Expand pliers is the proper name of that tool?

3:45 that 365 degree circle ... the extra 5 degrees could really come in useful if I can find which part of the circle it resides.

LMAO ... de beard...!!

I am doing an6 45s and 90s. I notice that the fitting swivels on both . Can you explain how this wont leak

Would you use Tin coated Copper cable .?

Nice job in explaining your work and tool usage. 😎

Crazy loud music was way too much

Dude you suck at making videos, this wouldn’t help anyone who needed help.

8:33 The nub on the back of the swagelok bender behind the tube latch is called a vise clamp bock. So it will essentially do the same thing as that bench mounted bender.

alTk

Where is the best plae to buy/order the stainless steel tubing?

Great information, I'm planning to start 3D printing car parts to sell online! Worked around cars a long time and have a huge bag full of parts I want to make, the hardest part now is mastering fusion 360 lol

Wish wish you came back to cars

I've always butt welded, lap welding just always seems not right to me intuitively

is 3/8 line proper for -6 and -4?

Thx, very informative.

Why in the hell do you need to tell us that your die grinder is a sunnex? Why can't you idiots just post a video that shows exactly what you've titled the video? I don't understand why it's so hard for you people to have common sense and just stop rambling on and going in circles. Can anyone explain this to me or are you going to try to explain it to me going in circles and tell me about why the grass is green and why? Why why why why all the yys

The real concept behind the dead blow hammer is that it won't bounce unlike plain hammers. This means that it does not leave a secondary minor mar in the surface from the hammer bounce. The hit stays in one place only! Precision hits are the dead blow hammer's strength.

Cheers man,.

You are great at this! Thank you very much!

inspired

This kind of space is so amazing I will make one of these in the future to create with my community further!

Eastwood Hammer r lot better

What model Boss Laser?tia

for those extra bolt holes put a countersunk screw head in them and lay some masking tape over it and you're good.

Can 87 also be the switched power source or do I have to add an additional toggle switch to be at the close circuit 86?

I just saw this car at another link. I sure didn’t know that had been around this long.

The Torque test channel on KZbin tested them by ripping them out of cast iron. You might be surprised by the results.

Still broken I hope it’s the ignition module

What if it's a blind hole and the insert is loose with broken thread?, please tell me how to remove it

Is this dude still around? It seems like any from 3 years ago onwards don’t get a response, but he was very active answering questions before that.

How does that bulkhead secure to the firewall

I don’t understand EV hate. You press the skinny pedal to the carpet of my Model 3 Performance or my Model S and I giggle the same as launching my 300zx twin turbo and my C6 vette. The EV drive isn’t supposed to be better, it’s supposed to be different. If someone can’t grin when behind the wheel of something in the twisties, that’s not the fault of the drivetrain…that sounds like the problem exists between the steering wheel and seat. Hopefully you will revive this series and thank you for the detail of this. Carving time for this out of SEMA had to be difficult and you are appreciated

Literally all I want to know "How good is the mic" and not a single review even covers it at all. Do you people never make phonecalles?

Just a question on jointing wire to wire that has been cut . The wire that is cut is .5 mm. To reconnect the two pieces of that wire I need to put in a short piece in order to get the length . Should that insert piece be the same thickness or more ...tks

Abraham Shrinkoln

Soooo, I have an LS 706 head that I thought was ok (on first glance). I did notice a broken exhaust bolt which did not bother me. I have removed these before without issue. I didn't notice a cross threaded spark plug AND I really didn't notice that the 4 center exhaust manifold bolt holes were completely stripped out. I had fixed a spark plug hole before and that worked out just fine. What to do about the other 4? Luckily, I found your video! I bit the bullet and purchased the kit you used. At first, I was weary because the kit is not cheap. Worked perfectly! Worth every penny! It's a small thing, but when you can repair something yourself without having to go to the trouble and expense of paying someone else, it is very gratifying. Thank you for your video. I have gained new confidence in an area I previously found to be very intimidating.

Men you are the best. At least to what I need.

I have a ranch truck and been having some leaks. Hose and clamp arent holding up on the rough roads, so looking into AN and wow. So much to learn

I've got a VW beetle I want to run an isolated switched auxiliary fuse box up under the bonnet for accessories. But the distance from the battery to the fuse box itself is about 10- 12 feet... I've got no clue on what gauge wire I need to feed this thing. All the accessories will be fused as well. Do I need the fuse box to be fused to handle the total potential power draw? For example - the lightbar I'm looking at comes with a 30 amp fuse, and so does the radio - so there are 60 amps already. I couldn't just use a 30 amp fuse to protect the fuse block if the draw from the block is going to be more, could I? Seems like I'd need to add up the potential draw and protect against that? What's your take? I appreciate any guidance or additional videos I should check out

ANybody knows where to get good hardline suppliers in Europe ?

My waste gate is really close on the heater core fittings this will help me to install some 90 degree fittings also is it possible for the fitting to hit the thermostat??

This is what MIG pliers are for

I have 12v 40a and it is safe to use 5mm I think is 8awg cable from battery to relay then use 22awg cable from relay to reverse camera ?

Same here bro , trying to find an a/c on ring flaring kit for days till I saw these video and gave up on it lol , seems to be some kind of license requirement for that, thanks for the info and I'm not gonna say your lines are beautiful because you already know it. 🍻

What to do if your hose spins when tightening ?

Thx,very helpful video

What ac compressor braket is that bud?...putting a 5.3 in my 97 silverado...and want to keep the same ac system as its still new lol...thank you for info also lol...great vids..🤙 got my Sub

What about AN compression fittings for hardlines?

Not going to lie, I bought it just because it's made in🇺🇸 and says Snap On. I actually like the Snap On gearless ratchets in 1/4" and 3/8". I'm always going to support 🇺🇸 manufacturing. Only buy 🇺🇸 made tools. Every dime needs to go to our manufacturing.