what happened to this?

I purchased the strter kit but now cannot find the website - whats happened?

do i have to use all of your programing or do you have any open source products i can mold with python on the backend?

do you guys offer affiliate marketing?

is 3.7 ok

Where do you get the wheels?

Did u able to share the stl of exohand

Can you set up a run style like multisim, and please show me how to set up the stepper motor

Hey Mate, any chance you can do an upload on how to set up a stepper motor

Hey man, any chance you can do a basic stepper motor tutorial?

Hey mate, can you please show me how to build the stepper motor with your stepper motor drive board?

Have you done any videos on your stepper motor with drive board?

Mate, I can't log on with my phone and my computer at the same time. Is this normal??

May I compliment you on your clarity and speed of speech together with the clear logic of explaining how to connect the Bridge. Very helpful.

Hi, i need control around 50 stepers at same time, could you help here???

powering it for the first time LED status: “Green + 1 Blink”, and if I connected its wifi all I saw: “Please wait while the server is starting up. Do not unplug your Q-Server.” according your manual "this can take up to 5 minutes" after 1 hour, still nothing changed, so I pressed the reset for 10 sec. another 1 hour passed, and the led status is still “Red - Solid” If I connect the QuantumSetup wifi, the same text appears: “Please wait while the server is starting up. Do not unplug your Q-Server.” pls help

Hola.me puedes vender uno igual

How do I reverse polarity

i would like to study and do some research about bionic parts. But i don't know where to begin, can you help me?

Please check Trig and Echo pin assignment, firmware and circuit diagram don't match.

A little safer with relay- instead of hooking one end of black (hot ) wire to Common, and the other to Normally Open- specify which end of the black wire to which- if you put the plug end to the Common, that leaves the Normally Closed part of relay with outlet current exposed when its plugged in. Better to specify to put plug end of black wire to Normally Open, and jack end of black wire to Common. So, when off, live voltage only at the one terminal. When the controller calls for the jack to be on, the Common and Normally Open will connect the 2 black wire ends together.

Can you do a vr hand tracking with this setup?

A confused newbie: I followed the 1st part where you wired up the LED. But when you got to the 2nd part of wiring the button, you started with a 2nd empty breadboard. I ordered your Starter bundle, which came with only ONE breadboard. Was I supposed to receive 2 breadboards? I'm going to share my one breadboard between the 2 client bases, I'm sure it will do the trick (will ONLY share grounds, not positive voltages). BUT you might want to point this out in the video. Also, why not start off these beginner videos by explaining how the breadboards function - it's really important that novices understand the arrangement of the pins. It's somewhat obvious that the red and blue lines along outer edges (long sides) are for distributing power (plus and minus voltages from client bases). BUT I'll bet many initially don't know that the two rows of pins (one set labeled a-e, other f-j) are connected together to facilitate wiring of components (which normally will be inserted so as to straddle the long divider notch that runs lengthwise in middle of board). A total newbie could easily short something out without this knowledge... Update: seems as though the breadboard that came with Starter Bundle has two sets of isolated power bars. So can use one side's plus and minus bars with one Client Base, other set of plus and minus for a second Client Base. So the one included breadboard effectively can work as two :) Hopefully this is documented somewhere and I just missed it...

I try it, but it doesn't work. How should the prefix of the number be indicated?

is there a way to add time vs level graphs using the dashboard?

Could you show us how to do a robot arm?

My Q-server says it on a different network to my PC. Can I reset the Q-server?

I'm going to ask the same question to Quantum, as I do to many of those these days that create development systems.... IS this going to be the case where software will ONLY be supporting mobile phone projects? - or can PC Supported ( as in full sized 1920x1080 ) .exe projects can be published. I'm sick of the lack of support for PC users that can ONLY make APK applications to go with their hardware projects & believe that anybody that recognizes that PC users need to be able to create projects that can run from a PC will be well placed in this hobby market.

This vid should have more views and liked

Great tutorial that got the juices flowing! What's next? Is there anywhere that I can find documentation on triggering actions, such as turning on a fan?

Can you make one with transistor for my CNC

It must be disappointing for you that more people are not following this site . I have just purchased this system , and are looking forward to a using a different system to Arduino and Raspberry-Pi .

Terrific. I just found this kit to practice electronics.

Wow, this is awesome. This is what i always wanted. Wish u guys all the best.

I always wanted to make a robotic man and you can control it using your body

First of all the project looks amazing and your work is really appreciated. I have seen project documentation page in that the cost present beside intermediate is kept as 374 dollars, Is that cost about components?

How would you package this to make this useful in a real world application? Problem is the builder base is too big for incorporating into a simple magnetic contact switch.

This is so cool, gonna have to build this later. What for? No clue.

I get mine to say welcome to the Q server please update your server before continuing. When I press update it says "update isn't supported right now" What does this mean??

Mate you should pin this to the top of your vids. Also can this be run off a hotspot??

Thanks. Worked well for us. BTW, the Hue gateway (correctly!) auto-detected the IP address of our Hue hub.

Good video but on my Q-Server Webpage it says I have to update but anytime I click on it, just says "Update not supported right now". How am I supposed to fix this issue??

interesting

Mate can you show me how to make an automated vertical grow tower

Hey mate It seems you have a nice set up can you do a video on making a automated vertical grow tower??

Vieleicht wäre es sinnvoll ein fertiges Projekt vorzustellen. Zur Anschauung. Würde Lust auf Nachahmung machen. Man könnte auch die Community dazu auffordern eigene Videos von ihren Projekten zu machen und einzuschicken. So kann den Mehrwert und Ideen erzeugen. Macht weiter so :-)

Nice video. A bit long though. Could you just assign the actions to the buttons directly rather than having them selectable from dropdowns. That would have made it less complicated and a bit shorter.