Skating Green

Пікірлер

@Oh-Jeez Ай бұрын

I dont hear a difference. You probably should have put way more than you did. Gear driven motors I've seen in other applications always have way more grease than this.

@skatinggreen5621 Ай бұрын

The grease that was applied to this particular gear drive system was light if you ride right out of the box. Meepos concern for a mass amount of grease is that it will build up in empty pockets in the gear casing. That is the reason I went as light as I did as I wanted to follow more there process. I don't think you will do harm to your gear drive if you do more then they would recommend as you stated yourself alot of gear drives apply more. Every board is different and if at any point over next summer that my gear drive becomes a concern I will make an updated video.

@sheridanis 2 ай бұрын

Keen to see it

@Nashcaster 2 ай бұрын

iv had the meepo hurricane with over 7k miles. get the gear drive and don't look back. there are way more pros than cons and its a really good system. i beat the board up too. i got an extra set just incase. but the system is solid. zero issues.

@VassiliIztallinna 3 ай бұрын

No problem, take it down and bring it to me, i can wield it! 😋

@jeromep5383 3 ай бұрын

What was the distance covered?

@skatinggreen5621 3 ай бұрын

Roughly 2miles

@VassiliIztallinna 3 ай бұрын

Wery wery good Car!!! 🛹🛹🛹

@roberthudson4440 3 ай бұрын

Nice ride. Couple more days till my Renegade Diablo arrives! I'll see how it compares to my Hadean, can't wait...

@skatinggreen5621 3 ай бұрын

If my research is right the renegade is better built to ride the off-road so it should be a better ride then the Haden. If you look back to my very first videos I had a evolve gt. I'm happy to see how the company has learned and grown to what the community needs in a board.

@Steven-qm1xo 3 ай бұрын

Slick bro..👍

@johnbaldry4557 4 ай бұрын

Do you get any problems with the helix 2 bro

@skatinggreen5621 4 ай бұрын

You should check my video about the driveshaft. Other then that it's been riding wonderfully 👍

@johnbaldry4557 4 ай бұрын

I've had nothing but bad things going wrong with my helix 4 Bajaboard models are nasty cheap junk my helix keeps falling apart lol I'm glad yours is working good bro.

@johnbaldry4557 4 ай бұрын

Its a shame that we live in different countries lol

@skatinggreen5621 4 ай бұрын

Well I do put alot of work and care to mine but it has came with its issues.

@johnbaldry4557 4 ай бұрын

Your pretty good on that g4 bro

@SteveSiz 4 ай бұрын

How did you hit that speed? I was on thanes on a perfect smooth surface and screaming and only hit 35mph barely.

@skatinggreen5621 4 ай бұрын

I had some downhill helping me out. Used to go faster there on the belt drive because of less resistance. Still pretty fast though lol.

@robras2850 4 ай бұрын

Geardrive for the win I like belts but a good gear drive is a no contest especially the 2in 1 from Acedeck

@veymaxboard 4 ай бұрын

Nice works!

@FrailAsGlass 4 ай бұрын

May be the lamest shit I’ve ever seen

@princea1i3 5 ай бұрын

How about the sound, gears vs belts? Which is louder?

@skatinggreen5621 5 ай бұрын

I think Gears are the loudest. Belts are in the middle. Hub motors are the quietest.

@Derek86ixt 5 ай бұрын

Hell yea bud, I ride a floatwheel and I love it

@adudeadad 5 ай бұрын

Dude! That thing RIPS!🤙🏽

@skatinggreen5621 5 ай бұрын

It's alot to take care of but it is a blast to ride!

@mikeonabus 6 ай бұрын

Thank you

@mojoswifty360 6 ай бұрын

Biggest problem with gear drives is them getting too hot and it also makes the motor overheat.

@skatinggreen5621 6 ай бұрын

I have never had that issue with my Meepo Hurricane. There motors have heat sink covers that helps them stay cool. The gears themselves can get hot but that's were you need grease to keep the gears from overheating. If I do encounter these issues I'll have a video stating so in the future.

@arranwilliams2523 4 ай бұрын

Haven't ran into that on my nomad n1 with element gear drive yet either and I push my board hard through the whole 1035wh battery

@MFD005 6 ай бұрын

Welcome to vesc. Its awesome man. I have a xr build.

@skatinggreen5621 6 ай бұрын

Mine is also off an XR frame. I'm planning on vescing my og XR in the future so I have a street/trick vesc and a trail ripper vesc.

@alenpln 6 ай бұрын

How many miles did you put on this before it broke the first time? And the second time?

@skatinggreen5621 6 ай бұрын

The first weld break happened on my first ride. The second look some time but it seems to be the risk anytime you are putting tension on the back wheels. So far with my third one it's doing fine but it's still a worrisome weld location.

@alenpln 6 ай бұрын

How often and how much maintenance do you do on Helix and used to do on G series? Thanks

@skatinggreen5621 6 ай бұрын

So with belts it's alot less maintenance but have to clean often and risk of the belt system getting damaged. Helix is gear driven. Still figuring out how long the grease is good for but right now I'm cleaning and re applying every five rides. With that said the Helix requires much more maintenance.

@alenpln 6 ай бұрын

@@skatinggreen5621thanks! What about axle joints? My X4S is said to be serviced every 6 rides and it takes about 40 minutes to service it. And also I've never had any issues with belts there maybe due to lower spec ESC

@skatinggreen5621 6 ай бұрын

I'm guessing that's propel x4s? Baja and propel have different frame builds. Bajaboards belt system design made the system vulnerable to dirt and debris. You mean maintenance on axel joints?

@alenpln 6 ай бұрын

@@skatinggreen5621 yes, did you ever need to regrease them on G4? How many miles you did on it for the whole lifetime of the board?

@skatinggreen5621 6 ай бұрын

@alenpln When it was the belts I only re greesed once or twice a year. With the gears since you have to re grease the system every 5 rides I usually just regressed everything.

@princea1i3 6 ай бұрын

Thanks for making this video. Been searching for this exact comparison

@skatinggreen5621 6 ай бұрын

Happy to help 👍

@eBoard3R 6 ай бұрын

🤙🏽⚡️🤟🏽⚡️🤙🏽

@StorySteven 7 ай бұрын

Gonna be a pro someday

@IsraelAngle 7 ай бұрын

Hellyea

@TheGunsNBlades 8 ай бұрын

Yea…this right here! Is 45yrs too old to get in, lol. I need to research these boards but if i could utilize your knowledge and given all that you have learned in your journey and blew coin over, what board would you recommend for a coordinate dude that weighs 250lbs and wants to shred the trails at the Bird, Neversink, Mt. Penn & Blue Marsh??? Thanks in advance. Been a pleasure watching your vids, had no idea these existed.