21 күн бұрын
Пікірлер
@zakligon7682 13 сағат бұрын
Can this fit into an esg grip?
@supaairsoft 13 сағат бұрын
@@zakligon7682 I’m not sure, never had my hands on one of those before to test fit this into. Towards the end of the video I do have a few clips comparing it side by side to the Polarstar FCU, hopefully that helps.
@BatangTaba23 10 сағат бұрын
It look like it going to be a tight fit!
@MoodiOG 14 сағат бұрын
Hi, I have used your go pro settings but my video quality is still terrible but I know you mentioned post edits. What post edits are these and what do you use to edit?
@supaairsoft 13 сағат бұрын
@@MoodiOG by terrible what do you mean? If you’re using a flat color profile you want to make sure you’re color grading based off your footage in some video editing software like premiere pro. These settings are optimal for indoor play, which is why I suggested ND filters as an optional accessory for outdoors play with these settings. If you don’t have ND filters and you have the shutter locked in like I show in the video and play outside, the footage will be way too blown out with light. Hopefully this helps!
@Zfickoff Күн бұрын
Yea im fuckin doing it.
@supaairsoft Күн бұрын
@@Zfickoff exciting! What’s the build gonna look like!
@drewmurray6480 3 күн бұрын
T238 fcu is basically exactly the same as the gorilla fcu just a shit load cheaper
@supaairsoft 3 күн бұрын
@@drewmurray6480 I wouldn’t say exactly the same, but it is similar! I have a review video coming out in a few days!
@drewmurray6480 3 күн бұрын
@supaairsoft yeah that's why i chucked in the basically but yeah i got told off a tech who runs one of the gel ball shops over here to get a t238 fcu for my polarstar F2, pretty sure he runs the gorilla fcu with his wolverine set-up but was like save yourself a few dollars and go the t238 route cause they are basically the same thing, still haven't tried it out yet and want to pull the F2 out of my aps noveske and replace with the spare polarstar jack i got and i brought a black retroarms receiver ar15 and the f2 is going in that with the T238 trigger board and the T238 238 fcu and some red receiver furniture and a black and red strike industries pit viper stock to match the black and red build and can't wait for the video someone else mentioned that's they are surprised that you don't have more content out considering your bloody awesome style and quality of editing but you are just getting going i guess anyways keep up the quality work and catch you on the next one
@supaairsoft 2 күн бұрын
@ Thanks a ton man! I’m trying my best hahaha
@drewmurray6480 3 күн бұрын
Just gotta back one can't wait to give it a go ,bloody awesome thing for the price between $60 and $70aud and i paid like $120 from memory for my acetech blaster and yeah the blaster looks better but i can get 2 T238's for the price of 1 blaster and the quality is about the same i would say in terms of how bright the LEDs are
@supaairsoft 3 күн бұрын
@@drewmurray6480 exactly! Awesome price to performance value!
@SHIFED 5 күн бұрын
does the lens cover withstand bbs? what about the button on the front? can it be destroyed by bb?
@supaairsoft 5 күн бұрын
I have gotten the lens and the body shot, but never the button. So from experience with ONE bb being hit in each spot, hasn’t broken yet! Your mileage may vary tho
@recticle4447 5 күн бұрын
Nice, thats my foregrip design, hope you like it! Which website did you get it from?
@supaairsoft 5 күн бұрын
@@recticle4447 absolutely killer design man! Got it off thingiverse! Big props to you my guy 🔥
@xDarre 6 күн бұрын
750 views in 24 hours is crazy. Keep it up Supa!! I'd love to meetup and play airsoft sometime. I'm also in Houston area !
@supaairsoft 6 күн бұрын
@@xDarre Yessir! If you see me around say hi!
@Phantomreaperairsoft 6 күн бұрын
the plumbers tape did in fact, make my gun worse (i wrapped everything in plumbers tape) real note thanks for the tip man was a lot of help
@supaairsoft Күн бұрын
LMFAO thatd be a cool like concept skin for valorant or something hahaha. Of course, glad I can help people out!
@Woosahjw 6 күн бұрын
After adjusting the Vertical, do you put back the gearbox pin?
@supaairsoft 6 күн бұрын
@@Woosahjw yes after everything is set and done you put the pin back in.
@timb.4617 6 күн бұрын
He did it wow nice. Einfach ein Macher. Nice Video Thank you:D
@supaairsoft 6 күн бұрын
@@timb.4617 you’re welcome! Hopefully it helps!
@StantonLuke 7 күн бұрын
Thanks for this.. gonna try the plumbers tape and vertical nozzle alignment. However I do not have a screw in the stock.. it’s an MCX and there is two pins holding the GB in, the Lower receiver pin and the trigger pin. So I will play with the screws in the grip and see the difference.
