Minwax has discontinued antique oil. I’ve been using it for 30 years and now have to find a substitute. Any recommendations?
@dman38Күн бұрын
Instead of ripping the 2x4's in half, can't you just use 2x2's?
@TheBeardedBrit.2 күн бұрын
Ffs how ridiculous😂😂 Pump sprayer and SH would have that off in 15 minutes… don’t listen to this clown!
@Fateful_Zac_Offical2 күн бұрын
It didn't work
@TheHappyHootie2 күн бұрын
Sorry. It did for us as shown.
@MrBowwow12 күн бұрын
Where is part 2 i want to know how it did and if it lasted
@TheHappyHootie2 күн бұрын
Parts 2 and 3 are both on the channel. Works great. Better after we built the air dam to prevent the air from recirculating… but works well under drive and parked
@Avi130313 күн бұрын
Wt if it is deep
@TheHappyHootie2 күн бұрын
Soak in water or hydrogen peroxide solution first.
@Avi130312 күн бұрын
@@TheHappyHootie got it removed thanks ❤️❤️❤️
@chelseaamburgey-bo2oe3 күн бұрын
can I use it to get them out bc my new 2nd piercing is stuck and I need to clean them
@liamali28923 күн бұрын
U made me tangle this slinky
@bsraeder4 күн бұрын
How is the product holding up that you used now?
@TheHappyHootie3 күн бұрын
Still working well. A few edges have separated, but it’s still flexible. Might shoot a little more in the crack this summer. All in all it’s still holding up well. For the cost I would do again.
@TheHappyHootie3 күн бұрын
Still holding up well. For the cost I would do again.
@tedfudjinski96214 күн бұрын
Do not like the product or applicator, luckily if it reaches 15 feet not 30!
@FantomMisfit4 күн бұрын
Where I'm from anything can be done as long as you're willing to do a little jury rigging 😂
@ROOKTABULA5 күн бұрын
You said you only got a few years on your table with this? I've been researching this and what I've saw and read its seems to be what I'm going with buy a few guys said they get a decade or more out of an application. Maybe your table gets a lot of traffic? I'm restoring a huge table.
@toymac95 күн бұрын
This comment section is weird, haha. Why don't y'all just make one and test the results yourself? This person is just showing you a "how to". They aren't solving all of your problems for you! Either way, thanks for the tip. I think I'll try it out and see if it works for me. Crazy, i know!
@TheHappyHootie4 күн бұрын
Everyone is a critic. :-)
@collinblake99575 күн бұрын
I thought the Spartan devices also had borax as well?
@jimmypall45316 күн бұрын
The corners and straights go together to form a perfect corner. That’s the reason for the straight and beveled edges in the same row.
@johnnywonka12116 күн бұрын
take time for yourself , you deserve it.....
@questianna6 күн бұрын
2:00 Yeah, you didn't try wiping the mold/mildew before application. Mold/mildew can be wiped off a shower curtain. The spray is not what took that off. This review is utterly ridiculous. ANY cleaner will improve a dirty tub/shower. The purpose of this product is to test its claim of "no scrubbing," and no wiping. It is supposed to be a spray, wait, and rinse product. Your test of this product is flawed because you wiped. Then, you give a positive review. Rubbish!
@Jessica-ul6me6 күн бұрын
I went and bailed out 3ft of swamp water from a summer waves pool and took it home for free but no filter included. Hopefully, I can find one of these for cheap to hook up to it! Thanks for the video!
@OlenaKyrylenko7 күн бұрын
Do you happen to habe a list of tools and fittings? Thank you!
@ray.a73437 күн бұрын
Fork won't fit hooks u gotta use wire😢
@tims.4677 күн бұрын
No one shows how to remove the inside cover rear screw tab covers at 0:45. Looks like you have to use a pick or push a narrow blade screwdriver in around the edge and pry them out.
@jamesc99757 күн бұрын
The listing does not list the nozzle size, they have to be matched to the machine. your machine would either need 1.25 to 1.5 gpm nozzles. A 15 degree will clean better than a 25 but both work just as well. If yours has 2gpm nozzles its better on new concrete with the lower pressure. My machine is rated for 5gpm it takes a 5.5 gpm turbo nozzle so I need either 2.75 or 3 gpm nozzles for a surface cleaner..
@zakhall17787 күн бұрын
My slinky is absolutely destroyed now. 100% unusable.😂 This did not work for me
@156aliciasy8 күн бұрын
Thank you Gerry this is exactly what I was looking for!
@christhompson20069 күн бұрын
I've tried that product before with very poor results. Waste of money.
