Have you tried doing two part molds? Along with preheating you should be able to get more detail than open face moulds.
@TommyBarrett-e6e5 ай бұрын
Could you make me a tiny blue crab graphite 3d mold
@markyu706 ай бұрын
Great big machine! I am making one small kzbin.info/www/bejne/nXeUi2iujLR_qNEsi=1HJs2UsLAvCjJXBs
@movingtorichmondva6 ай бұрын
this is awesome! I'm having fun making copper things from molds i buy on ebay. I would LOVE to buy a mold from you! can i send you a design to make a mold out of? I can venmo you or figure out some other way. I'd like a 3" sphere round mold and some other stuff. let me know!
@jrcouch54366 ай бұрын
How much do you charge for one
@internetmail38887 ай бұрын
Anyone know if it possible to make a graphite mold by mixing graphite powder with clay like when graphite crucibles are made and then taking an impression of a model?
@leahannwhite11118 ай бұрын
Kiri:Moto .. converts 3D Renders into GCode for CNC Machine (CAD File generator?) .. thank you! 👍💓
@leahannwhite11118 ай бұрын
TINKERCAD.. Oh yes.. thanks! 👍💓
@samson433418 ай бұрын
how much to make a 2 sided mold?
@tombouie10 ай бұрын
Thks & I'm considering getting one but a few questions; 1. ?Could you compare the original lowrider, lowrider2 vs lowrider3 for me? 2. ?What do you think fo trying unistrut rails under your lowrider wheels? Unistrut rollforming machine (41x41) (41x21) JUGMUGrollforming. kzbin.info/www/bejne/eKfFq5Z8YpiSebs Unistrut Channel Selection Video | Unistrut Buffalo Supports | a division of Eberl Iron Works, Inc. kzbin.info/www/bejne/oKLWeWmbabqEa5Y Unistrut: The Sky's the Limit, Disney (?back to the future?) kzbin.info/www/bejne/jnWpio1jnZaoa5Y
@jimdotdev11 ай бұрын
I too, have too many hobbies. Have you stuck with the lr2? Coming back to mine all you see now is the lr3. I like being able to undo two belts and getting it off a table.
@sarvizer68gmailhebrewiam11 ай бұрын
Nice
@Fenster134 Жыл бұрын
Looks nice. I'm currently starting to build something like this.
@DamageInc86 Жыл бұрын
Could someone commision you to make some molds of stuff found on thingiverse?
@aleavaca9340 Жыл бұрын
hi! can u share the intro video?
@the4hunters Жыл бұрын
True genius l
@danielwdunn Жыл бұрын
Nice! Have you considered upgrading to the Lowrider v3?
@rammods Жыл бұрын
Where did you find the clips?
@TooManyHobbies786 Жыл бұрын
There is a place here called Lee Valley tools that sells them. Not sure if Amazon carries them...
@somethewiser Жыл бұрын
Hi, great video! The "panel clips" right around the 3:00 mark, where might I find these? Thanks!
@imonnights Жыл бұрын
Hi, Awesome video bro!! Ty for sharing 👍 Is there any chance you can add the links of the sites you're using and where you got the CnC machine for Us All in the Description Thank you for your time 👍👍👍👍👍
@Dimrain13 Жыл бұрын
You have a link for the plans you showed? I want to scale everything up a bit.
@degoschannel9564 Жыл бұрын
How much do you lose by re-melting down the silver mess-ups?
@cosamuel7182 Жыл бұрын
Most excellent. Found that thread yesterday and was thinking how great it would be to get a demo of that setup. Thanks for demoing for us and adding your tips and experiences.
@renegroulx7029 Жыл бұрын
engraving machine
@yes4527 Жыл бұрын
Metal casting for small object doesnt give good result
@georgefares5175 Жыл бұрын
I know this is an old video, but what cnc machine did you get from ali?
@TooManyHobbies786 Жыл бұрын
Its been a loong time but I think it was just a generic 3018 cnc with the 775 spindle. it ran grbl and was pretty fun for its size.
@a2zsendcasting971 Жыл бұрын
Very good very good very very nice
@mustaphaben29212 жыл бұрын
Is it possible to do the same table in full sheet size?
@TooManyHobbies7862 жыл бұрын
absolutely--the size is only restricted by your imagination :) and space of course...
