Material looks good. Are you purging the whole hopper?
@jcklimo6 күн бұрын
Curious your opinion on pre loading locking cylinders?
@injectionmoldingskillsmore10645 күн бұрын
They are ok with some applications & we don't use a lot of them at all over the years. Thanks for watching & the support to the channel, I greatly appreciate it.
@luismurillo32266 күн бұрын
so the part lands on the floor nice
@injectionmoldingskillsmore10645 күн бұрын
We are working on the robot as we speak O YA !!!!!! Thanks for watching & the support to the channel, I greatly appreciate it.
@SoraOfTheDarkness7 күн бұрын
i used to work at american plastics in kingman arizona. WORST FUCKING PLACE EVER. everything was unsafe. EVERYTHING. oil spills and leaks constantly inside the machine which caused one of the technicians to slip and crack his head on the molding inside the machine and passed out thankfully no one started it up but they fired him for it. hydraulic would over heat and their sollution was a fan jus tsitting outside the machine to cool it down which worked for the machine but remember this is a plastics molding facotry with no ventalation or cooling systems besides two giant swamp coolers that were over 160ft away from you. they made us work on multiple machines sometimes up to 6 in 12 hour shifts each one not stopping its production for even a second youre jogging all the way up and down the lot basically doing half the work in the whole factory by yourself. you ended up lifting over 80 lbs every 5 seconds. not to mention the thousands of holes in the conveyor belts that would snag your clothes and attempt to suck you in. while just taking the trash out youd have to drive a forklift to a dumpser lift it up and take said dumpseter to a bigger dumpster where then youd have to climb the already on and fully extended forklift just to release a latch to let the trash drop. and its an industrial sized trash can like we are using a forklift here it ways tons and your hands are covered in grease while climbing. no ventalation masks so youre just BREATHING IN MICRO PLASTICS. all while some dumb mother fucker named DAVID( WHOM IVE SEEN LIFT HIS 6 YEAR OLD KID OFF THE GROUND BY HIS NECK SWINGING HIM OUTSIDE CAUSE HE DIDNT MANAGE TO PULL ALL THE WEEDS BEFORE DADDY CAME HOME.) goes around shooting pigeons behind your head who fall into said plastic molding machines!
@bastartx8 күн бұрын
That's not a car bumper
@injectionmoldingskillsmore10646 күн бұрын
Yes, it is the bottom part of the rail on an x4 or x5. Thanks for watching & the support to the channel, I greatly appreciate it.
@WPXTacoMan4778 күн бұрын
Nice roach clip
@injectionmoldingskillsmore10646 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@jayballard99449 күн бұрын
This mold should have been set up vertically, not horizontal. The parts are getting grease all over them , not to mention damage from hitting the tie bars. Poor set up!
@Oliverii8 күн бұрын
China
@injectionmoldingskillsmore10646 күн бұрын
Yes, Thanks for watching & the support to the channel, I greatly appreciate it.
@injectionmoldingskillsmore10646 күн бұрын
We are setting up a robot to pick part thanks. Thanks for watching & the support to the channel, I greatly appreciate it.
@Johnsarabosing12 күн бұрын
HDPE
@injectionmoldingskillsmore106412 күн бұрын
Yes, this is High density polyethylene nice work bud. Thanks for watching & the support to the channel, I greatly appreciate it.
@steveholler561615 күн бұрын
Good use of mold max for cooling the core cap on the moving soda and underside of the lip on the stationary side.
@injectionmoldingskillsmore106413 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@steveholler561615 күн бұрын
Nice work cell layout - dropping the runners into the grinder, separating parts by quadrants, indexing conveyer to move in the next boxes. Great use of automation.
@injectionmoldingskillsmore106413 күн бұрын
Thanks for the tips! Thanks for watching & the support to the channel, I greatly appreciate it.
@steveholler561615 күн бұрын
Eject via fixed rod through the moving platen holes with contact near mold fully open driving the mold ejector plate forward?
@injectionmoldingskillsmore106413 күн бұрын
That is correct, Thanks for watching & the support to the channel, I greatly appreciate it.
@steveholler561615 күн бұрын
Interesting approach vs using nippers on the robot EOAT or in a fixture. Zero gate vestige if the gate is designed properly? Suspect a thin gate and a short land. Thanks for the video.
@injectionmoldingskillsmore106413 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@musokebrian839815 күн бұрын
Hello, how much is that same size
@injectionmoldingskillsmore106415 күн бұрын
They are all different prices for different sizes. Thanks for watching & the support to the channel, I greatly appreciate it.
@musokebrian839815 күн бұрын
Am asking for that EXACT size
@jasonjackson-yl9hk16 күн бұрын
There could be some more efficient movement
@injectionmoldingskillsmore106415 күн бұрын
YES, you are right there could be. Thanks for watching & the support to the channel, I greatly appreciate it.
@ravinath604917 күн бұрын
Sir please explain about HRS and it's Type
@injectionmoldingskillsmore106416 күн бұрын
I am lost on what you are asking about HRS ? Thanks for watching & the support to the channel, I greatly appreciate it.
