Жыл бұрын
Пікірлер
@josephpadula2283 8 күн бұрын
Sir The sound goes out at 5:07 till near the end at 8:30!
@David-vb8ih 12 күн бұрын
Let me know when they are "Made in the USA". I will be saving my money until I find American made boots so I can pay more.
@FightingIbisFarms 11 күн бұрын
Cool story
@jerrywilhelm996 Ай бұрын
U need a true 3pt quick hitch with hydraulic top link
@fullers1966 Ай бұрын
If your remotes are leaking you can rebuild them there are seals in them that you can fix
@christinemarcotte9544 2 ай бұрын
I think they’ll always fight
@johnc5872 4 ай бұрын
I'm not going to lie, I was sitting here trying to watch this video trying to learn about those boots but that damn music in the background the entire time was too damn distracting.
@joesprincess8636 4 ай бұрын
Their is no longer a company who makes a great pig trough like back in the day. I bought an aluminum one and they destroyed it. A steel one is better but has a bar threw the middle and they just pick it up and throw it around. I had to build a wooden box around it and fill with concrete but now it's a pain in the butt to clean. Your plastic one will do great when their tiny but they are going to throw it all over and waste feed and water
@FightingIbisFarms 4 ай бұрын
We have a newer video showing our current hog feeder. We found some 4 hole Hog Slat gravity style feeders that have worked perfect from weaning to finish.
@joesprincess8636 4 ай бұрын
@@FightingIbisFarms awesome can't wait to watch
@joannemiller5703 4 ай бұрын
Kioti doesn’t stand behind its warranty. Was told it had a 6 year warranty. Had tractor for less then 2 years. Was told that the hydraulic system is not covered by the warranty. Do not buy
@MicroUrb 5 ай бұрын
Do you have a video showing you developing the concrete forms?
@FightingIbisFarms 5 ай бұрын
I do not. Once I set the 4x4's, I gave myself a 1.5" space around the perimeter and then staked 2x4's in the ground for the forms.I squared them up and made sure they were level using a string and string level. Hope this helps you out.
@kevinpampaxton9270 5 ай бұрын
Believe me it’s always good to look into the the good and bad and ugly on every piece of equipment and it’s also going to help the manufacturers hopefully,so good videos
@Native_love 5 ай бұрын
I have the moctoe Wolverines and they have an incredibly soft sole and I love them! The softer the soles, the better your feet and back will feel at the end of the day. With the softness comes less wear resistance like with tires, the harder the tires the longer the mileage rating and the softer the tires the shorter the lifespan. I'll take the softer tires or boots anytime!
@shaunnightfire8269 6 ай бұрын
I have a similiar project I am working on. Thanks!
@bigpapa5453 6 ай бұрын
Just saw your video and appreciate all the info I am going to look at the dk series this week in Ocala Leaning toward the 5010 Was wondering if you shopped florida dealers before georgia and if so was there any significant difference in price I can forego sales tax in Fl with my Ag Exemption Not sure about Ga I am around Lake City so Norman Park is not much further north than Ocala is from me Thanx again
@FightingIbisFarms 6 ай бұрын
I was shopping the Florida dealers during a time when we were all uncertain about Covid-19 and dealers were having a hard time getting inventory. I checked with every North Florida dealer and couldn't find my tractor. I got lucky ad found a good group of folks up there a Hurst Tractor. I never got into talking prices with the FL Dealers because they didn't know what was getting delivered on their trucks until they showed up at the gate. It was a weird time a few years back. I did not pay sales tax in GA. because we were Ag. Exempt as well and I believe the dealer helped with that paperwork. You have access to the same benefits there as we get here. I would say find a dealer you get along with and who can work with you now and down the road.
@alansmth1729 6 ай бұрын
I owned a DS4110 Kioti that I purchased in 2010 used it with great success clearing land and more. Upgraded to DS6010 here in 2023 and traded my DS4110 for more than I paid for it in 2010. I also found out that many manufactures in the U.S. purchase the frames from Kioti to build their equipment. So the over all strength of the base of the equipment is tested and very strong. My only draw back is that manuals are slow in coming since they have been on back order for the last 4 months. I add camera to all my equipment and that is a safety issue I would recommend be added. Good luck and keep on with Kioti.
@jefferykeeper9034 7 ай бұрын
I have a ck2510 that's 7 years old and I have too remove the grill Guard so I can open the hood, the dealer says it right one my don't hinge down the like the new one's.
@frankgonzalez3822 7 ай бұрын
Unfortunately I wear 3e or F width
@Negan-lo7yr 8 ай бұрын
I've also had many Hens, they're great companions and pets, love those little dino doggies.
@Negan-lo7yr 8 ай бұрын
Great job man, God must be proud of you for creating a beautiful home for your wonderful family, thanks for sharing!
@frankgonzalez3822 8 ай бұрын
This was great infomation for me. I was looking at these boots.
@frederickburns1739 9 ай бұрын
As a retired farmer I sometimes wonder why people buy a farm tractor and do land clearing. I bought a old and I mean OLD D6 CAT for doing land reclamation!
