I have seen a few videos on these and from what i seen it best to keep your money even with the glue dent pullers..
@GSPDUKE5 күн бұрын
Thanks for the great tips and evaluation of products. I have an easy bump compared to yours. I am leaning towards Harbor Freight and getting the needed arsenal. If none of it works, then it stays where it is.
@mikeslechta66077 күн бұрын
What a job. You’re lucky
@shotbyinspektr73689 күн бұрын
Nice
@charles-fq2dw15 күн бұрын
very quick upshifts but slow downshifts compared to a dct
@electedelite221016 күн бұрын
Yeah, foot did like 99 percent of the work.
@MrPunch0917 күн бұрын
Took me about 3hrs with the wheel attached, a couple of places were difficult to see the back side and I was too stubborn to turn the car on and simply turn the wheel as needed. However if you are thinking about doing this I do recommend it, but also don't be stubborn turn the car on and turn the wheel as needed.
@stephanyburgess63318 күн бұрын
Just use boiling hot water then suction it you could even use a toilet plunger if you have to
@briangray761422 күн бұрын
Nice tutorial.
@garrettluluquisin566622 күн бұрын
Softer bars in the front/stiffer bars in the front are always the ideal setup in FWD or more specifically transversely-mounted front-engine cars. Since the engine is mounted much more ahead of the front axle compared to a mid-engined car it’ll need more coersion to rotate the rear.
@doncorleon925 күн бұрын
Whiplash!
@Simple5.027 күн бұрын
My wheels are so friggin heavy.
@patrickbrady51927 күн бұрын
That's the PITS
@Superstar-nl5tl28 күн бұрын
I don't want to do this, can you come kick mine out for me? pretty much the same spot
@c.d.897528 күн бұрын
Ryan preece sucks 👌
@anecd0talgamer990Ай бұрын
GEt cho ass out that trunk 😭
@jacksampson7711Ай бұрын
These covers are hit or miss. I installed 2 on an BMW 435i that came out pretty well. Ordered 1 for my BMW M340i and it did not fit at all. Contacted the vendor and they were no help. Beware.
@lilblackfish2009Ай бұрын
thx iam 6'2 as well and this is one big reason why i want a prius cuz i want to camp in it and not spend on hotels when iam traveling i like it , i was worried as a big guy
@said9970Ай бұрын
good job, what is the name of that puller tool and from where can i buy it? ty
@dickraw7442Ай бұрын
If you've never heard one of these in person, you must try it once ! The Earth vibrates ❤❤the grand stands shake. Your eyes will burn like they've never burned before.
@GEN-X-Ай бұрын
Toyota drag cars should have to use a Toyota engine.
@zackpagan590Ай бұрын
Does it affect the fueling?
@IqtidarАй бұрын
You can buy the Microswitch harness and the Stainless Steel Paddle Gear kit from EVANNEX in the US for just $20 - $106.
@hypershrimp_Ай бұрын
How is this channel so underrated???
@SymRuXАй бұрын
How tall are you, Bozi?
@BoziTatarevic1Ай бұрын
6’2”.
@SymRuXАй бұрын
@@BoziTatarevic1 thanks! Would a 6-4 guy be able to drive the Prius comfortably?
@ChiefJoey5971Ай бұрын
It's always fun
@Sharow98Ай бұрын
You helped immensely!! 🙏
@dar322skАй бұрын
very informative. Thank You!
@Freddy_ConfettiАй бұрын
Looks like a Porsche but better
@ornatehammer661Ай бұрын
Does it have headroom while driving for a 6'5" person?
@BoziTatarevic1Ай бұрын
I would say that 6’4” is probably the limit.
@ornatehammer661Ай бұрын
@@BoziTatarevic1 thanks!
@ZeeButsogАй бұрын
Just push it out from the inside 😜
@hiusrtmaАй бұрын
Thanks Bozi, exactly the instructions I needed!
@stephenhall35152 ай бұрын
EXCELLENT.
@willy80462 ай бұрын
👌👍🏼
@user-Dr.2 ай бұрын
Not near enough HP, ever go to a go kart track that they all go exactly 7mph?
@satoshiserena48432 ай бұрын
I believe the rear diffuser is the main issue. It doesn’t work well at short tracks because the cars don’t go fast enough for it to be effective.
@TJ75z2 ай бұрын
Is it possible that the main issue is the ride height and platform control requirements? Xfinity and Trucks both have minimum ride height rules, which had been abandoned in the Cup Series in 2014. Gen 4 had coil-binding, then the COT introduced bumpstops; both implemented by teams to control the platform. With no ride height rules, the cars move less due to the bump stops and high rebound shocks, introduced in the Gen 6 era and exaggerated in the Next Gen era. Assuming NASCAR implements a ride height rule, with restrictions on the bump stops and outlawing coil-binding (max number of coils), an emphasis will be placed on the mechanical platform rather than the areo platform. It seems at least to be an easy item to test with limited cost to teams and partners
@BoziTatarevic12 ай бұрын
They've tested at much higher ride heights and it often ended up worse than what is currently in the rules.
@WastelandBowman2 ай бұрын
Good information. Thank you.
@hacksawjimthuggin74112 ай бұрын
Bristol and Richmond have proved its the tire. The current slick is too big. Add that to low HP and brakes thst are too big this is what you get.
@nomadman52882 ай бұрын
It's partially the tire not wearing how it needs to, but there are definitely other factors.
@wrongwayfeldman32472 ай бұрын
The thing that makes me think this is mostly not an aero issue is they tried testing with no diffuser at Richmond last year I think and the drivers said there was little difference. I think it's part HP, part wider tires, part new suspension, and part aero. I have no idea how they'll get back the short track racing we had before with this car.
@doitfordale70682 ай бұрын
Aero-wise, there wasn't too much of a difference. However, drivers commented that they could yaw the car out more without the diffuser.
@RavensVFX2 ай бұрын
Tip for removing the glue: Use the isopropyl acohol 80% to get it off easy
@colekleis49522 ай бұрын
Awesome video! Great job editing too, top notch quality 👌
@AlanisKing2 ай бұрын
I always love your shots of the car getting pulled around
@BoziTatarevic12 ай бұрын
Nate is always a good sport when he sees me pull out the phone because he flashes the lights for added effect.
@jaredfaidley83912 ай бұрын
Hell yeah you guys won Sebring.
@JosephMbidi2 ай бұрын
Where did you buy the equipment? And what is the name of equipment? Please reply
@jackhill4362 ай бұрын
A deflated basketball works great just use a hand pump to air it back up slowly or just do like most body shops and put about 3” of body filler then charge $5000 for the repair
@christyinthecarolinas2 ай бұрын
A little animal fat aka lard or tallow would help give the plunger more suction
@user-fx9ym9cl5v2 ай бұрын
Lay down in trunk on your back and kick it out, you look stout enough😂
@AlanisKing2 ай бұрын
GO TEAM
@davidhunternyc12 ай бұрын
That's supercool. If you can get used to wearing an eye mask, you can even sleep in. Now what about your morning coffee?