Hi! We have a snowman available on our site! Here's the link!! pipsupply.com/products/let-it-snow-faux-leather-diy-hair-bows-craft-cutouts-pips-exclusive?variant=43495852015810

Hi! Here's our full length video if you need help tying! kzbin.info/www/bejne/poq3i4CEicpmo8k

I would think so! Maybe use the glossy version!! :)

Hi! If you'd like, there's a playback speed button on the video that'll adjust the speed for you. Here's the written directions in case you can't slow it down!! :) Take the glass (or plastic) ornament and coat the inside with "glitter it" glitter glue. While it's wet, add fine glitter and coat the entire inside with the glitter. Once that layer dries, you can add anything you want. We added snowflakes. Then put on the ornament topper and add a ribbon and you're done! Super easy!

Hi! Here's our longer tutorial on how to tie the bows. Since these are new, they aren't in this video but they tie the same as our XL Isabelles!! kzbin.info/www/bejne/nZ_SdI2fqtylfrM

It’s called glitter it.

Hi! Yes it can! We've seen some of our customers sew it on! :)

Hi! Here's the link! pipsupply.com/products/flowy-sailor-diy-hair-bows-printable-template

Hi! This is a template! Here's the link! pipsupply.com/products/easter-sweet-treats-shapes-bubble-neoprene-hair-bows-diy-pips-exclusive?_pos=4&_psq=easter&_ss=e&_v=1.0&variant=43881966239938

Hi! We unfortunately don't offer the UVDTF wraps on our site anymore, but lots of small businesses sell them on Etsy! Most of the time in their descriptions it'll tell you what size/style cups fit each sticker decal. We typically got our cups from Amazon and they're called Libby Cups. Hope this helps!! :)

Hi! We like to make sure the surface is flat and clean. Slowly put on the decal starting in the middle and flatten out towards the edges. For any bubbles we take something flat like a card/giftcard to smooth out any bubbles. :)

Hi! We recommend the 2.375" clips!! :)

Hi! We recommend the 2.375"!! :)

Hi! Our base headbands are velvet! :) Here's the link! pipsupply.com/products/velvet-headbands-solid

No this does not go in the oven.

Hi! These resins cure hard! There is no flexibility to them once they've cured!! :)

Hi! So sorry about that! Here's the new link!! pipsupply.com/products/rectangle-clip-cover-template-cut-file-svg-download

@@PIPSupplyCo How do I know the size of your current mold the SVG is designed for? I want to ensure it matches up with my mold size. Thank you.

@@whitneymabee4969 Hi! We no longer sell our molds anymore and they haven't been offered for a while, so we no longer have the measurements. I'm so sorry, but if it helps, the clips they fit are 2 3/8"

Hi! All our cutouts are available here!! :) pipsupply.com/collections/faux-leather-templates?page=1

Hi! Nope! You can definitely hand cut these! :)

Hi! Yes, we like the Lynn Lilly Surebonder gun and glue. www.amazon.com/dp/B0CV4XJB6L?linkCode=ssc&tag=onamzprettinp-20&creativeASIN=B0CV4XJB6L&asc_item-id=amzn1.ideas.13YIX2Q02VLLF&ref_=aip_sf_list_spv_ons_mixed_d_asin&th=1 The Gorilla glue one works good as well!! www.amazon.com/dp/B07K791YRP?linkCode=ssc&tag=onamzprettinp-20&creativeASIN=B07K791YRP&asc_item-id=amzn1.ideas.13YIX2Q02VLLF&ref_=aip_sf_list_spv_ons_mixed_d_asin

Hi! These bows are sewn! If you wanted to add a dot of hot glue in the center after tying to keep it from untying, you can but it's not necessary!! Here's the hot glue we recommend!! :) www.amazon.com/dp/B0CV4XJB6L?linkCode=ssc&tag=onamzprettinp-20&creativeASIN=B0CV4XJB6L&asc_item-id=amzn1.ideas.13YIX2Q02VLLF&ref_=aip_sf_list_spv_ons_mixed_d_asin&th=1

