YakGear

Пікірлер

@RobertoX-ro8sv 10 күн бұрын

How unfortunate that there's no mention of the advantages/disadvantages of the TYPES of leashes. Therefore, this video was of no use to me.

@exploitxterme 16 күн бұрын

Loo

@user-ut5hk1kl9l 2 ай бұрын

Just so you know.......pulleys on boats are called blocks, not pulleys. And rope is called line. Thought you might like to know considering that your whole business is about selling marine/freshwater products.

@michaelmorski1859 2 ай бұрын

Has any used this on a Sportspal or Radison type aluminum canoe.

@Machria23 4 ай бұрын

These are a great idea, BUT, they are not robust enough. Mounted on an 2023 Outback, they rod holder in a Miniport barely hangs on. 1st problem is the metal tabs that slide into the tracks are waaaaay to small. The miniport comes right off the track if you bump it or the rod/rod holder. Not enough purchase on the tracks. These need to be beefed up a bit man.

@JLP_710 4 ай бұрын

Rivet tool is probably about $20 in bidens economy

@rumdab 5 ай бұрын

For 36 dollars, you would think the measurements would be right, but it gets progressively worse after the 6 inch mark... The numbers have to be highlighted by a sharpie they give you as well, or you can't see it that well 🙄

@Jackofalltrades83 6 ай бұрын

What size are the rivets? I know you say they came standard in your kit, but mine didn’t have those and I’d like to install them into my kayak because I have no access to the inside of it for screws. Thanks!

@nancyhainline2517 7 ай бұрын

How much do these cost?

@hkalsi2136 8 ай бұрын

Very good explanation and demo. Keep it going.

@rumdab 8 ай бұрын

After about the 17 inch mark the measurements are off by an inch

@FlatEric-c3k 8 ай бұрын

Anybody out there know if these work well for sea going stability on a OT big water 13.2? It's a heavy kayak and I am not sure if the floats are bit on the underpowered side. Would how the the side arms are attached stand up for to flexing on the RB inserts? Sure look like they are fine on lighter kayaks/lake use, but I would love to hear if anybody has salty experience on a heavy yak?

@-a-strikelures1212 Жыл бұрын

Why do you not respond to potential customers questions!?

@pat5221rick Жыл бұрын

This looks like a piece of shit compared to the yak attack version

@brianmacelroy636 Жыл бұрын

how do you open the hatch after installing cord ?

@proximap2151 Жыл бұрын

Damn I just used silicone on the well nuts..

@johnnypea43 Жыл бұрын

@ :37 you can see that the rod is actually resting on the bottom, NOT floating. C'mon. Yak Gear... your brand makes some excellent products, these are not one of them.

@OLDHATOUTDOORS Жыл бұрын

Any video of this blind in action? What about when temps are below freezing and doors get wet?

@LovingIdaho Жыл бұрын

cut zip tie in half to make sure it breaks for you . I have lost 4 of these anchors. I switched to mushroom anchor the same weight and have not got it stuck in years .

@jasonmilmoe4893 Жыл бұрын

Q: what is the benefit of angling the pad eyes as opposed to just straight up & down?

@KineticSenseTherapies Жыл бұрын

Thank you!

@treymurphy6398 Жыл бұрын

My kit didn't come with rivets :(

@christophertonns1936 Жыл бұрын

I just installed another @yakgear #yakgear anchor trolley on my 2nd kayak. This video should be the template for "how to install your ABC or 123" anything. The enclosed pulley is superior to other products I evaluated. Great product, great video. No fluff, no filler, no upbeat rock music, not needed, just good info.

@CastScratchFever Жыл бұрын

Does anyone know how these hold up on a canoe ? Are they worth it ? Looking to make my fishing canoe safer

@robbot9877 Жыл бұрын

there is no way they are strong enough to not just rip the well nuts out with any decent wave.

@TheHemdawgy72 2 жыл бұрын

How to tell it’s perfectly parallel, eye ball it real good

@moretackle1 2 жыл бұрын

Nice instructional video but I am concerned that there is no emergency quick release.

@edgardolugo749 2 жыл бұрын

Hello can you send a video how to install them in the front???

@rwdtk000000 2 жыл бұрын

This was not even close to mounting on my h track on my hobie compass. There are no tutorials

@highplainsoutdoorsman4566 2 жыл бұрын

Did you ever get it brushed up?

@alexbogdan117 2 жыл бұрын

WHAT SONG IS THIS? I can't stop playing it in my head perfect banjo

@ryanjustman9169 2 жыл бұрын

Why are the doors so huge and floppy.. Need a redesign. Once they get wet your screwed.

@marydeemock101 2 жыл бұрын

Thank you for this instructional video. My paddle clip came without installation instructions, but your video made installation very easy. One thing I did wrong!...I tried to push the rubber well plugs in the hole before adding the bolt thru the paddle clip - AND THE PLUG WENT RIGHT THRU - lost forever inside the hull!! 🙁 Yikes - lesson learned.