@mukherjiradhika859 күн бұрын
Enjoyed and lovef the video to bits Thanks a bunch 🌹
@rahulsonawane7619 күн бұрын
Is it still working properly after an year for you? There are reviews mentioning rusting on motor or battery drain after 3 to 6 months of usage? Pls guide...
@Fred6320511 күн бұрын
How long did you let it dry between?
@CesarGonzalez-lb7wi11 күн бұрын
Why did u install the outlet for the plug in to hang ip side down?
@dnyaksic11 күн бұрын
I wanted to say thank you for the tip.
@EitanShemy11 күн бұрын
That's a win but also an annoying voice
@IBallard13 күн бұрын
Yup
@riverflynn489614 күн бұрын
I think I’d put more faith in this video if they could spell disappointed properly…
@volleyballDave15 күн бұрын
the title says you're going to show us how to install it. But you don't show us and dont provide any link to anything else that might... fail.
@douglas165453d15 күн бұрын
Nice👍
@caelanharamis566015 күн бұрын
It makes me laugh that the title is "fix a stretched metal slinky" and then you're like "is it fixed? debatable."
@AntIsPanda16 күн бұрын
I’m reporting and disliking you
@TheHappyHootie16 күн бұрын
I’m sorry you feel that way. We have helped hundreds of slinky owners and sorry we could not help you.
@marvellstarks243416 күн бұрын
You gotta be kidding me
@angelamaxwell5917 күн бұрын
Why do you have to wait so long to rinse and wipe?
@CARWASHCHANNEL.17 күн бұрын
You do it agin with one more wash and then the state will be gone ash very gone
@JohnAbrahamCA18 күн бұрын
Cutting the copper should be in the opposite direction with the pipe cutter
@TheHappyHootie18 күн бұрын
Good to know!
@Arandomwoman21 күн бұрын
Is the pan vintage? Thank you for the video.
@TheHappyHootie20 күн бұрын
No… just dirty. Glass top stoves seem to get them dirtier than the old coil ones. Everything that is on the surface burns to the pan
@teambrony27722 күн бұрын
I love you. Because everybody else will drag it out your straight to the point.
@TheHappyHootie21 күн бұрын
It’s what we do :-).
@philhurren116922 күн бұрын
Rommel , the very best bartender ever ! ❤❤
@TheHappyHootie21 күн бұрын
Spoken from someone with experience! And agreed!
@frankie.d112722 күн бұрын
What do you think average cost is to have electrician run a 50 amp/220 line of approx 50-75 ft ??
@TheHappyHootie22 күн бұрын
Unsure, as it depends on where you live, cost of labor, materials etc… if the line is like ours and exposed , vs buried in a wall. I found this online Running a new electrical line costs $7 to $10 per linear foot for the wire and labor to connect a 220V outlet to a circuit on the main electrical panel. Apr 5, 2023
@frankie.d112722 күн бұрын
Ok thanks so much for the info!! Debating installing a hard wired level 2 system vs just running 220 outlet- most likely getting an s60 recharge, but in case I go full electric in future, wanna make best choice. Thank you! 👍🏼
@louellenhackel931023 күн бұрын
Do you have a video on how to smooth the fiber board under the front edge of the counter top? Mine has gotten damp from the dishwasher releasing steam.
@TheHappyHootie22 күн бұрын
If it is just rough under the edge, I wouldn’t see why you couldn’t just sand it down a little . If the fiber board is swollen up and has expanded, or separated from the laminate, it will be harder to fix
@louellenhackel931022 күн бұрын
@@TheHappyHootie Thank you for your response. Thankfully, it has not separated. I will try sanding it gently to see if that smooths it out. Thank you again !
@andrewdenny782724 күн бұрын
Hopefully hit no pipes or cables
@TheHappyHootie22 күн бұрын
Nah. It is a crawl space and we checked it out prior!
@QuavoEnt24 күн бұрын
That’s smart it worked like a charm thanks
@TheHappyHootie22 күн бұрын
Yay 😃
@BigJDinSC25 күн бұрын
Very helpful. Thank you.
@TheHappyHootie22 күн бұрын
You are welcome
@casid992926 күн бұрын
Where does this happen? I live in Colorado and can't imagine siding molds like that.
@TheHappyHootie26 күн бұрын
Here in the midwest where humidity is high. Pretty much everywhere that isn't extremely dry or cold
@casid992926 күн бұрын
@TheHappyHootie Thank you for reply!
@mystica-subs7 күн бұрын
@@TheHappyHootie (another Coloradan here) and Colorado is both dry AND cold!
@joboo6517 күн бұрын
Willamette valley in Oregon on north side of the house. We get quite a bit of rain here.