of them from a few small inch ounce units to 1000 foot pounds, 100,000 pound crane scales, torque cells and sensors, Let me tell you, loading 375 pounds onto a 48 inch torque lever aint easy for a 64 year old, slinging 50 pound weights is a bitch. Anyway, I hope you and your family are doing well. Peace brother.

@IanLandesman 10 күн бұрын

@@Frankie-Bleddyn thanks brother! All good here. Switched jobs myself and they are keeping me too busy to fool with the videos. Glad you are doing well! Thanks for checking in.

@Frankie-Bleddyn 10 күн бұрын

@@IanLandesman Pretty much the same, changed jobs, changed continents, changed lives, I do check in but when you make that many changes, something has to give. But on the plus side, it's football season and college ball and the NFL are providing endless fun. It weird watching Saturday games on Sunday, Sunday games on Monday and so on and so forth. Big time difference between the USA and Korea. Have to use VPN to continue using streaming services. Even KZbin videos with extreme content has to be viewed with the VPN or the Koreans interrupt and make me prove I am 21, which I can't because I am a foreigner. Good times. I am glad every thing is well. Peace brother.

@NazzeerReal Ай бұрын

I saw your bike at wendyss

@ekkerhard Ай бұрын

Awesome tutorial man!

@chipmunkshavenuts 2 ай бұрын

I must be well prepared, I have the exact same ladder!

@DavidShumans 4 ай бұрын

My 67 and my 78 4 speed shovelheads don't leak oil, they mark their spots. ALOT😊

@Mike-ts3it 4 ай бұрын

I see you crimped the wires, then what?

@IanLandesman 4 ай бұрын

Put them in new connector. Some people direct solder but then must cut when have to service later. I bought a newer style connector.

@MrXYZ-uv4gj 5 ай бұрын

What direction did you put the double lip seal? With the grooves in or out? They're not actually grooves in the seal but appear to have curved lines on one side of it and a lip facing out on the other side. Thanks.

@IanLandesman 5 ай бұрын

Been too long for me to tell you 100%. I think more flat side was out? I put new one in like old one came out.

@hollybethmartin8202 8 ай бұрын

I replaced the batteries and it is trying to move but I can turn it up all the way and it barely swings. I can hear the motor working so i guess it the board inside? What do you think.

@IanLandesman 8 ай бұрын

What happens if you help it get started?

@hollybethmartin8202 7 ай бұрын

@IanLandesman it starts going slow again. Like it moves but barely. Maybe I just got a bad batch of batteries

@j.w3060 3 ай бұрын

Mine cant swing though i can hear the motor working, anyone can help please

@AlyssaBoyd-v2g 8 ай бұрын

Did you have to buy the toy part separately? I can’t figure out how to get them off of the new one.

@steverollins4690 9 ай бұрын

I still lube my belt, CRC belt dressing works for me. About every 5k miles.

@Lew1125CR 11 ай бұрын

Thank you for doing this DIY vid. I was able to get my right fork rebuilt with your help. Wish you still had the XB but that chopper is awesome.

@IanLandesman 11 ай бұрын

Glad the info helped. I miss the Buell, but I didn't ride enough to keep it in good shape. The old bike is currently in good riding shape!

@PatrickKalush Жыл бұрын

Amazing! Ive had a broken XB12SS for two years because of a fork seal. Thanks for this guide!

@Frankie-Bleddyn Жыл бұрын

If you ain't using a NIST traceable and calibrated torque wrench, then you are just guessing. I am only saying that because I calibrate for a living and just want more people pouring money into expensive torque wrenches and the calibration industry. Do I use torque wrenches on my own home cars? Nope. Hi Ian.

@IanLandesman Жыл бұрын

I think using a torque wrench with car wheels helped me understand the concept. Also f'ing up and stretching small bolts way past helped me understand. I'm sure you have a real feel for it now. I don't do it enough. I don't think I got close to the stretch point on these

@Viper6-MotoVlogger Жыл бұрын

Make sure you put some blue loctite 👍

@IanLandesman Жыл бұрын

My Buell called for blue loctite. Old school greybeards always told me to be sure to use red on sprockets just to avoid this. I'll never ride this bike far enough to wear out the sprocket though.

@hachewie Жыл бұрын

Good job

@clevelandbrowns3325 Жыл бұрын

Wow what an interesting video. I just got a 20KW Kohler unit installed 3 months ago. How are the new units compared to the unit described in this video? Is the problem still a concern? Little concerned with reliability after seeing this.

@IanLandesman Жыл бұрын

I'm still running my old one. They are very simple. Reliability is good as long as you are proactive on maintaining.