@supaairsoft 6 күн бұрын
@@StantonLuke oh dang I wasn’t aware of the MCX not having a back screw. Definetly try it with just the pistol grip screws. It should still somewhat be applicable!
@edarre 7 күн бұрын
The plumber's tape mod actually worked really well for me, shooting lasers now!
@supaairsoft 7 күн бұрын
@@edarre yessir glad it helped!
@xDarre 6 күн бұрын
Me too! My HPA is crazy now
@goldenfox334 8 күн бұрын
the issue with the creaking as you put it is not a issue with 3d printing durability, this is a issue in your design and it tolerances. tighten them up and introduce some grease, nothing crazy but just enough to ease up the friction. if its just a plastic shell around factory made parts to make the gun work then its 100% a design issue that just needs worked out. btw 100% infill is a serious waste for a airsoft gun. I manufacture full guitar bodies that are under constant load from the strings which is about 250lbs of pull and ive originally used 25% infill but later relised with a bit of math that 17% is plenty. not to be a snob but i seriously dought your airsoft gun is handling the same kind of force my guitars are. id say turn up your wall count and drop the infill down to 15%
@PythonPolaris 11 күн бұрын
Yoo I'm the guy in the green hoodie at the end and at 6:37 was also my first day of airsoft
@supaairsoft 10 күн бұрын
Oh hahaha very nice! Howd you like your first airsoft experience?
@PythonPolaris 10 күн бұрын
@ it was great! I went with a couple of friends. Chad, who was the guy who said “please don’t” and Anthony, who was the guy you ran into lol
@supaairsoft 10 күн бұрын
@ all yall were super fun to play with! Hopefully I see yall around more often!
@timb.4617 11 күн бұрын
Am Video of Nozzle Alignment would be acutally very nice:)
@supaairsoft 11 күн бұрын
@@timb.4617 should be coming out this week!
@Sire.English 12 күн бұрын
The marshall at the open doorway not wearing any eye protection 😅
@supaairsoft 12 күн бұрын
@@Sire.English oh yea we don’t talk bout that 😂😂
@daikaijureview6001 12 күн бұрын
What is the best material to print a airsoft shotgun shell with?
@supaairsoft 12 күн бұрын
@@daikaijureview6001 PETG imo but PLA would work too.
@davidflorek2165 11 күн бұрын
For customizing my Cyma, front handguard from AK-12, pistol frip from AK-19, muzzle devices, PT-1 stock and some small internal things I used PLA. Works really well but you need to have perfectly adjusted temperature and layer adhesion.
@xDarre 12 күн бұрын
Not the Pony 😢
@supaairsoft 12 күн бұрын
@@xDarre indeed the pony! It was fluffy
@josephcrego7046 14 күн бұрын
Lol players over shoot go to a warzone (what Airsoft is trying to reenact WAR) and tell them to stop over shooting….
@soliath8358 15 күн бұрын
well now i have bought 2 diffrent rifles where the triggers was different. so now i have 2 new rifles that i dont use and i have a hard time selling again :-( i bought the backdraft innovation phoenix hpa as my first because it was cheap and affordable. and now when i look back. With all the money i spend i could have had a top high end hpa and all..... i hate myself.
@supaairsoft 14 күн бұрын
@@soliath8358 yeaaaa sometimes you live and ya learn! Sell it on eBay, or HopUp app
@riobluespartan6350 15 күн бұрын
Would it still need battery inside it? I'm new to this?
@supaairsoft 15 күн бұрын
@@riobluespartan6350 yes you will need a tiny 7.4v lipo to power the unit.
@alexsotelo793 18 күн бұрын
This video is SUPER useful! But I need a quick run down of help… so I wanna put a Matrix x T8 x SP Systems CNC HPA Magazine Adapter on my gbbr. Is it ok if you can help me pinpoint the parts that I really need and don’t need ? (Also thank you for influencing me into hpa🙏🏽😂)
@supaairsoft 18 күн бұрын
@@alexsotelo793 thank you! I’m not too too familiar with GBBRs but if that’s the right adapter for your gun, all else you need is the remainder of the HPA system: tank, reg, line. I go through purchasing those three in the video
@alexsotelo793 18 күн бұрын
@@supaairsoft THANKS SO MUCH!
@BaileyBoyBoxing 19 күн бұрын
Are the evike boa and other mystery boxes on their website actually legit? I am a little skeptical.
@supaairsoft 19 күн бұрын
@@BaileyBoyBoxing They’re 100% legit lol. I’ve been buying them for years now. Just don’t get the graveyard ones. Only buy the blue mystery boxes to get working good new guns.
@BaileyBoyBoxing 19 күн бұрын
@supaairsoft so right now I'm seeing a boa "flash edition." This would be the one I should purchase if I would correct?
