How does the air filter on compressor come off to change?
@caidenguevara94483 күн бұрын
Unscrews they suggest to relocate the filer to a dry non debris area
@_No_Hilfiger2 күн бұрын
@@cameron-4757 ^
@charlesmccarthy206412 күн бұрын
I had same idea started looking and found you!!!! Came out 👍 nice work
@honeysandhu744518 күн бұрын
i like these tyres and rims how much wide size ??
@_No_Hilfiger18 күн бұрын
@@honeysandhu7445 14in wide with a spacer
@josegonzalez976022 күн бұрын
Where did you get it powder coated??
@phanuel740023 күн бұрын
Impressive brother! Thanks for bringing us along
@blacamigoo3504Ай бұрын
ngl yu skipped the part i was looking forward to😑
@_No_Hilfiger29 күн бұрын
What part I can still help out lol my bad
@xl0nest4rx11Ай бұрын
Skar??? No thanks. All about JL Audio man....
@israelmontoya2607Ай бұрын
What lift did you have on originally?
@SlaterMadeАй бұрын
Got a link for that aftermarket front bumper?? looks sick
@cajundad50422 ай бұрын
I bet daddy was pisssed when he seen all the over spray on the 280z. Chalk it up as a lesson learned for next time.
@_No_Hilfiger2 ай бұрын
@@cajundad5042 nothing a clay bar kit can’t fix lol, but yeah definitely prep the area next time
@carlitot53883 ай бұрын
Nice truck ! RAM 🐏 GANG
@ciaranmaguidhir78583 ай бұрын
Quick question, after priming did you sand again before using the duplicolor??
@_No_Hilfiger3 ай бұрын
Yes gotta sand it
@ciaranmaguidhir78583 ай бұрын
@@_No_Hilfiger sounds good man I appreciate the response
@carlitot53883 ай бұрын
Clean! RAM 🐏 GANG! 🙌🏾🔥 the old body style killin the new ones ! My opinion! ✊🏾
@xGR1MxREAPERx5 ай бұрын
Lol all the paint fumes and overspray are going directly on his door panel and that red car lol.. dude come on.. cover the car and move the damn door panel.
@_No_Hilfiger5 ай бұрын
It’ll buff out lol
@rffonseca20115 ай бұрын
Wondering how is it holding up thinking of doing the same. Any UV damage?
@_No_Hilfiger4 ай бұрын
The paint held up very well. The clear coat didn’t last too long. Need to find a more sturdy one.
@jose_t250f86 ай бұрын
it comes with the meteors what’s did you do with them?
@_No_Hilfiger4 ай бұрын
So I purchased that with the kit and it did not come with the correct piece for it. I sent it back and requested the meteors kit. And they sent me a new kit. When I opened it was also missing the meteor kit. So I think it wasn’t meant to be lol
@hugo16557 ай бұрын
how’s the paint holding up any peeling?
@_No_Hilfiger7 ай бұрын
Held up but it’s tough getting bugs out from it . The clear coat would peel in some spots but the actual paint is solid.
@Alan-qf2nu7 ай бұрын
after seeing how low that sits i’m happy i decided to do mine in the toolbox because i am a farmer and going through ditches in fields i would’ve smashed the horns if i put them there
@blockay44g176 ай бұрын
They make the stealth model too you will have 5 inches of ground clearance that model will sit above your bumber
@richardchristow7 ай бұрын
Looks dope buuuuuttttt they’re probably dim as hell
@_No_Hilfiger7 ай бұрын
Lmao I was like wait a min. But just imagine how it would look without me messing it up haha.
@chrizze50627 ай бұрын
Bro how is it holding up? Is the 12v outlet still working for you or is the 32watts too much? Mine just turned off on me after a couple hours
@_No_Hilfiger7 ай бұрын
Mine is still functioning just fine. I have it plugged up to the 12v outlet
@i8Rout8 ай бұрын
When the time is ready 😂 I thought it was, “We’ll be ready when it’s time”
@i8Rout8 ай бұрын
What’s wrong with this guys hand when he’s point, Looking all frozen and shit
@i8Rout8 ай бұрын
This is the worst video , This guy doesn’t even know what he’s talking about to do what on what color to paint 😂😂😂
@i8Rout8 ай бұрын
Wooooow this guys could of had the other one headlight going while he was pulling the first one apart
@i8Rout8 ай бұрын
Shit I thought the yellow marker was also a housing ,
@elvisbest32139 ай бұрын
I just put mines together this weekend and the monitor gauge i had a hard time stopping a small leak but i fill it with air using a battery charger and check for leaks with a bottle of soap and water and keep checking the air pressure and when i see a bubble while it was under pressure i would tighten it up til it stop i had to replace some of the thread tape the had apply it was not enough but i check all the fitting and now everything is ok SO ADVICE FOR EVERYONE CHECK FOR LEAKS WITH SOAP AND WATER BEFORE YOU PLACE IT UNDER YOUR VEHICLE
@ethandavis56749 ай бұрын
Bro I’m about to do my 3 row car
@FamousXander10 ай бұрын
bloody hands and crocs, I'm in
@nickadams295110 ай бұрын
does it sound louder in the bed or under the truck?
