Would be Great to send only edrums sound to FOH, and Mic signal only to own IEM as an output route option.
@saulhudson3025 ай бұрын
Hi guys, Recently purchased the EAD10 and really like it. I think i assigned a tempo to a couple of scenes because it has it on the screen...........can I remove tempo from the scene ? Thanks ✌
@MOODOIR6 ай бұрын
My EAD10 doesn't see the silent drums file, any ideas how to resolve? The flash stick works as I can save to it, but for some reason, it just doesn't read the low volume file. Thanks.
@vaggbaba11 ай бұрын
DTX502 Touch app is discontinued. Be carefull buyers. Yamaha throw away the app for this module. I bought this module 2 years ago now a basic feature lost. be aware.
@rocker7762 Жыл бұрын
what if I didn't save the "normal" scene before importing the low volume ones? 😕 is there a way to re instal the old scenes?
@matt09ward2 күн бұрын
Just freaked out because I did the same thing.... I'm fairly sure the normal kit settings are still there 1 to 50, the update just loads user kit settings 1 to 42... At least that's what im hoping. If you had had custom user kits saved then they would have been wiped with the new LV upload.
@charliecabello04 Жыл бұрын
hey every time I connect my ead10 to my MacBook Pro 13 it never reads?
@nickheadlee1027 Жыл бұрын
does any one know if I need a actual trigger like the dt50s for the kick drum? I have the module and mic for ead10, my kick is a 14in mini kick drum with silent stoke mesh head
@mapex311 Жыл бұрын
How do these new scenes sound? Are they specifically only for mesh heads or can I use them on normal mylar acoustic as well?
@SexyDeath115 Жыл бұрын
Y las escenas de la 1 a la 50 se pierden para siempre???? Explican como el pico hijos de re mil
@fitnesstorresflores6477 Жыл бұрын
why it shows usb invalid device when i insert mi usb to donwlod the informacion?
@radicalsurge6 ай бұрын
Had the same issue....used an 8 gig usb drive and then it worked
@gikochinai4527 Жыл бұрын
Hello, i had a question about your EAD10 video with snare triggers. Is that the same process you follow when installing a kick trigger?
@fitnesstorresflores6477 Жыл бұрын
Thanks it was really helpfull.
@arquifilm Жыл бұрын
Obrigado, seu vídeo me ajudou muito. Thanks.
@OrionMusick2 жыл бұрын
how to setup 4 layer sounds in stacking or alt mode on DTX700?
@suedehead4162 жыл бұрын
my EAD10 module is brand new,,do i still have to back up the data on usb flash drive? before i install the new firmware update?
@Umat1652 жыл бұрын
👍🏽🔥🔥👍🏽
@Umat1652 жыл бұрын
👍🏽🔥🔥👍🏽
@Umat1652 жыл бұрын
👍🏽🔥🔥👍🏽
@GiulioDrums852 жыл бұрын
Thank you so much!!!
@michaelvanner53912 жыл бұрын
If you put the triggers on the drums does it still work on the Zildjean l80s without the triggers on them ?
@ryanlee9150 Жыл бұрын
What do you mean? If u put the triggers on the drum, does the cymbal work without? What's the relation between the two?
@electricbarbecue48063 жыл бұрын
this needs routing control for the aux in, allowing it to send to phones only.
@jimmybarr27053 жыл бұрын
Hey I’m new at this Yamaha EAD10 I can’t figure out how to do scenes in a different scenes on my drum tracker I try press the menu button on the sign and I tried turning the scene up and it doesn’t work it takes me to the home and yell but the first time I did it I tried it work but I don’t know it was the right thing I did because I’m totally blind I became blind around 2/3 and 18 due to infection in the eye so I’m doing everything with ear and feel and it drives me crazy I don’t know how I did that before now I can’t do it can you help thanks
@alexstig86243 жыл бұрын
Guys i have a problem,I followed step by step but in the moment to update the firmware and I push click button appears "file non,don't shutdown". what is the problem?? i'm going mad....thanks in advance
@alexstig86243 жыл бұрын
Problem solved. In the main file to download You have to open the file in the usb device and copy the 3 files in the usb device,than you can upload,thanks for your video
@javierbriceno59813 жыл бұрын
Lastima que no hablo inglés, lo necesito en español todos estos videos
@vickuskuhn25193 жыл бұрын
Hi can you please help i love the ead10 but, i cat figure out something each snare hit after a cymbal hit is very soft and no reverb can you help what is the correct mic and trigger level
@jimstav113 жыл бұрын
There is a way to have all scenes at the same time without replacing the original ones and without saving and loading them one by one. 1. Backup your original scenes with "Save --> All" 2. Load the low volume scenes with "Load --> All" 3. Save the low volume scenes with "Save --> All scenes" using a new filename 4. Load the original scenes with "Load --> All" 5. Load the low volume scenes with "Load --> All scenes" using the filename you gave Now you should have the original scenes at numbers 01 to 50 and the low volume scenes at the user scenes 01 to 42.