@ravinath604916 күн бұрын
Whenever we use Hrs and it's function, advantage and disadvantage
@injectionmoldingskillsmore106415 күн бұрын
@@ravinath6049 ok
@MmmmDietCoke17 күн бұрын
Microplastics!
@injectionmoldingskillsmore106416 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@randremehringer17 күн бұрын
Que material trataron de procesar?
@injectionmoldingskillsmore106416 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@Gogonope68718 күн бұрын
Bootleg pop it! XD
@injectionmoldingskillsmore106418 күн бұрын
YES, Thanks for watching & the support to the channel, I greatly appreciate it.
@grombleguy373019 күн бұрын
Should call her.
@injectionmoldingskillsmore106419 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@prosperoantoniohenaorestre533319 күн бұрын
Nooo. Yo ahí mismo quité el dedo. Eso se ve que está muy pesado. Y si me Machuca?
@injectionmoldingskillsmore106419 күн бұрын
Yes, very heavy LOL. Thanks for watching & the support to the channel, I greatly appreciate it.
@louielouiepks19 күн бұрын
Hot pancake
@injectionmoldingskillsmore106419 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@user-hm8pk8xr7q19 күн бұрын
wonderful career dave a lot of experience
@injectionmoldingskillsmore106419 күн бұрын
I have been around the molding world a lot just getting my hands into everything I can. Thanks for watching & the support to the channel, I greatly appreciate it.
@vapormissile20 күн бұрын
SKYNET's mom
@injectionmoldingskillsmore106419 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@user-uc3pr6he1n20 күн бұрын
How did you put a filter on the arm of the robot?? just double sided tape? and how did you remove the filter from robot too?
@injectionmoldingskillsmore106420 күн бұрын
Magnetic screen robot engage mag then disengage mag. Thanks for watching & the support to the channel, I greatly appreciate it.
@javieryanez674720 күн бұрын
Material para q es eso?
@injectionmoldingskillsmore106420 күн бұрын
Is silicone material used for baby stuff, toys, & kitchen stuff. Thanks for watching & the support to the channel, I greatly appreciate it.
@culikova21021 күн бұрын
И что это такое?
@injectionmoldingskillsmore106421 күн бұрын
silicone material mix for parts. Thanks for watching & the support to the channel, I greatly appreciate it.
@user-ip1vl5qq8n21 күн бұрын
Работа мечты
@injectionmoldingskillsmore106421 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@poslovodjeplastika972223 күн бұрын
Hi, really rare to watch a 20 minute video in almost one go.. it was very interesting and you made it that way. I'm in the injection molding field for 10 years now but in the same company and the same surroundings. So much less learning new skills and always working on the same type of presses (Krauss Maffei) but we have a lot of new molds and trials.. as I like to say, the injection molding is like a living thing - it always changes and not a single day is boring. Just too much variables for it to be boring. Also did a lot of training and every year I visit either Fakuma or K-show. Anyway.. it was a pleasure hearing how many companies you have changed and how you moved to places because of it. Hope you will find a company that will use your potential and value you and also you can maybe settle somewhere if that is what you would like.
@injectionmoldingskillsmore106423 күн бұрын
Thanks for watching & the support to the channel, I greatly appreciate it. It is hard sometimes to find the right job out there. I am one that likes to learn new things & help others to grow in the molding industry. One day I will hopefully live by the beach again & do what I like in life & injection molding is my life as well. Thanks again for your support to the channel. Have a great day & a blessed one.
@TheSparks76524 күн бұрын
super inspiring my friend. your videos have helped me a lot in the field.
@injectionmoldingskillsmore106424 күн бұрын
That is a great feeling when someone says I have helped them in some way with my videos. Very humble, Thanks for watching & the support to the channel, I greatly appreciate it.
@JLHoon26 күн бұрын
That’s what we all need.
@injectionmoldingskillsmore106426 күн бұрын
LOL, Thanks for watching & the support to the channel, I greatly appreciate it.
@SuperfanGirl8627 күн бұрын
Isn't it Gallon? You were close
@injectionmoldingskillsmore106426 күн бұрын
Thanks, I need all the help I can get LOL. Thanks for watching & the support to the channel, I greatly appreciate it.
@nowayarte27 күн бұрын
Regrind at 10%
@injectionmoldingskillsmore106427 күн бұрын
Most places are 25% to 50% or so, just depends on the product you are running. Thanks for watching & the support to the channel, I greatly appreciate it.
@Jarbefus88Ай бұрын
Need to preheat the mold so it won't bubble and you don't endure with porosity
@injectionmoldingskillsmore1064Ай бұрын
@@Jarbefus88 yes what we do is we end up remounting it back down for production use anyways but yeah that’s a good idea. Thanks for watching and supporting my channel. I appreciate it.👍
@anandpaul1113Ай бұрын
Thank you so much sir
@injectionmoldingskillsmore1064Ай бұрын
Yes, thanks for watching & I hope enjoyed the content. Thanks for watching & the support to the channel, I greatly appreciate it.
