Use OEM sensor or you'll probably be doing this same work again in 2 years or less.

That little hose to the left of your hand at 1:16 needs to have hose clamps on it or it will pop off and cause a massive vacuum leak. Ask me how I know.

God bless you for this most helpful video sir

👍 thanks i am the restroom hijo please sleep good night.

Man your using some crazy stuff to get that adhesive off

I fought getting the cover back on for several hours. Was ready to give up and as a last ditch effort I got the two left side screws in, then I pulled the cover at the right bottom and pushed it in. Lined up the holes immediately. You can't just push it from the top because the lip of the cover catches at the bottom. Pull it out, slide it over, easy.

My panel lights are dimming and flickering and the key sometimes wont turn the ignition…. All dash warning lights come on and sometimes I have to turn the key 10 times before it finally starts and sometimes the instrument panel lights come on and then they start flickering and go dim please help! I also have a left blinker rear light occasionally going out, but I don’t see why that would be part of the problem, but it seems to coincide with the other issues

Hey Tony I have I a question, so I have a D21 1994 as well though there is a problem with the steering wheel, I have tried to put the horn cover back on the steering wheel though it seems to not fit, but it is its original one, can you help me out?

Does an eighth valve Chevrolet Kalos 2005 have a camshaft position sensor at that place too?

👍

Thank you sir!

why did u not just drill out the hole

Mark was the back bone for Alabama

Nice video love Alabama

I could watch your videos all day my friend. I am a young senior citizen and it seems like you’re getting up that age. I’m not very good at working on cars and just bought a 2007 Toyota Prius two weeks ago. I want to get better at working on cars starting with the Prius. Your videos are really helping me.

Sir I am Pam and I worked at the zoo and I lived there. My father was the manager over the park. The cows that feed the lions that you mentioned, they were not stolen. The local cow farms would bring the dead cows to the park only if they were hit by lightning or died of natural causes. We would not feed the lions with a cow that was sickly. I hope you enjoyed the area and the beautiful views around the canyon. God bless you

Got a p034 Cam position sensor code. and car stalled out on the freeway. When I went to change it the Timing Belt had Snapped. so just because its that code doesn't mean its exactly that issue. Whenever its a sensor I TRY to remember to look at everything Leading up to that sensor. Ive had vacuum leaks through major sensor codes, But some duct tape fixed it to get it to the store for a $5 dollar hose instead of a way more expensive sensor.

How did they “dirtbag” you? You just said you didn’t do your research BEFORE purchasing and trying to install one. If anything you dirtbagged them

Awesome

It helped, thanks!

that sure was a lot of liquid in the back to cylinders, did you find the reason for it? I think I'll take a look at #3 plug that is mis-firing to see if I have oil in the area. Thanks much

Thank you.

Oh jeez, this is way more involved than I thought it would be.

Do you have a video on how you cleaned up your engine bay? Looks stellar?

Why don't people use Plastic box banding and Seesaw it behind The album

Can you het rid of the plastic clips?

By-passing a fusible link is never a good idea :( Especially when you can do it correctly at a much lesser expense.

You repeated yourself so many times

From 2 to 6 is 4 hours mister, not 5.

Toyota!

Cheers for that. This worked for my Holden Barina tk 2009

Good video. I'm glad the engine you are working on looks exactly my 2010 Ford Ranger 2.3L. I'm confident that I can now change the spark plugs with no problem. I also like that magnetic spark plug wrench. Now I will check out your channel to see if you have changed the fuel injectors on your Ford Ranger. On mine it looks like a real headache. Thanks for your helpful demonstration.

thanks Tyger K!

😢😢😢😢😢

Well that certainly was needed. I have a 1990 2w hard body that seems to keep on running. Thanks for the video.

Thanks for the information. It does look easy

For the love of all that is holy, get a phone gimbal. Hahaha. But, seriously, thanks for posting this.

I'd like to see you do a video on how to tie your shoes. Both of them.

Thanks for posting this. I just did this job. Worst part is that the sensor bolts are really tight and it's hard to get a direct line to the bottom bolt due to the engine mount being in the way. I ended up using a deep 10mm socket on a long extension and was able to get enough of a bite on it to break it loose. Everything else is straight forward and it took care of my surging idle issue.

You grave robbers

Fine job. Looks like Mark is back to enjoying playing music. Sadly, the business end can destroy every reason as to why you loved performing in the first place.

You don’t have to do that. You can remove the whole gear thing from the cluster. It’s held by to clips it’s easy to remove.

LAST WILL BE FIRST FIRST WILL BE LAST..

I guess instead of buying me a trap, Ima buy myself some apple cider vinegar chips and sprinkle it around my garden!

Helpfull! Thank you.

Amazing video dude love the work and narrative.

Great video. I followed your instructions. I need a wrench for that bolt that's hard to reach behind the fan. Tomorrow's another day. Thanks for the help.

Lazy

Hello I enjoyed the video where you replaced the bottom window rubber. Can you please tell me the wedsite where you got them. I also have Nissan D21 and I want to replace mine

No throttle or TPS relearn ?