@NA-sb7xz 2 жыл бұрын

Will these install on a Scotty low profile track? Those came on my pelican rebel 100xp and I'm wondering if I could install these on them

@stormie575 2 жыл бұрын

Which size well nuts should I get for these standard applications?

@ax5017 2 жыл бұрын

How much flex this will do on the body of the kayak. I'm afraid it will crack the kayak😬

@donnyj1 2 жыл бұрын

I know this is an old video, but I have not had any luck finding a rivet gun that will fit inside the cleats to rivet the cleat to the kayak. Any idea or link to purchase?

@conan950 Жыл бұрын

Use a couple washers/nuts between the rivet and the gun to fill the empty space

@American-Plague Жыл бұрын

@conan950 Isn't that going to leave a spike of metal protruding from the rivet instead of cutting it flush, IF it even pulls the rivet correctly to begin with?

@iklink 2 жыл бұрын

I need track mounted please. I don't want to drill any holes. Please advise

@brookskelty3832 2 жыл бұрын

Got the exact same kit. Didn’t come with screws and lock nuts nor did it come with tri grip rivets, wish I knew that instead of buying a rivet gun kit based off of this video. Still a helpful video and seemingly nice anchor trolley, just wish it came with what I expected from this video.

@SouthFloridaFishingClub 2 жыл бұрын

What are the pros and cons of running this setup in the front vs the middle or closer to the rear? Have an Ascend 133X for fishing that I’m considering a set of this to add extra stability and for light offshore days. I have a bow mounted trolling motor and I feel the front could use some extra stability but don’t want to loose casting area.

@JonOvalle Жыл бұрын

I second this question. The lack of a response make me question if they just want us to buy the front and back mounts (whichever is not on). Idk, but I would like a nice answer to this question. My thought have also been around the weight distribution of the kayak

@TacoOperator Жыл бұрын

Did you ever add them to your Ascend? It's the same model I have

@strnto8967 2 жыл бұрын

Where can I purchase the 9 foot stick. Cant seem to find it on the website

@scottballesteros8366 2 жыл бұрын

Great video. I can't wait for more fishing pointers. Go fishing....

@firepup35 2 жыл бұрын

My kit didn't come with the rivets?

@xxBowman1 2 жыл бұрын

What makes it better than the Cabelas Northern Flight Kayak blind?

@highplainsoutdoorsman4566 2 жыл бұрын

I believe the Northern Flight blind is made mostly to fit the Ascend 12' kayaks and maybe you can get it to fit over other 12' yaks. This blind is kind of a fits all for kayaks and canoes from 12-14'

@xxBowman1 2 жыл бұрын

High Plains Outdoorsman Thanks for the reply! Do you think the YakGear would fit on 10ft kayaks or would it be too big?

@highplainsoutdoorsman4566 2 жыл бұрын

@@xxBowman1 I would guess that it's too long. You always try some sew work or something with it. IMO I would either use an old layout blind or a concealment blanket, or netting to cover a 10'

@roy-nk4vq 2 жыл бұрын

They don't look very long

@c4chris177 2 жыл бұрын

Whats securing the screws to the plastic? Could just pull that off

@dudewheresmycar8506 2 жыл бұрын

When will you guys be releasing more content? More products? This channel has so much potential & y’all are slacking. Let’s get to it, don’t tell me covid is making it difficult for you.

@pa_maj.MARTINI-van-MAN 3 жыл бұрын

Without a plate underneath the side deck and SS bolts fitted/bolted through I wouldn't trust these to not work there way out, actually better too with a full width brace for extra strength. You had a lined out floor with what looks like vinyl floor covering, I'd have lined the bow and stern with that then the outriggers with the lines also: I'm sure most houses or yards have some sort of lined/paved/decked floor to work off to line things up properly rather than by eye alone. Anyway, the floats themselves seem fine.

@MolsonFLA 3 жыл бұрын

Too bad they are never available for purchase.

@Yakgearinc 3 жыл бұрын

They will be back in stock very soon! Make sure you follow us here for updates instagram.com/yakgear/ facebook.com/YakGearInc twitter.com/yakgear

@PossumsTophat 3 жыл бұрын

It looks like the doors would flop down into the water when you swing them open to shoot. Then you would have wet fabric laying on top of you. Does this happen?

@jerronwosel818 3 жыл бұрын

It would if you are hunting open water. If you're tucked up against a shoreline, more than likely you are dealing with far less water depth and should not have that big of an issue. Not to mention if you are tight to cover, the surrounding vegetation or brush would keep the doors from flopping all the way down. Not saying it wouldn't happen still, but it would reduce the amount of water brought up onto you. Plus, you could always hold the doors at an angle and let all excess water run off of them before closing again.

Ең жақсы KZbin

Пікірлер