@mustaphaben29212 жыл бұрын
@@TooManyHobbies786 I think the problem is with the length of sawhorse not enough for full sheet table (1.5m) is required
@djVania082 жыл бұрын
Any updates on that? How is it running? What is the max material thickness? :)
@TooManyHobbies7862 жыл бұрын
I had an issue with the spindle mount (the PLA softened and the router slipped due to heat)--I have re-designed that part since then. Unfortunately I had to take it down to make room in the garage for awhile :( It should cut a few inches (depends on the bit used) but I have about 4" of travel or so in the z-axis.
@saltydecimator2 жыл бұрын
Neat! So the electric furnace heated the 22 brass no problem? I wanna build a bell but that’s gonna take a bit lolz
@matthewcamargo30522 жыл бұрын
Can you make a deep cad mold for me? I can send you photos of what I want. Thank you. Kind Regards, Matthew C.
@auxchar2 жыл бұрын
Based Thinkpad user
@ady7d772 жыл бұрын
now in this 2022 when youtubers do or make something, they have their links from the material they are using in the tutorials and how can we get them, greetings from mexico, it is a must
@MrMISTERFREAK2 жыл бұрын
if you want clear cast before you put silver just put candle in the mold and after that put silver.
@design8studio2 жыл бұрын
Great job!
@iamvonimmel2 жыл бұрын
What bit did you use?
@TooManyHobbies7862 жыл бұрын
1/8" 20 degree v-bit (basically a tiny engraving bit) to do it again, I would rough with a 1/8" single flute, then fine detail with the engraving bit.
@neilphillips31932 жыл бұрын
Awesome build. I got here following a link on your V1 forum build. I’m building an LR3, and saw this, and the original design and think it looks great, very functional. I do have a question though- why not utilize the 2x4 cutouts in the sawhorses and make a table without the additional cradle? You could flip it 90 degrees and offset the rails vertically to clear the sawhorses, then build with the furniture clips and removable torsion boxes. I only ask because I just bought 2 of the same sawhorses for a different project and immediately saw how I could use them for an LR3 table. Looking forward to seeing more LR2 videos!
@stevenreynolds25802 жыл бұрын
had same trouble getting wheels what adjustments are needed for 72mm wheels ? Thanks Steve
@TooManyHobbies7862 жыл бұрын
I had to put small (5mm or so) brass spacers between the wheel and the Y-carriage so that the wheels would clear the bolts. Other than that nothing else..
@lakesidebc2 жыл бұрын
Great project, thanks for sharing with us.
@bunkie21002 жыл бұрын
Very interesting. I've been planning something vaguely similar. In my case, I want to use my workbench as the platform. I've been planning a set of removable rails similar to your box beams that would mount on either side of the long axis of the bench. I had been wondering about how to engineer the rails, your box beams are a great idea.
@DIYdoofus2 жыл бұрын
The v3 on the MPCNC website uses rails. I’m sure the schematics and purchasable kit will help you out.
@jimhinkle72452 жыл бұрын
I'm getting ready to build one myself. Any tips or anything you'd do different?
@TooManyHobbies7862 жыл бұрын
Nothing profoundly different no--Alignment and squaring are the biggest things to get right and the V-slot rails are a must in my opinion--single best thing to keep the gantry parallel even after installing dual Y-end stops.
@jorgequintero56832 жыл бұрын
Hello, greetings from Colombia, thank you very much for sharing the process; I'll try to do it.
@rickstrodder1292 жыл бұрын
Thanks for this film. I was wondering... did you do some upgrades on your cnc for the motor mount?
@Tysto2 жыл бұрын
This is why coins are stamped, not cast.
@noone-lb1jj2 жыл бұрын
How much do you charge for custom moulds? Please contact me!!!
@RockyMountainBear2 жыл бұрын
Cool! Lucky basterd. I do all my graphite molds by hand. I *really* gotta get me a cnc machine.
@nealmalega53092 жыл бұрын
could I pay you to make a coin mold of my choice??
@magnuswootton61812 жыл бұрын
do these graphite moulds take pressure- or do they powderize under pressure?
@bserieshatch12 жыл бұрын
Do you make custom molds for sale? If so how do I contact you?
@imadieselassninja2 жыл бұрын
Can you tell me your setting, feed rate, etc. Would be a big help bud.