@supaairsoft 19 күн бұрын
@ should be! Depends if you like the potential winnings
@BaileyBoyBoxing 19 күн бұрын
@@supaairsoft alright thanks, love the content man keep it up!
@SubtoMeorIDK 20 күн бұрын
As soon as I seen the face I was like where is the acent😢
@JayyHern 20 күн бұрын
What skeletonized m4 receiver is this?
@supaairsoft 20 күн бұрын
@@JayyHern Lancer tactical one from Airsoft megastore
@SoldierfromDT 20 күн бұрын
Think this'd work on the matrix x golden eagle 870s?
@supaairsoft 20 күн бұрын
@@SoldierfromDT the shotgun I’ve got is a matrix GE m870!
@SoldierfromDT 20 күн бұрын
@supaairsoft oh man, I'm slow 😭 I read JG somehow
@VigorousVolt 21 күн бұрын
the titan II is a very good trigger board that doubles as an fcu so all you need is a battery everything else is mobile very useful.
@supaairsoft 20 күн бұрын
@@VigorousVolt Are the different settings change through trigger commands?
@VigorousVolt 20 күн бұрын
@ i don’t think i quite understand what you mean
@supaairsoft 20 күн бұрын
@ it doubles as an FCU and trigger board. So for example the Wolverine spartan trigger board is like that. To switch between burst modes and fire rate etc, it’s all trigger commands. Same with like a Perun v2 hybrid for aegs. Was wondering if it has settings to change like that via the trigger board
@VigorousVolt 20 күн бұрын
@@supaairsoft yea in the app you can change to everything. even semi ramping which comes from paintball.
@supaairsoft 20 күн бұрын
@ OHHH it has Bluetooth!! That’s sick
@MottuFPS 22 күн бұрын
Cool video bro, Do you have any recommendations for a solid base gun to eventually hpa? I want to get an m4 but not sure what would be a good option
@supaairsoft 22 күн бұрын
@@MottuFPS hmm I don’t have a one stop shop recommendation cause it comes down to externals that you’d like to keep. Cause you’ll be gutting the inside of the gun haha. Really you wanna look for a full metal gearbox, version 2 ofc, and a full metal upper and lower just cause it’s higher quality than polymer for m4s. Stay away from krytac and aps if you’re wanting to hpa, as well as f1 aegs. Those have odd compatibility issues from what I’ve heard and you’d require some mods. Tbh any away converting to an HPA will require some modding so choose something you like and has solid construction that you can keep, meanwhile gutting out the inside.
@MottuFPS 22 күн бұрын
Ok thanks for the info ☺️
@BirdBuiltCustoms 22 күн бұрын
Time stamps brother 🙏😘
@supaairsoft 22 күн бұрын
Always got em!
@supaairsoft 22 күн бұрын
Also, dont forget to enter in for the 1000 subs giveaway that ends soon! gleam.io/YhgMh/1000-subscriber-giveaway
@esta511 22 күн бұрын
hi could you make the nozzle alignment video please
@supaairsoft 22 күн бұрын
@@esta511 sure thing! I’ll put it down on my list of videos to make for y’all!
@esta511 22 күн бұрын
@@supaairsoft thanks i really appreciate it
@Brav01_Designs 22 күн бұрын
Good Reg makes a big differnce in performance, a lot of cheap one are very inconsistent, also fill the tanks in a good compressor, manual pumps are very bad and had one that was leaking oil/water inside a tank, reduces performance and damages engines so many additional things, but good video overall, Congratz
@supaairsoft 22 күн бұрын
@@Brav01_Designs that’s a very helpful one! A good reg goes a long way!
@freekill123100 20 күн бұрын
I run the redline reg its amazing with a ninja SLP tank.
@Brav01_Designs 22 күн бұрын
Gorilla for the win, use it in my 2 hpa, it's mad! their trigger boards are also insane!
@supaairsoft 22 күн бұрын
@@Brav01_Designs see I gotta get my hands on one man! Which trigger board do you recommend from them?
@camiisherechannel5989 21 күн бұрын
got one for my article 1 and I love it
@danielarturodebernardogome832 22 күн бұрын
I have the black leaf but there is no SAFE option… also, I have to place some foam in the gearbox for it to shoot, how did you mànage to solve this?
@supaairsoft 22 күн бұрын
@@danielarturodebernardogome832 if the switch that’s on the black leaf board on the front is covered up it’s in safe, then uncovered is semi, back switch uncovered is full auto. I believe this is correct. It’s some combination of the two switches toggled and untoggled.
@supaairsoft 22 күн бұрын
@@danielarturodebernardogome832 as for the foam, what’s this for?
