Dave's AutoDIY

Пікірлер

@Emilywilson-s3f 7 күн бұрын

I think I had that same problem on my Kia Sorento

@user-y5z-g3p 7 күн бұрын

So did I lol

@autodiy1 7 күн бұрын

Yes, it’s a common problem

@condejesuit 15 күн бұрын

Great video!

@autodiy1 15 күн бұрын

Glad you enjoyed it!

@braydenhee1774 22 күн бұрын

Thank you!

@autodiy1 21 күн бұрын

You're welcome! Thanks for watching.

@soriano3361 23 күн бұрын

Anti seize on the studs messes up torque readings.

@autodiy1 23 күн бұрын

I never considered that. What do you do? Just do them dry, or do you torque higher? I’ve never had an issue (yet) using antiseize and about 85-90 ft-lbs.

@soriano3361 23 күн бұрын

@@autodiy1 TTQ tested out what happens when you use anti seize on studs. It basically doubles the torque value, so you may be torquing them down to as high as 180 ft/lbs which could put excessive strain on the studs. I toque em dry even here in the salt belt. If you are rotating your tires every 5-6k you really shouldn't have any issues with them getting stuck. Here is the TTQ vid kzbin.info/www/bejne/Y5m2nqeCi6qGia8si=i-pD0t9VPbnUSa0b&t=999

@autodiy1 22 күн бұрын

@soriano3361 Thanks for the tip. That is a huge difference. I think I’ll stop using antiseize on wheel studs.

@jaguar7051 25 күн бұрын

Look you performing the job of a very high-class Engineer? What University did you complete?

@autodiy1 25 күн бұрын

U of Toronto. Go SKULE!

@SakibAhsanTamim Ай бұрын

Hello, "Dave's AutoDIY" I saw your channel and saw that in your channel have some problems, not many. For these problems your channel is not growing. If you can solve these problems, Your channel will grow like a storm. Do you want to know these problem? If you Want to know, I can only tell to you. Can I tell here or email?

@autodiy1 29 күн бұрын

Thanks Sakib, but I think I’ll figure things out on my own.

@filmgunproductions4448 Ай бұрын

These are all on point, I want almost everything you recommended, definitely sending this to some people 🤙

@autodiy1 Ай бұрын

Fantastic. Hopefully something here shows up under your tree this year.

@sarahwilson2671 Ай бұрын

Nice hat

@MinonKei Ай бұрын

Great videos on the thunder . Keep up the fine work. (90 Mariner blue)

@autodiy1 Ай бұрын

Thanks for the support. Hold on to that blue 1990. Don’t see too many of those anymore.

@wils_builds Ай бұрын

Very thorough guide. I did mine recently. I found it best to just replace the soft and hard line and directly connect the slave and master

@wils_builds Ай бұрын

Nice install dude! I was thinking of doing these instead of replacing the whole bushing

@autodiy1 Ай бұрын

Thanks for the feedback. I’m working on the suspension bushings now, and it is a real pain in the neck. I’m glad I went the insert route for the diff.

@autodiy1 Ай бұрын

Btw, your video came in handy for the suspension bushings job, so thanks!

@kalani1987 Ай бұрын

You really need to completely purge the air out. Let the fan switch on a couple of times with the heater on Hot. Also use a spill proof funnel for this

@sarahwilson2671 2 ай бұрын

Really helpful I want to install now

@autodiy1 2 ай бұрын

Go for it!

@user-y5z-g3p 2 ай бұрын

That wrench is such a good idea! Thanks!

@autodiy1 2 ай бұрын

Glad you like it!

@RisenGlorfindel 2 ай бұрын

Just installed mine and I can definitely hear more of a growl under load. I can’t really feel any more performance but it makes my 1.8L sound much better. In my opinion, this is the best air intake option on the market.

@autodiy1 2 ай бұрын

Congratulations. I agree. Such a simple design, but it works.

@ffhjvbuydb78eb 2 ай бұрын

why woul dyou fil it up with gas? by the time spring rolls around your gas will be old. also with washing it whats the point? it sits in storage and gets dusty. I know, i keep 3 of my others cars in storage during winter

@autodiy1 2 ай бұрын

I put in fuel stabilizer to prevent the gas from getting old. A full tank has less air space, and therefore less condensation risk as it goes through temperature cycles all winter. Washing gets rid of bugs, leaves, oil, etc, but you are right that it gets dusty (unless covered), so needs another wash in the spring anyway.

@pt008 2 ай бұрын

You can overinflate your tires (stay under max pressure per sidewall) for storage, to help minimize flatspotting.

@autodiy1 2 ай бұрын

Very true. I had intended to mention that option, but when I finished editing I realized I left that out.

@dcdad556 3 ай бұрын

Sorry. Cutting holes in the firewall ain't ain't bolt on. But, I like it.

@autodiy1 3 ай бұрын

You’re right. But every hp helps.

@cdaly101 3 ай бұрын

Just installed mine. K&N air filter will give you more noise and better airflow.

@autodiy1 3 ай бұрын

I think you'll like it. I also have a K&N filter, and I agree it is a good match.

@slackularo 3 ай бұрын

Getting a clean hole in that firewall isn't easy for anyone.

@autodiy1 3 ай бұрын

Glad to hear I’m not the only one!

@user-y5z-g3p 4 ай бұрын

great tips!

@autodiy1 4 ай бұрын

Thanks. Hope it helps.

@sarahwilson2671 4 ай бұрын

great job bro!

@user-y5z-g3p 4 ай бұрын

yes

@autodiy1 4 ай бұрын

Appreciate it!

@user-y5z-g3p 4 ай бұрын

This is your best video yet! And thanks for the pro tip

@autodiy1 4 ай бұрын

No problem!

@MattHolloway-r8h 5 ай бұрын

Well done! Probably could have replaced the blinker fluid while you had it all open…

@sarahwilson2671 5 ай бұрын

amazing that is so helpful 😄

@user-y5z-g3p 5 ай бұрын

I love your content!

@user-y5z-g3p 5 ай бұрын

Thanks, this is really helpful!

@autodiy1 5 ай бұрын

Glad to hear it!

Ең жақсы KZbin

Пікірлер