@matt09ward2 күн бұрын
Fairly sure loading the new LV scenes doesn't touch the originals. It just ads 42 new scenes into the user custom bays. If you had custom scenes already made they will be wiped though so you need to save them.
@aleshoother4 жыл бұрын
I have a problem. When i record with any scene, the kick is too loud. How should i set the module? It Sounds fine but the kick is over all. I have no triggers, only the original mic + module
@ryanlee9150 Жыл бұрын
Did u find a solution?
@hanss82344 жыл бұрын
great video!
@lehao68724 жыл бұрын
Hello ! Can you tell me the function "Mic noise gates" on yamaha ead10 should be "on" or "off" ag? And the parameters below, how to set them properly to go to work?
@yungpxnk4 жыл бұрын
Do I need a Yamaha thumb drive? It won't recognize mine. I get a "No Media" message. I'm using a regualr SanDisk drive. My file isn't on a folder on the drive.
@AlmanzaAntonio Жыл бұрын
Me 2..same problem,i have several pendrives,i insert them into the ead10..and apears a message that the usb doesn't work..please yamaha help on this want🥁✌️
@radicalsurge6 ай бұрын
@@AlmanzaAntoniohad the same issue...used a 8 gig pen drive and it worked
@RettaTheRipper4 жыл бұрын
I downloaded the low volume file onto a flash drive but the EAD is saying there's no file. I followed this video and backed up the original scenes etc so that's done, but it won't find the low volume ones.
@hyreison4 жыл бұрын
Please i need urgent help, i tried commenting on the dtx402k video but its locked. Whenever i try to use the dtx402 app on my dtx402k, it aske me to update and i pess the following buttons that they ask. The thing is, i dont know if it is acutally updating or not. It just keeps flashing but nothing else. I waited for about 30mins and still nothing and i stopped it. Do i need to connect it to my PC or just the phone and does it need to be connected the whole time and am i doing something wrong? Please help!
@tomasberto82114 жыл бұрын
The kick trigger on my ead10 does not work on mesh head even if updated. It works good with normal batter head so I have to find the solution for the mesh. Any suggestion?
@ryanlee9150 Жыл бұрын
Did u find an answer? I have the same problem !!
@tomasberto8211 Жыл бұрын
@@ryanlee9150 yes. you have to use a small bass drum (up to 18 i guess) and it should work
@ezrafabian4 жыл бұрын
I already follow all step, but when i hit metronome button (1:05) it can’t be updated. The description on the screen is NO MEDIA. What is wrong? Thankyou
@loho1744 жыл бұрын
make sure the file is not in a folder on your thumb drive!
@grahamthedrummer82974 жыл бұрын
Do you need to use triggers on the mesh heads to make it work?
@loho1744 жыл бұрын
yes!
@ryanlee9150 Жыл бұрын
No!
@ryanlee9150 Жыл бұрын
@@loho174 you don't! It works fine still I don't get what you mean!
@carlupthegrove2624 жыл бұрын
This really helped me to set up my kit with mesh heads and EAD10.... I couldn't have done it without this video Thank you
@OsagieGuobadia4 жыл бұрын
Drum like a actual good drummer, folks. 👍🏿😀
@DrGray_Drummer4 жыл бұрын
I've had this for about 6 months. Positives, quick, easy way to record your playing, learn from mistakes, can turn your nice accustic kit, into a e kit, but the best part is the Rec n share app. I will probably use the voice feature, but besides that, I disabled the unit, mic my kit, and record. I can add a little extra reverb, and compression, but I want my kits to sound like my kits. I do use the module as a master volume control on occasion as well. If anything, it's a great practice tool
@dtxdrums31624 жыл бұрын
Great to read about all the ways you are using the EAD10! We believe it's something every drummer should own.
