I bought the stupid press and it’s garbage. I was ready to put a hammer to the back of my watch until I found your video and IT WORKED 🎊 Oh my goodness! I’m so happy! Thank you 🙏 thank you
@JonPoklopАй бұрын
What do you tow with the mower than needs a ball hitch?
@RenaissanceMacbethАй бұрын
Wood chipper
@swtsarakcАй бұрын
Omg I finally fixed my watch, thank you!! My watch fell on the tile floor and the back popped off, but I couldn’t get the back, back on it. Finally worked with a metal wrench, I was hammering the back of it and everything 😂
@BeerkeyАй бұрын
That is way to thin and that weld is not strong enough to tow more then 100 lbs (beauty has a lot to do with welds when it comes with penetration and strength) do not tow anything that you are not willing to lose if you can not stand on it with out moving and bending it is not strong enough. Sorry for being mean I am trying to save you a headache in the future.
@RenaissanceMacbethАй бұрын
Appreciate it, pardner! She’s been holdin’ steady, and I’m mighty grateful for that!
@BeerkeyАй бұрын
@@RenaissanceMacbeth good to hear just stay safe
@mihaibymihai26562 ай бұрын
Instead newspapaer use a towel. It works. Thanks
@RenaissanceMacbethАй бұрын
Great idea!!
@ellenbronson40672 ай бұрын
Thank you!
@RenaissanceMacbethАй бұрын
You're welcome!
@herewardofbourn81974 ай бұрын
Well broke mine what a stupid design
@herewardofbourn81974 ай бұрын
No matter what i do it wont go on
@knowledgefinder14 ай бұрын
This technique closed my beautiful SKAGEN back cover back on after I couldn't get the cover back on for 3 months ... my wrist is styling once again. Thanks man!!!!
@RenaissanceMacbethАй бұрын
Glad it helped!
@WeMuckAroundАй бұрын
I have a Skagen and it’s not working for mine! I’ve tried all sorts. Will finally have to take it to a jeweller this week… what a stupid design
@azorailke60574 ай бұрын
Thanks for the video. In case anyone who still has trouble even after following the video, here are a few things to note: My watch case was extra stubborn, so much so that I pressed so hard that I had broken capillaries on my palm. My mistake was that I had the watch on a mouse pad. It must've dampened the pressure resulting in failure to snap the case. Secondly, I had to rock the pressure a little side to side. These two changes got my case to successfully snap close. Exercise proper judgement for your watch, as these tips may do more harm to your watch than not.
@ShellyBracken-cy2nq4 ай бұрын
Thank you for sharing this.
@RenaissanceMacbethАй бұрын
My pleasure!
@adamjohnson15024 ай бұрын
He don’t have time to make a video but he’s making a vid 🫨
@carrielockhart75 ай бұрын
Gosh, I have tried and tried and tried. 😩 Why can't I get it?
@GallagherCreatives5 ай бұрын
Genius! Worked! Thanks!
@RenaissanceMacbethАй бұрын
Excellent!
@dannyrusso82795 ай бұрын
Great tool to use. After struggling for 15 minutes, I grabbed the wrench and got it on in seconds. Thanks for posting!
@RenaissanceMacbethАй бұрын
Glad it helped!
@tylowe785 ай бұрын
This didn't work for me
@ab290866 ай бұрын
Thanks for your video and insights.
@RenaissanceMacbethАй бұрын
My pleasure!
@latinojw6 ай бұрын
Just cracked my glass. So much for this method
@RenaissanceMacbethАй бұрын
Sorry to hear that
@killianschultz20277 ай бұрын
Life saver!
@Fr0gg07 ай бұрын
I tried similar ways so I thought I did something wrong since it refuses to close, so I looked up some tutorials but all of them does the same. I can't for the love of god get it to close and I press so hard it feels like the glass is going to crack. It feels like the cover got too big all of a sudden after I opened it. Damn it.