@FightingIbisFarms 9 ай бұрын
My pocket book just won't let me. I looked at it like this, I would buy a big enough tractor that could handle about 80% of the work I needed done. When I need to focus on the other 20%, I could rent the equipment for a weekend and get everything I need done. I could not see buying a specialized piece of equipment that I would maybe use for a month and then have to flip it to get my money back. So far so good for us, thanks for watching!
@BittyVids 2 ай бұрын
Because we need a single piece of equipment to do everything. Hard to justify more for 5-20 acres.
@macEboy 9 ай бұрын
Nice work! Thanks for the concrete lesson. Hope you guys held up ok from the storm? We made out ok here in Middleburg.
@FightingIbisFarms 9 ай бұрын
I felt bad staying home today. We set up a wind barrier for the pig and spent some quality time with the family. I think we got very lucky this time around.
@macEboy 9 ай бұрын
@@FightingIbisFarms at least we didn't get any torrential rainfall. Glad to hear you guys made out okay
@ToddWilsted-en1ki 9 ай бұрын
Does it have a tank for DEF or just filter? Thx
@FightingIbisFarms 9 ай бұрын
No DEF, just the filter that burns off the build up.
@barney1941 9 ай бұрын
try a hydraulic top link for$250 you will never go back
@Jo-tw8kr 3 ай бұрын
Agree! I didn't think I needed it until I had it!
@barney1941 9 ай бұрын
is that mechanical fuel injection?
@FightingIbisFarms 9 ай бұрын
I'm not sure, might be mechanically driven but electronic timing.
@smoothoper8tor19 10 ай бұрын
The Funky Chicken Coop. It's looking good man. Chrissy Cracked me up with the, "Gotta keep it ventilated".
@macEboy 10 ай бұрын
Thanks, Mike and Chrisy for the update! The coop looking nice.
@rbrown9180 10 ай бұрын
What was the turn around time on the resole?
@FightingIbisFarms 10 ай бұрын
I have not needed them resoled yet. When I do I will let y'all know.
@WadePaschall Күн бұрын
The company quotes 3-4 weeks, but can often do it quicker.
@lilsilagelad1361 11 ай бұрын
What ratio of tinner acetone to paint did u use
@jimlandreth555 11 ай бұрын
Love the video .... I have an old set of harrows with no name ....may try to upgrade it. Thanks
@FightingIbisFarms 11 ай бұрын
It's cheaper than buying new right now!
@gk5891 11 ай бұрын
Brannock (Standing) - 11E Brannock (Sitting) - 10.5E Duradero - 10.5M(D) Room for my preferred orthotic. Just removed the OEM insert. Snug without being tight.
@EKfrios 11 ай бұрын
what size shop vac was used? how many HP. I have a small shop vac just don't know if it has enough vacuum.
@grandpa7278 11 ай бұрын
Ten hrs on my new DK 4720, love it so far, but those chain stabilizer bars are my only worry. Likely I'll upgrade at first service at the dealership. btw, dealer is ten minutes away, which is main reason for getting this Kioti. ...never heard of it before
@gk5891 Жыл бұрын
I believe they are using Nushoe in San Diego for resoles. They get $85 to do the equivalent resole and restoration to a Red Wing (using OEM Vibram Cristy). 11E - Standing Brannock 10.5E - Sitting Brannock 10.5M(D) - Duradero They had room for my preferred orthotic. Just removed the OEM insert and replaced. Snug without being tight.
@FightingIbisFarms Жыл бұрын
Well than, that makes them an even better choice.
@gk5891 Жыл бұрын
@FightingIbisFarms I'm just reading between the lines. Nushoe does a lot of repair for the shoe manufacturers, the armed forces, is based out of San Diego and Todd threw some Nushoe Military Insoles (That I don't believe are commonly available) in the box with some of my boots after I mentioned liking firmer insoles.
@kapperoutdoors Жыл бұрын
Im on my 2nd Kioti and i still love it! Thank
@BuzzJones Жыл бұрын
NICE VID, What fitting did you use for the Vacuum on the Hyd. filter change ?
@FightingIbisFarms Жыл бұрын
This should work www.homedepot.com/p/RIDGID-2-1-2-in-Power-Tool-Adaptor-Accessory-for-RIDGID-Wet-Dry-Shop-Vacuums-VT1407/100206293
@georgecass8529 Жыл бұрын
Boy I hope you are not putting gas in that gas tank LOL
@andrewsmith9980 Жыл бұрын
would like to see how they maintain these in 10 years. I believe the parent company used to make mini trucks and is impossible to get parts for them. vehicles are only 10 years old. are these significantly cheaper than a comparable John Deere or Kubota. don't see myself buying new but think a 10-year-old well supported tractor would be of more interest
@whilomforge3402 Жыл бұрын
I bought a cs2520 last week. It was $10,000 less than a JD 1025r, and $6,500 less than the 1023e. Roughly $7,000 less than Kubota Bx.