@DrGray_Drummer4 жыл бұрын
@@dtxdrums3162 I think if Yamaha continues with this kind of technology, I believe it can change the entire recording process. I did a recording of Walking on the Moon by the Police, and I've asked people if they hear anything different. They think it's the actual studio version. So will i
@dtxdrums31624 жыл бұрын
@@DrGray_Drummer The EAD10 has definitely been making waves in the drumming community. Really helps make the process of recording and practicing so much easier. That's great to hear, if you post any drum covers recorded with the EAD10 we'd love to see them!
@eikefreier67384 жыл бұрын
how about machine gun effect when playing with trigger?
@dtxdrums31624 жыл бұрын
You can always edit the trigger settings to try to prevent machine gunning, like lowering the sensitivity.
@AfonsoPena14 жыл бұрын
Could not make it work. Saved the scenes as instructed, but the EAD doesn't load the EAD10LVDrums when I connect it. Only the "ALL" file I've created in the first step.
@dtxdrums31624 жыл бұрын
Make sure the EAD10LVDrums file is not in a folder on your USB drive.
@jahmarsshiva50644 жыл бұрын
Hi I try it out but it did not work out. What can I do ????????
@dtxdrums31624 жыл бұрын
Can you provide more details of how it did not work? Also, make sure the file is not in a folder on your USB drive.
@KYNG0004 жыл бұрын
Can you import your own samples into the EAD10 V2 drum module ???
@dtxdrums31624 жыл бұрын
Of course! You can import .wav files by going to MENU -> Job -> Wave -> Import. You can only import up to 100 files/32 MB.
@silotx4 жыл бұрын
Is there going to be a full kit with yamaha shells + triggers , ead10 , hardware ?
@dtxdrums31624 жыл бұрын
Not that we know of! But dealers might come out with bundles like that.
@bassdrumcreep78844 жыл бұрын
Will this work with RTOM Black Holes instead of mesh heads?
@dtxdrums31624 жыл бұрын
We can only say for sure that they will work on regular mesh heads. But you can always tweak the trigger settings if the RTOM heads do not trigger right.
@bassdrumcreep78844 жыл бұрын
@@dtxdrums3162 OK, thank you for the information.
@DrGray_Drummer4 жыл бұрын
A couple things, and I hope someone can help me out? The EAD won't pick up certain accents, or even record some drum setups very well.So I'm micing my drums as well using a Tascam Model 24. Through my headphones, I'm getting the sounds I want, but they won't be recorded through the rec n share. I'm using the stereo out from the 24, and going to stereo in on the EAD. I haven't updated the firmware, as it needed to be, but is there a way to combine real mics with the EAD? I hope that made sence?
@dtxdrums31624 жыл бұрын
The EAD10's mics are optimized to pick up a regular setup. What kind of setup are you having trouble recording? As for the audio in from the 24 to the EAD10, are you going in through the AUX IN or through USB? You can also go to the DTX website forum for more help - yamahadtx.com/forum
@jerrycatania71594 жыл бұрын
Good rule of thumb here is to be sure your drums and cymbals are in a 4 foot radius of the EAD kickdrum mic in order for the sound to translate through in uniformity.
@mr.dizini55864 жыл бұрын
How do i get the old sound back again?
@dtxdrums31624 жыл бұрын
Do you mean your user scenes? You would have had to save them before importing the low volume scenes and then load them back in again, as shown in this tutorial.
@mr.dizini55864 жыл бұрын
@@dtxdrums3162 could i delete the mesh head sceenes if i would wanted to?
@dtxdrums31624 жыл бұрын
@@mr.dizini5586 Yes! You can delete them and if you want to, import them again.
@mr.dizini55864 жыл бұрын
@@dtxdrums3162 K. Thanks a lot for the answers and the video!
@KarlLatham4 жыл бұрын
EAD10 IS A BRILLIANT MARRIAGE OF MUSIC AND TECHNOLOGY, TY YAMAHA FOR MAKING THIS POSSIBLE
@TrueArcadio4 жыл бұрын
With this firmware update is it possible to isolate and only send the trigger sounds through the mains and not the microphone? (And not affecting the microphone coming through headphones)
@TrueArcadio4 жыл бұрын
My DT50S trigger doesn't register anything while resting against the skin, I only register rim hits. It's this a common issue with that trigger? I assume it's a manufacturing defect
@dtxdrums31624 жыл бұрын
You can try tightening the mesh head to get a response. Or placing the trigger on a different area of the hoop. Make sure the trigger is securely mounted on the hoop as well! Sometimes with mesh heads, if you tighten them too far down, the hoop sinks and leaves little space for the trigger to mount on.