@danielarturodebernardogome832 22 күн бұрын
@@supaairsoft I bought the inferno gen 2 with black leaf trigger board. It wont fire unless there is a “safety” button pushed, wich only gets pushed with the gearbox closed. And as for the selector switch, there is only semi and auto, no safe option. Perhaps you could do a video on how to set it up correctly but I think thats just how the black leaf works…
@supaairsoft 22 күн бұрын
@ the safety yes only gets pushed with the gearbox closed. It starts off in safe, then moves on into select fire modes. As far as I’m aware there isn’t a model that doesn’t have safety on it. If you watch my AEG to HPA conversion video I showcase the black leaf installation briefly. Maybe that can help.
@danielarturodebernardogome832 22 күн бұрын
Yes just watched it! What I am referring to is the blue thing next to trigger at minute 11:54!
@StantonLuke 23 күн бұрын
Thanks for the video, nozzle alignment video needed ❤
@supaairsoft 22 күн бұрын
@@StantonLuke yessir 🫡 will do!
@StantonLuke 22 күн бұрын
@ my alignment issue is it two close to the top.. which I think is ok ish.. it shoots 1.14J on 90psi
@supaairsoft 22 күн бұрын
@@StantonLuke Thats pretty good! Yea thats a relatively easy fix with alignment. Ill be sure to try to make a video covering it one of these days!
@T238dotnet 23 күн бұрын
yo actually we're releasing a new FCU with an OLED screen and a joystick
@supaairsoft 23 күн бұрын
With an OLED screen! Now that sounds super cool! I’d love to review it on the channel, I’m sure my viewers would be interested 🔥
@Pranaynay 22 күн бұрын
proof
@DatAirsofttDude 7 күн бұрын
Get the gate titan II for hpa you can tune trigger from your phone @supaairsoft
@drewmurray6480 3 күн бұрын
Send him one for a testing video please
@rosspixs4176 23 күн бұрын
Good fcu is titan 2 I use one with a jack and it makes it night and day
@supaairsoft 23 күн бұрын
Ooh that sounds like a good option, ill have to take a look into it!
@StantonLuke 23 күн бұрын
True, I have the Titan 2 and pulsar D combo (nice and easy to tune)
@Leftdeadboy 23 күн бұрын
want the black leaf but its out of stock
@supaairsoft 23 күн бұрын
Its in stock here: www.airsoftjunkiez.com/blackleaf-airsoft-speed-board-polarstar-redline-gen-2/
@LuciTheWendigo 23 күн бұрын
woah im early danggg, HI SUPA!! <3
@supaairsoft 23 күн бұрын
@@LuciTheWendigo what’s good! Welcome to the party!
@GWswift 23 күн бұрын
yo nice vid
@supaairsoft 23 күн бұрын
Thanks man!
@ruz556 23 күн бұрын
yoo supaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
@supaairsoft 23 күн бұрын
Yoooooooooooooooooooooooooooooooooooooooooooo
@ImBatman-yk1yx 26 күн бұрын
high grounds is such a great field but I haven't been here in a while because its the closest field to me but a 40 minute drive
@supaairsoft 25 күн бұрын
@@ImBatman-yk1yx oh dang, yea it’s about 30 min from me too hahah I got about once a month ish!
@Krillatine 27 күн бұрын
amazing vid i thought i was watching a profesional lol thanks bro
@supaairsoft 25 күн бұрын
@@Krillatine thanks a ton man! I’m tryin my best hahaha
@JaydenJ123 28 күн бұрын
What outer barrel is that?
@supaairsoft 28 күн бұрын
@@JaydenJ123 just some random one off airsoft megastore. I put a 3M vinyl carbon fiber wrap on it to make it look like that.
@JaydenJ123 28 күн бұрын
@ ok thank you
@douglassshephard3732 Ай бұрын
I have two polar Stars, AR, one short one long.
@supaairsoft 29 күн бұрын
@@douglassshephard3732 nice! Which engines for both of em?
@Rowley-Airsoft Ай бұрын
Enjoyed & subbed! Keep it up:)
@supaairsoft 15 күн бұрын
Awesome, thank you!
@PolarStarAirsoft Ай бұрын
Another awesome video!
@supaairsoft Ай бұрын
@@PolarStarAirsoft Thank you! 🔥
@MyOffDay Ай бұрын
Cool vid! We desperately need more of these large indoor CQB where I'm at in SoCal!
@supaairsoft Ай бұрын
@@MyOffDay thanks! How far is the closest one? Idk anything bout Cali haha isn’t there the evike one in Alhambra?
@MyOffDay Ай бұрын
@ most are 20-30 mins by inconvenient freeways, sadly the evike here is a superstore with a range. Guess I’ll fly out!
@supaairsoft Ай бұрын
@ come thru to Houston my guy! We’ll welcome you with open arms!