@anandpaul1113Ай бұрын
Relevant information
@injectionmoldingskillsmore1064Ай бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@BadspotАй бұрын
Ready to dump straight into the ocean
@injectionmoldingskillsmore1064Ай бұрын
I hope not!!! Thanks for watching & the support to the channel, I greatly appreciate it.
@kyawmg78Ай бұрын
Giant mold🎉
@injectionmoldingskillsmore1064Ай бұрын
YES, Thanks for watching & the support to the channel, I greatly appreciate it.
@de0509Ай бұрын
Yo wtf. That machine is scary
@injectionmoldingskillsmore1064Ай бұрын
Yes, there are 2 buttons that you use to push in to start & this makes sure your hands are out of the way. Thanks for watching & the support to the channel, I greatly appreciate it.
@thelonewrangler1008Ай бұрын
Its pieces like this that worked fine for decades made out of paper that makes me extremely disappointed every time I'm forced to use a paper straw to save the planet😂
@injectionmoldingskillsmore1064Ай бұрын
Yes, I agree with you 100% LOL. Thanks for watching & the support to the channel, I greatly appreciate it.
@thelonewrangler1008Ай бұрын
Look at all PFAS😂
@injectionmoldingskillsmore1064Ай бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@user-ul5by6bw1mАй бұрын
Абсолютно не тот музон👎🏻👎🏻👎🏻👎🏼
@injectionmoldingskillsmore1064Ай бұрын
Thanks for watching & the support to the channel, I greatly appreciate it.
@seanfarley3Ай бұрын
Thank you Dave. Your help is appreciated
@injectionmoldingskillsmore1064Ай бұрын
Anytime if I can help & Thanks for watching & the support to the channel, I greatly appreciate it.
@mikem6997Ай бұрын
Is that a Cosmo Sheldrake dub over DRE?
@injectionmoldingskillsmore1064Ай бұрын
???? Crazy Thanks for watching & the support to the channel I greatly appreciate it.
@vladimirredsity2171Ай бұрын
С таким усилием он извлекает изделия, это нормально?
@injectionmoldingskillsmore1064Ай бұрын
Thanks for watching & the support to the channel I greatly appreciate it.
@injectionmoldingskillsmore1064Ай бұрын
Yes, the robot moves the parts to a separate storage bins
@parthochakrabarti2298Ай бұрын
They have to go it quickly many times,no wonder they are so fit,ssshhhh don't let the management know they will deduct it from your measly payment😡😡😡
@injectionmoldingskillsmore1064Ай бұрын
Crazy shit!!!! Most companies are a little bit retarred for the way they treat the employees. Thanks for watching & the support to the channel I greatly appreciate it.
@joshbowen2717Ай бұрын
Hey Dave, I'm doing blow molding and have a tool which I have turned the water almost all the way down on and yet I'm still getting condensation inside the mold causing an unwanted texture on the part. It's hot and humid here in VA and I'm battling condensation on all of our tools (injection tools as well) causing rust issues and a giant mess on the floor. Do you have any recommendation on how to cut down on condensation in molding?
@injectionmoldingskillsmore1064Ай бұрын
The condensation problem is an issue that I have had for years & there is no way to prevent it other than Climent control on the plant. I have tried several things for insulator boards and insulators for all the water lines. Cutting the water back or chocking it in half will make the molds run hotter. This did help me on some jobs, but you have to watch for the parts getting too hot and warping. There is NO right answer on this issue it is something a lot of companies fight with. Thanks for watching & the support to the channel I greatly appreciate it. I hope I was able to help in some way.
@joshbowen2717Ай бұрын
@@injectionmoldingskillsmore1064 Thanks man, I appreciate your time. I just hope winter gets here soon lol.
@injectionmoldingskillsmore1064Ай бұрын
LOL, I hear you & thanks for following my channel.
@IIIDAZZLERIIIАй бұрын
Check out the Nissei 70DPH ISBM's 👌👌 we use these
@injectionmoldingskillsmore1064Ай бұрын
I like the Nissei Machines I went to school back in 2000 in Chicago to learn on Nissei American. Thanks for watching & the support to the channel I greatly appreciate it.
@IIIDAZZLERIIIАй бұрын
@@injectionmoldingskillsmore1064 come along way from the 650's......geez the mold changes on those are horrific
@SUNGYUYOONАй бұрын
포크를 분리하여 포장하지 않는것이 더 비싼가격으로 팔 수 있는 방법 같습니다😊😊😊😊😊
@injectionmoldingskillsmore1064Ай бұрын
Thanks for watching & the support to the channel I greatly appreciate it.
@joshbowen2717Ай бұрын
Im going to say A if you want one half of the part too cool at a different rate than the othet half.
@injectionmoldingskillsmore1064Ай бұрын
That is the correct answer great job. Thanks for watching & the support to the channel I greatly appreciate it.
@caucaren435Ай бұрын
All these shorts are so useful. Thank you so much!
@injectionmoldingskillsmore1064Ай бұрын
Thanks, I do have a lot more to put up for everyone to learn from. I don't know everything but I try to give the best answers I can. Thanks for watching & the support to the channel I greatly appreciate it.