@bradleycampbell1634 Жыл бұрын
Kioti tractors have been around for a long time
@Mantooth2851 Жыл бұрын
Parts are my concern as well. The tractors look nice and seem to perform well. I worry that I won't be able to find parts 10, 15, or 20 years from now. And before anyone comments on my 20 year concern, yes..people do keep tractors that long. My current tractors are a '89 Ford 1120 and a'97 Kubota M4700.
@grandpa7278 11 ай бұрын
@@whilomforge3402 Oregon, my DK 4720 w bucket and a 6ft Brush hog was $38,100 delivered. I didn't shop or negotiate, how'd I do?
@nilskurtze4927 Жыл бұрын
Vaccuum Trick works. Took a Gas snorkel to fit the Vacuum into. Kfilter Change took me Just 15minutes. Thanks a Lot.
@johnflynn9756 Жыл бұрын
Thanks for the review. I have a DK4210 SE with 600 hours on it. This is my 4th Kioti. I started with a CK27 and moved up this tractor. I think it is worth mentioning that Kioti used to manufacture Kubota's and several other brands. A Kioti is heavier built than Kubota's. One of the strongest features of these is how strong their hydraulics are, their warranty, and turning radius. My dealer, Timberstar Tractor in Vernon, BC is outstanding. Highly recommend!
@clinta..3702 Жыл бұрын
Yesterday I test drove the NS and NX series tractors 45 and 55 HP versions. I found the loader hydraulics jumpy if trying to roll the bucket while lifting the bucket as if it didn't want to do both loader operations at the same time. I'm finding nothing really covering that online, but it is a Huge dislike for me, though it's the only fault I can find with Kioti. I was wondering if the DK series is better with the hydraulics. Though the kubota L4701 and MX5400 I test drove seriously lack in lifting capacity compared to kioti, their hydraulics were not jumpy at all when rolling or curling the bucket while lifting or lowering simultaneously. Can anyone explain the difference here?
@davidvick749 Жыл бұрын
POS
@marvinbrickhouse9122 Жыл бұрын
I have the same year dk 4710 hydro nothing but good to say about Kioti so far I use mine as a general purpose tractor lifting loading grading some light farm work it has done great close to 200 hrs no warranty issues this far
@eastside0434 Жыл бұрын
Have you ever fabricated an old heavy duty plow disc into a cowboy skillet for grilling.?
@FightingIbisFarms Жыл бұрын
I have not. I scraped them all.
@bumblefritz Жыл бұрын
I got a pair of these last fall. They haven't seen heavy work use yet but they handle the midwestern weather conditions well and they are very comfortable. They have great customer service as well. The biggest thing foe me is that I have finally found a boot that fits my large, flat, extremely wide feet. I can fit my custom orthotics inside and they are still very comfy.
@FightingIbisFarms Жыл бұрын
I just replaced my insoles with some heavy duty ones at Walmart. The boots are holding up but I put a hurting on those insoles.
@JohnVenable-ou1dh Жыл бұрын
Like seeing old equipment being reused an restored have a lot my self
@FightingIbisFarms Жыл бұрын
Thank you, I loved doing this project.
@uncledanny7 Жыл бұрын
I’m in the process of rebuilding a old set of harrows at the moment and will be using your idea on mine. Great video series you did here
@FightingIbisFarms Жыл бұрын
Thank you, looking at the prices today you are doing yourself a huge favor fixing them up right.
@yokutman Жыл бұрын
Looks great! Glad to see this in the local area. Good luck on building the social media aspect. Your content is interesting.
@macEboy Жыл бұрын
Great video guys! I really appreciate your time making these videos. Great idea with the question and answer session. May help other kids listen. I got my Viadialla onions that are almost the same size as yours. You Middleburg Neighbor Mac
@doublebase6509 Жыл бұрын
Love the review! And best of all, it’s honest and you actually worked these things pretty hard. I’m loving mine, and I’m hammering them. I haven’t had any issues with the stitching - actually they’re probably the best stitched boot I’ve owned, however I did toss the insoles away after a couple weeks. They were just a little too flat for me, I ended up buying a set of heavy duty Dr. Scholls at Walmart for $15 bucks...problem solved for me. But nice job! I will be ordering a shirt.
@FightingIbisFarms Жыл бұрын
Thank you for stopping by and all the kind words. Definitely agree the insole could be more beefy to ad the long lasting comfort. I think I caused the stitching to come apart but I can't remember what it was.
@atlas283 8 ай бұрын
I've been waiting for Amazon to complete my return so I can use an Amazon gift card to buy some thorogood boots. I've seen the duradero 8" and was curious about them. After your review I decided to go ahead and order the dark brown/black 8" non steel toe (apparently the 8" black doesn't come in steel toe). I think I have a pretty good eye for quality in boots (danner, thorogood, red wing, and ariat are my benchmarks) but these are much more economical than three of those. We will see how they compare. Thanks for a useful review.
@richardl.993 Жыл бұрын
Had my dk 35se for sixteen years with no problems. It was an open station shuttle. Now in my retirement years my main use is snow removal so I upgraded to the DK 5320se cab model. I do have a great dealer/ service in my area so that is a plus because there are no other reputable dealers in my fifty mile radius
@FightingIbisFarms Жыл бұрын
That's great to hear. Thanks for stopping by!