@grantsimsdds Жыл бұрын

Thank you for the detailed information. I think I can do that myself! Where do you get the rebuild kit?

@IanLandesman Жыл бұрын

I believe I bought from St. Paul Buell

@Frankie-Bleddyn Жыл бұрын

Now admit it, did you torque those down using a NIST traceable torque wrench that was appropriate for the torque value you needed? And....wazzzup Ian, I haven't been the faithful subscriber I once was. Just accepted a 3- 5 year technical deployment to Korea...so been a busy camper.

@IanLandesman Жыл бұрын

Congratulations on the deployment! This is actually the second time they loosened up and I had to retap the holes and use time-serts. Prob not enough meet to do that again. I'll know more when I take it apart.

@BayouCouyon Жыл бұрын

Hope you and the fam are well 👊

@IanLandesman Жыл бұрын

Thanks. Kids keep growing. Hope you are well too.

@Viper6-MotoVlogger Жыл бұрын

Looks like you left some bolts laying around lol

@IanLandesman Жыл бұрын

Didn't find them. Hardware store has plenty though

@AdonisRoGaming Жыл бұрын

You should repair this masterpiece, nice beauty you have there! Im back after 3 years of unactivity on your channel, i dont get any notifications.

@IanLandesman Жыл бұрын

Nice to see your name again! I should, but gonna take a breather before looking at the old spoked wheel I have. I know I'll need to respoke it which is why I replaced with the Fatboy front wheel in the first place.

@hachewie Жыл бұрын

Ahhh damn. Have fun fixing it up.

@kct9967 Жыл бұрын

This has become a yearly right of passage for me.

@IanLandesman Жыл бұрын

Wow you must put a lot of miles on it?

@kct9967 Жыл бұрын

@@IanLandesman I have an older trans without the provision for a bearing support so with the longer late shovel main shaft it tends to flex and destroy the seal faster, and I like to ride it like stole it.

@IanLandesman Жыл бұрын

@@kct9967 nice! Enjoy it to the fullest!

@adimperial Жыл бұрын

Great stuff. Should I turn off a breaker before removing the battery? Thx

@IanLandesman Жыл бұрын

I didn't. I would flip breaker for working on anything attached to the house voltage. The 12V system should be entirely standalone as doesn't mix with 120V

@1990-t1j Жыл бұрын

I got 12,000 miles out of my Ulysses belt. They should last a lot longer than that. Harley belts do.

@IanLandesman Жыл бұрын

Yes they should last close to 10x that. What was failure? Rock? Some wisdom in changing pulleys on these old bikes as corrosions and chips can wear a belt prematurely. I would rather change the belt, but that's an option for you.

@1990-t1j Жыл бұрын

@@IanLandesman Since then I have had a Free Spirits tensioner on it. Should help matters.

@IanLandesman Жыл бұрын

@@1990-t1j maybe. Some people notch the stock tensioner, but a lot of respected repair guys say leave it stock so that's what I did. I hope it works for you. Let us know!

@1990-t1j Жыл бұрын

@@IanLandesman I will.

@hachewie Жыл бұрын

My condolences to family and friends.

@balmoralpjk Жыл бұрын

DUMB👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿 👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿👎🏿

@Viper6-MotoVlogger Жыл бұрын

Nice tribute.

@ddotson111 Жыл бұрын

My buell Grey plug is triangular with 3 prongs and I can't for the life of me find the female end voltage regulator to fit..

@IanLandesman Жыл бұрын

What model do you have? there is an earlier and later style - I'm showing the early version here, but a lot of things on my particular year bike are halfway marks and even some parts are special to only this year.

@SolidFoxHoundSF Жыл бұрын

Did the O-ring spacer seal it up for good? Thinking about getting one.

@IanLandesman Жыл бұрын

I only ride it about once a month, but no puddles on the floor anymore and I keep checking the trans fluid for top up and not needing to add any like I use to.

@mattgwardesq Жыл бұрын

Anybody here familiar with which All Balls seal kit is used for 2004 xb's?

@apaixonadospormotores Жыл бұрын

HELLO BUDY, HOW ARE YOU? DO YOU AUTHORIZE ME TO USE A STRETCH OF YOUR VIDEO IN THE EDITION CURIOUS FACTS ON THE TRAFFIC? I WILL LEAVE ALL CREDITS IN THE DESCRIPTION, I THANK YOU FOR YOUR ATTENTION.

@Frankie-Bleddyn Жыл бұрын

I'm baaaaaack!!!

@edwardcarrizoza5767 Жыл бұрын

How long is the dip stick you made?

@hellfirebikerz Жыл бұрын

Sup' Rider, Hope all is well? Am I allowed to use your video for a short compilation im working hard on? You will be fully credited with watermark on the video.