@Slap_it_in7 ай бұрын
Anyone try putting the back in the freezer and warm up the watch a little first?
@xmyn7 ай бұрын
Thanks for the video. However I tried and still can't close the back cover, it just won't snap back in. Any other method or hint? Thanks.
@RenaissanceMacbethАй бұрын
As long as dial is aligned and crystal is supported newspaper or bath towel; try applying more pressure to it, when i did mine remember putting my full weight to it.
@Blazjul7 ай бұрын
Didn’t work
@simonfairclough67287 ай бұрын
F*ck off you absolute toss pot, you owe me £280 you useless bast@rd, dont listen to anything this guy says just smashed all my watch face in
@whatworkedforme8 ай бұрын
still helping 8 years later😁😁.. I was struggling too until I saw this... I was amazed at how little pressure it took.. I was afraid of breaking the glass too so I tried just a little pressure. grateful. If I did have a glass that wasn't flat I could have made a a dip in the surface I was pressing against... in the end it was so quick and easy. 👍👍
@britishmurders9 ай бұрын
Legend! Been struggling away for half an hour before seeing this. Cheers.
@noahkarlsson42909 ай бұрын
I did this and put all my body weight on it and it still wouldn’t budge. I have been trying for an hour trying with different objects I’m laughing at how this stupid back cover beat me
@davea.231110 ай бұрын
If the watch crystal is domed or in any proud of the watch case, the chances are you will crack the crystal. Ok if the watch is flat fronted.
@HisNameIsCheese10 ай бұрын
I watched a bunch of different verisons, didnt work. This method worked great. Thanks
@Mobin9211 ай бұрын
More like: How to track the crystal if you are unlucky...
@martincarr329911 ай бұрын
works! - I had the same issue with a Skagen watch
@natasfresas11 ай бұрын
Thanks, I just broke my glass. Threw away my watch
@MariIli11 ай бұрын
thanks 🙏
@briantack205811 ай бұрын
Phew. Thank you. Rescued me
@BlastoiseVeteran11 ай бұрын
you saved my life!! thanks so much for this video!!
@stev7.quiros11 ай бұрын
Thanks, only this tutorial works for me. 👌
@junpark4007 Жыл бұрын
YOU are the lifesaver! My old Casio watch was just wasting away uncovered for 2 years and now I finally was able to cover it back after 15 secs watching your video, thank you very much!!
@rons7555 Жыл бұрын
Thanks for this video. It was really helpful. Especially for a Omega De Ville watch case that has this kind of case back. By the way is it common for this snap on case back to have a gasket ? My Omega has one.
@nikkiw8231 Жыл бұрын
So simple and so genius!
@geoffreysharp5571 Жыл бұрын
Don't recommend smashed my watch face. Fortunately a cheap one 👎
@rich4716 Жыл бұрын
Even went and got the wrench out and it still didn't work 😭
@rokph1067 Жыл бұрын
Thanks
@GK-qc5ry Жыл бұрын
Thank you buddy. I put a tea towel down first, and folded kitchen paper towel on the back and pressed and it worked.
@SLevinCinema Жыл бұрын
THANK YOU!! Swapped a battery on an eBay find and I thought I had a mismatched case/back. No idea they could take that pressure!
@jimcowan6472 Жыл бұрын
Thank you soooo much. Just got the back of my Skagen on easy peasy thanks to you 👍👍👍
@magatamass Жыл бұрын
I'm literally putting all my body weight to my Casio and it won't close using that method
@michelpp01 Жыл бұрын
Pretty dangerous method with curved or elevated glass or crystal. BEWARE! Prefer using a propper watch press.
@troggish Жыл бұрын
Did as in photo but smashed the glass😢
@rjakez4335 Жыл бұрын
Wow this helped me so much, 2023
@Musicmaker2100 Жыл бұрын
Thank you. This worked for me with the flat side of a level...I was going crazy trying to get it back on.