The Rusty Roller

Пікірлер

@kara9664 Ай бұрын

Finally some supervision,lol

@therustyroller3049 Ай бұрын

@@kara9664 Yeah I probably need it.

@kentieber7309 Ай бұрын

deal with the wires and make it look good and accurate

@therustyroller3049 Ай бұрын

Yeah That's what I was thinking too.

@rickm5806 2 ай бұрын

Looking good. I like your simplistic approach. Me.... I tend to overthink it. I guess thats why my Studebaker Rat Truck is still unfinished.

@therustyroller3049 2 ай бұрын

Thanks.I definitely overthink things too.Sometimes spend hours visualizing stuff and moving stuff around.Just gotta shut your brain off and go for it.

@michaelmasciarelli9869 5 ай бұрын

Thanks for the video, it helps a lot to watch someone actually do it other than just reading about how to install windows. I will be installing new windows in my 51 Ford F-1 in the near future. This helped for sure.

@therustyroller3049 5 ай бұрын

No problem.I'm the same way.I'd rather see something done than just having it explained.Glad it helped and good luck on yours.

@Plottman 5 ай бұрын

Looks good......are you on Facebook?

@therustyroller3049 5 ай бұрын

Thanks.Nate's Customsigns.Havent posted much on there in awhile.

@rodrigorodriguez5288 7 ай бұрын

Any videos of the actual engine swap? I have a 48 f1 , planning an 5.3 swap

@therustyroller3049 7 ай бұрын

No videos of it.I boxed the frame rails and then set it back as far as I could.Made some mounts from 3/16 plate while it was hanging from the hoist.Had to use the f body oil pan since It's got the mustang 2 suspension.Also gonna need block hugger headers.

@abdelhassand 8 ай бұрын

Which specific wiring harness did you use

@therustyroller3049 8 ай бұрын

Psi.Had to buy adapters for the injectors because they were a different style but no problems with it so far.

@petercarrillo5095 8 ай бұрын

It looks AWESOME! I'm looking into a 49 F2 right now. I'm a Chevy guy, but I'm getting a good deal on it. And I would like to go like you're going. That old patina road race, track style truck. Love your truck it's awesome!! "Inspiration is needed to continue on". Thanks buddy.

@therustyroller3049 8 ай бұрын

Thanks.I'm more of a Chevy guy too but I think these older Ford's were some of the best looking body styles.Pull the trigger on that 49 man.Once you start making progress on it you'll be glad you did.

@HappyHeartKustoms 8 ай бұрын

gonna be an awesome build

@therustyroller3049 8 ай бұрын

Yeah if I ever get it done.No insulation in the shop so progress is really starting to slow down.

@HappyHeartKustoms 8 ай бұрын

I feel your pain there! Same here

@Freeman-eo2lx 8 ай бұрын

They needed the roof for a project or a sled

@therustyroller3049 8 ай бұрын

Lol yeah I can see using it as a sled.

@markstack2309 9 ай бұрын

I found a 46 in really great shape good to see someone else doing one up

@therustyroller3049 9 ай бұрын

Yeah it's pretty rare to find one in decent shape around here.What are your plans for the 46?

@markstack2309 9 ай бұрын

@@therustyroller3049 street maybe a rat not sure the place has my 34 international pu way to kool plus many other deliveries ford chevy etc. All with excellent metal. Probably 1 with ls supercharged . Just something to roll around being different.

@markstack2309 9 ай бұрын

Just where bouts are you I'm down here in ne Georgia

@therustyroller3049 9 ай бұрын

@@markstack2309 southeastern Missouri out in the boonies.Nice area, just close to anything.

@therustyroller3049 9 ай бұрын

Not close I meant

@thebeardedone1225 9 ай бұрын

Love those old panel trucks. Looking good.

@therustyroller3049 9 ай бұрын

Same here.Sucks they're getting harder to find though.Thanks.

@rustedjunkgarage3316 9 ай бұрын

Nicely done , 🫵🏼💯🆒

@therustyroller3049 9 ай бұрын

Thanks

@Wagoneerland 10 ай бұрын

Couple questions. What front suspension and what oil pan. Ive got a 50 with a M2 front suspension and my oil pan is going to be below the rack and pinion.

@therustyroller3049 10 ай бұрын

Got the mk2 kit from speedway that came with the springs and shocks.Think they're speedway brand.Had to get an F body oil pan.