Hi! We typically use the little hair tie elastics. I'll link some for you! We also typically like to use a Loctite or Super Glue for this part, in the video we showed hot glue since it was all we had on hand at the time. The glue shouldn't be applied directly to the rubber band, it should be applied on top of the other end of the center. We start showing the center section of the tutorial at 9 mins 44 secs to help you see it better!! Hope this helps! :) www.amazon.com/dp/B0791BYJWG?linkCode=ssc&tag=onamzprettinp-20&creativeASIN=B0791BYJWG&asc_item-id=amzn1.ideas.3ROPX7ESHSDW9&ref_=aip_sf_list_spv_ofs_list_d_asin www.amazon.com/dp/B00ELV2D0Y?linkCode=ssc&tag=onamzprettinp-20&creativeASIN=B00ELV2D0Y&asc_item-id=amzn1.ideas.13YIX2Q02VLLF&ref_=aip_sf_list_spv_ons_mixed_d_asin

Hi! We haven't heard of this before!! If it's really dirty maybe try goo gone? The material can be prone to getting dirty anyway just based on the clear plastic alone. Sorry I don't have any other answers :(

Hi! Do you need the pinwheel or the shorter ones? We post all of our tutorials on our Instagram pipsupply if you don't see what you need here!! :)

@@PIPSupplyCo it is a long piece with a tiny piece for the middle trying to figure out how it goes to make them for grand kids to where to school I don't do Instagram

@@carmengreen4134 kzbin.info4yhqd76VHtM Here you go! Let us know if you need any more help!! :)

@@PIPSupplyCo yay awesome you're the best thanks for your time and that was the one I was looking for once again thanks so much

@@carmengreen4134 No problem!! Have a good day!! :)

Hi! It's really just based off your preference! Since that part goes behind the ears, we typically leave it as is, but you can glue it if you'd like!! :)

2. After checkout, WITHOUT OPENING THE FILE, save as a PNG file to your computer 3. Once saved, WITHOUT OPENIG THE FILE, right click on PNG file and print as a full page photo 4. When printed it should measure approximately 5.25" x 10"

@@PIPSupplyCo is there any other way to print it correctly? I'm trying to do it with my Macbook, and there is no way for me to download it, or print it, without opening it first.

@@GabrielaGussenhoven Hi! I'm not sure why it wouldn't be printing correctly. If you hit "download now", it should automatically download to you computer files as a PNG. Then, from your files, right click and print. I just tested it on our end and it seems to be working! If doing those steps again doesn't help, please email [email protected] and we can get it figured out for you there!! :)

Hi! All of our UVDTFs are just the decal so they stick onto any hard surface! No heat required! Our sublimations are labeled as such on our site so there's no confusion as to which is which!! Here's the link to the UVDTFs!! :) pipsupply.com/collections/uv-dtf-permanant-adhesive-decal

Hi! Our Liverpool strips are 5 inches tall and a 5 month old would need 13.5" long approximately. It all depends on the size of their head! If you'd like to try a different sizes, we have all measurements from 0-adult listed in the description below the video!! Let us know if you have any questions!! :)

Hi! Our UVDTFs work well with any hard surface!! :) pipsupply.com/collections/uv-dtf-permanant-adhesive-decal

Hi! You can use this link to shop all of our neoprene bow templates! The one in this video is called "Christmas HO HO HO Pinch Neoprene Bows"!! pipsupply.com/collections/fabric-templates

Hi! We sell both 8.5x11.5 sheets and 8.5x23 inch rolls in our regular patterned sheets, but our cutout template is one size. If you would like something in particular bigger, please feel free to email [email protected] and we can see what we can do!! :)

@@PIPSupplyCo love this, thank you!

Hello! The size of the fabric before sewing is 16" long and 4" wide. The fabric is available in any of the patterns on our site under "Unfinished Ruth". Here's the link! :) pipsupply.com/collections/hair-bows-bow-strips

I want to order

Hello! Our website to order is pipsupply.com/ If you need additional assistance please email [email protected] :)