Okay everyone, this is going to sound crazy but it made mine work. Take the batteries out leave them out for one minute. Put them back in and PUT THE THERMOSTAT IN THE FRIDGE. I put mine in for 26 mins. Then put it back on the wall with the switch on heat. Wait a few mins. And voila. Tip: bypass the settings by pushing hold once. The hold will appear on the right of the temperature. This button makes it manually. Cut the heater on and off as you please. The Logic: I watched countless videos and read at least 10 articles and platforms discussing this annoying thermostat and I notice two things. 1. My thermostat kept saying it was hotter that it was in my house and 2. when I turn on the air it said cool on and when I turned on the heat it said nothing. In all the videos I watched when they cut on the heat successfully it said “heat on”. So I knew that needed to be showing. In one of the articles I read it said you may turn the heat on but the “heat on” does not display because your thermostat thinks it’s hotter than the desired temperature. So while the thermostat is on, it’s in stand by. This gave me the idea to trick the thermostat in thinking it was cooler so I put it in the fridge. I really hope this works for someone.

Niets op het display te zien ook niet na het vervangen van de batterijen.

Doesn't work!

Quick question: in my new home I have a T87RF thermostat, which is connected to a BDR91 receiver for controlling the floor heating system. The thermostat is properly connected to the receiver (I can see the Wifi-like icon on the display of the thermostat). However, the leds of the receiver are as follows, even if I putting the desired temperature on the thermostat to 0 degrees: - Green led: always on - Red led: blinking What does it mean?

I hate this thermastat also

Dankjewel voor deze korte en heldere video. De gebruiksaanwijzing laat te wensen over in deze.

Ridiculous

My question relates to T4R stat

How can I change settings to allow me to set different times/ temps for each of 7 days? The only option I have is MON:FRI and SAT:SUN but the library opening times vary day to day.

15 graden in mijn huis, geen idee hoe dit te veranderen, ik kan niet voorbij de 15 graden draaien, dus hoger, geen knoppen, waardeloos ding...

Niks werkt zoals hierboven

En wat te doen als het middelste lampje niet gaat knipperen nadat ik op de onderkant heb gedrukt?

Bueno primero de todo ,no me coje WiFi para emparejado me dice eso

Hola no lo puedo manejar con el movil. Me dice se necesita una aplicación para usar este dispositivo. No se que aplicacion es . Lyric B8920D Antes me funcionaba

Hello, I have an indoor motion viewer. I wanted to know how to install it on my phone. since which app??

What a garbage thermostat. I guess you dont care about your customers freezing at night when this bipolar device shuts off.

The music is so horrible when we’re trying to learn something. 👎

yu

How can i change the temperature? I spin that thing all around and try to set the temperature but I dont know how to confirm it. It just keeps getting back to the original temperature

Honey Well thermostat

How can you go to manual mode instead of setting each day?

Connected everyting as you have here, thank you very much! But the green light does not come on. What might be the problem here?

This thing is a nightmare. I’ve watched every instruction video I can find. My house is 12c inside right now, and all radiators are cold. I’m wearing gloves. I regret ever having had it installed.

Dank! Zeven jaar later nog steeds relevant:)😊

Stupid if you connect to the thermostat with Wi-Fi and than try to use the internet you will get nothing the thermostat is not providing internet you can do it whole day you get nothing this is way stupid

Do NOT BUY this thermostat worst device to connect to internet. Also very very difficult to connect for an older oil heater. Trust me took me already 3 hours and not successful yet. Putting it in garbage. Don’t Buy any Honeywell devices.

Is er ook een mogelijkheid dat beide werkt? Dus via evohome en via de round wireless? Soms wil ik het via de evohome touch instellen en soms, als ik toevallig al in de kamer ben, wil ik het met de round wireless doen, kan dit?

The only one Who can set Up this thermostat is the guy in the video

This explained nothing

Op welke leiding wordt dit precies aangesloten?

Staat hier 220 volt op.. Kabeltje komt toch van de ketel af ??

Hi! Nice video but i did not find answer for my question which is: How can I set the tollerance of the temperature? For example I want 23 degrees in my room, and I want the room to be heated till 23,5 and then cool to 22,5 for example and then let the thermostat turn the heating and make it 23,5 again? Is it possible? Because now I have set to 22 and the heating is working almost all the time and does not let room get colder then 22 and because of that it uses more gas.

I have Hot water heat, radiators, and the temperature spread is 5 to 6 degrees, which really sucks.

Talk about a lame explanation! You'd think a company as large as Honeywell would actually know what it was doing, but evidently they hire people who aren't smart enough to get the job done.

Chronotherm touch modulation is een vreselijk slecht product Na 2 jaar werkte het touchscreen nauwelijks meer en we proberen via pendik als officiële installateur garantie te krijgen Wat mij betreft mogen ze geld terug geven of een ander merk ophangen maar deze thermostaat is bagger Overigens kan het zijn dat u 1 keer moet drukken maar voor hetzelfde geld 6 keer Regelrecht onbetrouwbaar en onvoorspelbaar

This sis a great system. We have a dozen or so of these thermostats in buildings adn love tha app and the control allowed from it. Fantastic job Honeywell.

De draden gaan in A en B, prima. En waar gaan ze dan in bij de ketel? Ik krijg net geen mogelijkheid beeld. Ik heb een remeha tzerra 28c met zo'n ingebouwde gateway voor een etwist (die kapot is). Kabeltje in de r-bus geeft beeld met aansluitfout op honeywell en rechtstreeks op aan/uit OT geeft 0,0 beeld...

I just did this to my Honeywell thermostat and somehow it messed up the system because my thermostat did not go up to 39. It only went up to 28 and when I did something to my thermostat doing that configuration I just gave up and just turned it back on cool And while it was on cool, it was blowing out like heat and cool at the same time so I had to figure it out myself how to put it back in cool mode without the heater being also turned on at the same time so either my thermostat is not Wi-Fi enabled orthis demonstration is bullshit

How to get it to connect to the receiver??

Can I bypass the sleep Wake leave on the thermostat

J'ai besoin de trouver quelqu'un pour changer l'affichage de mon appareil, savez-vous quelque part ?

Can I switch to degree Celsius ?

Oliver Dale

Cathryn Forest

I hate my thermostat it’s cool in herrrr 🥶

Bij mij geeft het geen cijfers aan maar alleen een paar streepjes gebroken horizontaal

Heb hem.sinds vandaag en werkt goed.

Fantastic instruction. I couldnt find my instructions ( on paper) but this is way better. Geweldige instructie, ik kan mijn instructie op papier niet zo gauw vinden maar dit is vele malen beter. Hartelijk dank !!

My th9320wf disconnected from the wifi, and NO LONGER has any options to reconnect, perform resets, or hold temperature indefinitely (following schedule only) . Please help!

Play music over the sound samples so we can't hear them clearly - brilliant.