@mrhamburger6936 10 ай бұрын

When I worked at a dealership back in 1970s there was a guy that use this technique replace window he used clothes line rope I don't know if you can get that stuff anymore

@therustyroller3049 10 ай бұрын

Not sure.Probably just about any rope that size would work.

@kara9664 10 ай бұрын

Cool video 😊

@therustyroller3049 10 ай бұрын

Thanks

@rustedjunkgarage3316 11 ай бұрын

Great job, building on a budget, even using flux core wire. Nicely done. 🫵🏼💯🆒🇺🇸

@therustyroller3049 11 ай бұрын

Thanks.Some of the welds looked a little rough but it'll hold.I hope lol

@rahulyeram189 11 ай бұрын

🤘 looks really good

@therustyroller3049 11 ай бұрын

Thanks.

@laroark5036 11 ай бұрын

You stole those seats for $40 .

@therustyroller3049 11 ай бұрын

Sure did.Dont find deals like that very often.

@chris-the-bodge-sculptor 11 ай бұрын

Thanks very interesting

@therustyroller3049 11 ай бұрын

No problem.Thanks for watching.

@rustedjunkgarage3316 11 ай бұрын

Nicely done, I remember doing the rear window in my 51 GMC with the lock strip, what a pain, I was liking the rope install tool . 🫵🏼💯🆒🇺🇸

@therustyroller3049 11 ай бұрын

Thanks.Got lucky it was a small window and no lock strip,made it a lot easier.

@vipersniper843 Жыл бұрын

Subbed , it's got a ls 👌👍

@therustyroller3049 11 ай бұрын

Thanks.Its my first one but won't be the last.

@adventureswithedna Жыл бұрын

Initially I had one on Edna that was a piece of channel welded to the frame. I eventually went with a stock chrome bumper and cut out the old one. Also went with the bumper tuck brackets to keep it close to the frame. I have a video on my channel about it. Great 48 you got there! Edna is a 50

@therustyroller3049 Жыл бұрын

Thanks.Yeah I kinda just slapped it together and didn't put much thought into it.I'll probably end up doing something different with it later down the road.

@adventureswithedna Жыл бұрын

@@therustyroller3049 it looks cool. I like it

@therustyroller3049 Жыл бұрын

@@adventureswithedna Thanks, appreciate it

@Ruststored Жыл бұрын

Good video. I'm not into LS (at least not yet) but knowledge is a good thing.

@therustyroller3049 Жыл бұрын

Thanks.Yeah this is my first Ls so I'm still learning.Definitely won't be the last.

@rustedjunkgarage3316 Жыл бұрын

Great build on a budget, the bed looks cool, nicely done 💯🆒

@therustyroller3049 Жыл бұрын

Thanks.It actually ended up costing a lot more than I planned on but that's usually how it goes.

@rustedjunkgarage3316 Жыл бұрын

That’s normally the way Hot Rod builds go. 🫵🏼💯🆒🇺🇸

@rustedjunkgarage3316 Жыл бұрын

Great video, enjoyed watching 🫵🏼💯🆒🇺🇸New Sub for you.

@JasonConger-nd9gp Жыл бұрын

Getting it there dude. Starting to get it tweaked more and more. I remember helping you unload that truck off the trailer in nothing but pieces

@therustyroller3049 Жыл бұрын

Yeah that's been awhile.You need to come down and take a ride in it sometime.

@johnsargeant2041 Жыл бұрын

Sick truck buddy, I was blessed enough to have had a 48 too.. I went alittle different rough with mine.. but made good money on and everyone enjoyed it.

@therustyroller3049 Жыл бұрын

Thanks.Probably about the best looking truck Ford made in my opinion.

@johnsargeant2041 Жыл бұрын

I agree... I'm working on a 64 step side now, 7inch of body drop down on a 99 crown vic classie.. I didn't start it I picked it up after the body wax set on the frame.. buy it will turn out nice for what it is..

@therustyroller3049 Жыл бұрын

Nice.That body style looks good lowered.Post some pics when you get it done.

@MississippiDan1 Жыл бұрын

Nice truck! Can't wait to see it rolling

@therustyroller3049 Жыл бұрын

Thanks.It is drivable but still some more bugs to work out

@laroark5036 Жыл бұрын

I've done some pigeon poop welds too .

@therustyroller3049 Жыл бұрын

As long as they hold together.

@StruggleandStrive Жыл бұрын

Hell yeah man it looks good. I like the snek. Nice job on the editing too!