@AustinDouglas7511 ай бұрын
#MOPAR
@speedsoft10111 ай бұрын
What size rings are they?
@mrdamonnoza Жыл бұрын
Swap the license plate bulbs out to led to match. Truck looks good!
@ElChanco Жыл бұрын
Dammm That truck look cool
@cheivyslim8177 Жыл бұрын
Welp I’m a little late but sorry buddy that’s not the loudest truck in duvvvvvvvval904 maybe your neighborhood it’s the loudest. It’s clean I like the setup🔥🔥🔥🔥🔥
@MalikLorenzo Жыл бұрын
U think 1000 is too much for a coupe?
@_No_Hilfiger Жыл бұрын
It’s never too much but it will be very bright, and with a small area to cover just keep count of all the holes you make.
@jfloyo11 Жыл бұрын
That red car is going to have paint on it.
@_No_Hilfiger Жыл бұрын
I’m up for the challenge to remove it all lmao
@jfloyo11 Жыл бұрын
@@_No_Hilfiger lolol
@nickkiosk5513 Жыл бұрын
Now flip the mirrors up to tow and realise you didnt spray the entire mirror arm only whenever its flipped in
@jesusbedolla753210 ай бұрын
Those aren’t tow mirrors
@Jonaomw Жыл бұрын
Is 54x60 to small for a grand marquis?
@randywilliams467 Жыл бұрын
Fixing to do mine great information
@_No_Hilfiger Жыл бұрын
Note to self* don’t paint the reflectors.
@urdad19312 ай бұрын
@@_No_Hilfigerwhy what happpened
@edwardrodriguez8846 Жыл бұрын
do you hear any noises when turning ?
@_No_Hilfiger Жыл бұрын
Tire would rub on the upper control arm sometimes.
@Showmegenetics Жыл бұрын
Damn I hope thats your car in the background catching all that over spray 😅
@_No_Hilfiger Жыл бұрын
It is, but I’m gonna get it painted again anyways .
@carterhollowell Жыл бұрын
did u sand down the filler primer
@_No_Hilfiger Жыл бұрын
I did, I think lmao
@187landen Жыл бұрын
Hey man im genuinely curious how well has it held up? I want to do this to my truck but be REAL how good is it and do you recommend it?
@_No_Hilfiger Жыл бұрын
The clear coat that was used did end up chipping off but the paint held up.
@GoProGoalieUzi5 ай бұрын
@@_No_Hilfigeruse spray max 2k clear next time. Best clear coat on the market. ❤❤❤❤
@MoparMenace Жыл бұрын
For just a 6 inch lift that thing looks huge. Every other 1500 iv seen with a 6 inch lift is waaaaay smaller then that?…
@kqwl11 ай бұрын
he probably has some other stuff to give it more height looks like he’s pushing closer to 8-10 on his lift bro
@JustinMurray-pz3ru5 ай бұрын
Can be the tire size as well
@MoparMenace Жыл бұрын
Why does every other 6 inch lift on a 1500 look tiny compared to yours.??
@_No_Hilfiger Жыл бұрын
I’ve noticed that myself parking next to other rams
@doobedi Жыл бұрын
How did you wired it
@_No_Hilfiger Жыл бұрын
Right now I’m using the 12v outlet
@_WELDR_ Жыл бұрын
Badass truck Brotha 👍🏼
@LifeWidBlack Жыл бұрын
Just said loudest in Jacksonville please stop 😂👋🏿
@_No_Hilfiger Жыл бұрын
Gotta hype it up ⬆️
@YunGGinxTD Жыл бұрын
You been missing bro 😂
@YunGGinxTD Жыл бұрын
Man I love truck builds on yt 😂 in the process of paint my 9 inch now
@_No_Hilfiger Жыл бұрын
Roller video coming soon to YT near you
@djaychason6429 Жыл бұрын
Never thought I’d see this town on KZbin
@_No_Hilfiger Жыл бұрын
Someone gotta do it
@captaingti Жыл бұрын
Hey my man i love the ram. I just got my 8 inches installed. i am sitting on 24x14 tuff 2a's with 37s. I rub bad on turns. not on the bumper but on the fender in the back. I ordered the body lift you have. Do you have any issues rubbing with your tires in the front on turns? My tires hit my fender flares on turns. Thanks for the help, and inspiration to build mine.
@_No_Hilfiger Жыл бұрын
The body lift should help with that. Mine rubbed without the lift but also bc I ran 38s on a 6in lift.