Taylor Angela Hall Margaret Hall Helen

Great hack! Thank you!

Orocal 651 is the colored stickers, Orocal 6510 is the same, but it's the fluorescent colors.

Awesome!!! Thank you for posting. 10 dollars on amazon would give you 10 square feet of this vs the one square feet you get at archery supply stores. This way you can cut them to sizes and fit whatever arrows you have!

Thank you!!!!

Yeah that is a bloody nice bow mate👍

This video made my Day!!!🙏Thank you

Hi mate, thanks a lot, could you tell me if it is Oracal 651 or 6510? In my country the 651 is 0.07mm thick and does not exist in neon yellow, however, the 6510 is 0.11mm thick and does exist in that color. thank you very much in advance

Bohning fletch tape works great with this stuff

But I'm farther ahead by not having to buy all the extra tools I would need, I also don't have to store all the extra stuff.

Thank you. It’s about time that I take that cost saving step.

Roger that, I'm on this 🫡

And here I thought all this time it was a special vinyl that resists melting under the glue or something amazing. DAM, thank you for this!

Trad bows have always been about reliability, and versatility for me. ILF bows are a good compromise between compound bows and traditional one piece recurves and Longbows

My wife listening in the background says: "I have the vinyl already" "I have a crickut machine" "I have a board for cutting that you can use, dont touch my machine"😂😂

A year later and you the man......

3M makes some super thin vinyl too

Awesome sauce

Is that the Brimestone yellow?

Love your setup and the ILF platform. CORRECTION EDIT: Just found out that the Samick limb pockets are indeed metal, aluminum, so that is good to know. Getting a few soon.

Thanks for the great saving $ tip!

I’m looking to start traditional bow hunting next year and plan to film the process. Any recommendations on good budget longbows and recurves? Under $500.

Thanks for this idea. I am in Europe, so got a roll of standard vinyl for outdoor use and works perfectly. Been shooting for months, never an issue.

Great tip, it will save $$$👍🎯

Great tip sir.

Awesome answer my question of to make my own now

If you happen to know someone with a Cricut they can set the machine up to cut them out for you..

Here's a cheap tip... I couldn't find a foam for my Mathews T5 quiver to save my life. I found one, but it was $27 and that's just way too high for a piece of foam. I ended up getting a yoga block that was about $10 to cut a piece out of. As I pulled the old foam out of my quiver, I found that the reverse side was perfectly intact and usable so I just inverted it and reinstalled it and BOOM! Zero cost! But now I have to take up yoga to justify buying the foam block! 😂

Would you still recommend this riser? Im trying to choose my first ilf riser for a hunting setup

Great video thank you

Hey bud. I would like to see if you would be willing to make this quiver bracket for me and id pay for it...

Question about using wraps. Never used them before. Do you clean the vinyl to remove the oil of the wrap like you do with bareshaft? I always wipe the fletching end down with denatured alcohol. What’s you guys method? Thank you in advance.

I just ordered some, thanks for the tip!

Sounds like a guy (The Fixer) who did home remodel series of an older home in Connecticut or somewhere up there.

Your quiver looks so nice!

Beauty, how's that sight window for longer shots. It's 7" ? If I remember right. I've got it in my Amazon cart just waiting to pull the trigger on it . Wanting some info before. Looking to shoot off of a spring rest . It looks like a flat shooter. You shooting wood ,alum or graphite. I like graphite

Thanks M8 from OZ, great work!, I am doing the same, 👍

I JUST bought this same bow. I’m shooting off an elevated rest. My bareshaft looks good but it’s a 31” arrow at 600gr…260spine arrow with 250g up front. Seems VERY stiff to me. But the shaft is consistently good. What spine are your arrows? You said you had to stiffen them a lot.

Nice bow. Nice setup. Good video, thanks

Thanks for the presentation. What's the brace height on that setup?

I go to a local craft store called Michaels, it’s a large chain. I buy sheets that are roughly 14” X 14”. I measure them so there is very little overlap and I don’t run my wraps all the way back to the nock either. Too much vinyl just adds more tail weight. My wraps are approx 3” in length and I center my fletch on the vinyl. I can get between 40 / 50 wraps per sheet of vinyl. I also bought an economical cutter from there as well, and I can have a whole sheet cut in about 10 to 15 minutes.

I had good luck with a different Orafal retroreflective vinyl. Lights up pretty well with just a little bit of light. Less need for a lighted nock depending on the brush

What riser length?

what is that cutting board called? some type of seamstress board?

I remember xx75's from 1985.

The people that use VVIVID Vinyl Wrap recommend the non perminant adhesive. More color selection with Oracal 651 but I only find perminant solvent based adhesive. How does the thickness compare with purchased and is Oracal 651 easy to remove by dipping in boiling water like purchased.

Great tip. I will check that Oracal 651 out. I have plenty of arrows to wrap. Thanks. I have liked and subscribed.

Man you say Uh an a lot I don't believe I would be able to watch your videos. Sorry bout that

Recently got a #50 Discovery with R3 limbs also and liking it 👌🏼. What size is that Big Jim's quiver? I wish they had size comparison photos on their site. Is that the chocolate color? Thanks

Do you need unstring ''syntetic'' bows ? after shooting ?