@therustyroller3049 Жыл бұрын

Thanks man.Sometimes the editing takes longer than the work itself but it's worth it.

@StruggleandStrive Жыл бұрын

@therustyroller3049 Yeah, that's the downside but it does get easier.

@MikhailScottKy Жыл бұрын

Looking at the door it is not that bad. Look up Iron Trap Garage as they have several step by step vids showing door rebuilds and fabrication.

@therustyroller3049 Жыл бұрын

Just didn't want to spend the time on it.I might later down the road if I don't find another one.Thanks for the tip I'll check em out.

@ragnew7411 Жыл бұрын

Sunroof over a bed

@therustyroller3049 Жыл бұрын

Lol yeah maybe.Not something I would've done now I'm stuck fixing it.

@stevearroyo9076 Жыл бұрын

I have a '49 KB2 all restored. Its a fun truck and gets a lot of looks. Only draw back to it is how slow it is. 40-45mph is where it's most comfortable. So at the very least doing a rear end swap would be advisable. I know a guy who has TT loads of parts for these trucks. He's in Missouri. Message me back if your interested in his contact info. I look forward to more episodes. I know you will get 'er running. These green diamonds were virtually indestructible! I won't take much to revive it!

@therustyroller3049 Жыл бұрын

Thanks for watching.I decided to do a chassis swap with a 91 Dakota so I'm not going any farther with the original engine.The video after this is where I tear apart the Dakota, check it out.Yeah that contact info would be great.Dont know how to pm through KZbin.

@kara9664 Жыл бұрын

Keep up the destruction, lol!

@therustyroller3049 Жыл бұрын

I plan on it.

@rustynutz7158 Жыл бұрын

Thanks

@therustyroller3049 Жыл бұрын

No problem

@StruggleandStrive Жыл бұрын

Nice T-shirt! Lol hope your paying your helper. This is exactly what i have planned for the old ford. Just looking for the right doner truck.

@therustyroller3049 Жыл бұрын

Hey I really miss that place.She gets paid in ice cream but she keeps demanding more.Ls it

@StruggleandStrive Жыл бұрын

@therustyroller3049 they always demand more. Good employees are hard to find these days lol. If it wasn't my brothers truck that passed I would but he was one of those true blue Ford nuts so I'm going to keep it ford and just work on it all the time!

@StruggleandStrive Жыл бұрын

First off the beard is starting to look on point! You have a welder.. just zip it back together. I would of used more starting fluid!

@therustyroller3049 Жыл бұрын

Thanks, been putting a lot hours into this beard.Just one more squirt it probably would've started lol

@StruggleandStrive Жыл бұрын

Oof that was stupid...lmao my back hurts for you! Good to see the old tractor putting in work. This is a badass project!

@therustyroller3049 Жыл бұрын

Yeah the tractor is a life saver, obviously should've used it on that front clip.

@MinnesotaisRust Жыл бұрын

Looking forward to following this build!

@therustyroller3049 Жыл бұрын

Thanks for watching

@thecollectoronthecorner7061 Жыл бұрын

Just liked and subscribed. We have a 48 bob truck in our hoard. I has a good cab glass and doors.

@therustyroller3049 Жыл бұрын

Awesome, thanks for watching.What do you plan on doing with it?

@billchristopher8892 Жыл бұрын

Looking forward to watching the progress

@therustyroller3049 Жыл бұрын

Thanks for watching

@williamsullivan7635 Жыл бұрын

Now that is awesome just awesome what a frickin cool piece of machinery man 😁 have fun restoring this awesome truck!

@therustyroller3049 Жыл бұрын

Thanks.I wouldn't say I'm restoring it, just turning it into a rat rod.Thanks for watching

@jameswilson2975 Жыл бұрын

The patina is great… nice build.

@therustyroller3049 Жыл бұрын

Thanks.Still need to finish it up if I can peel myself away from the panel truck.

@jameswilson2975 Жыл бұрын

My dad and I just pulled a 48 kb2 from is 65 year parking spot. We’re going to be swapping it to a 96 dakota chassis. It was also the first time my daughter went to the farm with us willingly. The Dakota frame sits high in the back. We looked at a Crown Vic front suspension and explorer 8.8 rearend on the original frame as another option. I’m excited to see more.

@therustyroller3049 Жыл бұрын

That's awesome.I've heard of guys doing the crown Vic front end but I figured I'd just do everything in one big package deal with the Dakota.No worries about driveshaft or anything else lining up.Let me know how yours goes.Thanks for watching.