Brian Arsenault

Пікірлер

@shalynneorth2558 Сағат бұрын

Thank you kindly sir 🙏

@GRADGRAD-jq9nk 2 күн бұрын

Why not switch positions?🤨

@brianarsenault9281 2 күн бұрын

A good question. To be honest, the grandson wanted a few minutes of fame : o)

@AndrewTait-ql1rq 20 күн бұрын

Thank You the diagrams are best yet

@brianarsenault9281 18 күн бұрын

I'm glad it helped. Thank you Andrew for the validation.

@billtaylor3499 27 күн бұрын

It's so hard for Riker to pump the can because the white plastic valve in the top of the can is only depressed by air pressure. His weight barely opens the valve, then has to fill the can. If you trim the bottom of the tire valve stem such that it still seals against the can, but the metal part depresses the white plastic stem in the can enough to open, air flows easier, and you only have to pump the actual pressure needed in the can. Those of us with older ears often find Any background sounds, including music we'd normally like, interferes with understanding speech. Jus' sayn'.

@terryross1754 Ай бұрын

The tension ring is supposed to be on the inside of all the tabs. And I recommend a rag or rubber mat between your shiny smooth hubcap/cover and the rough concrete ..... Where I live, ony 2x zip-ties will keep those covers on. The potholes flex & bend the rims and you lose the wheel covers if they're not tied on.

@jarnw 2 ай бұрын

Literally JUST happened and this vid saved us! Thanks for the vid!

@brianarsenault9281 2 ай бұрын

Your validation is appreciated Jarnw ... Thanks. : o )

@JohnsOnStrings 2 ай бұрын

Great job Brian!

@agriff4440 3 ай бұрын

Thank-you from northern Canada 🇨🇦

@brianarsenault9281 3 ай бұрын

That was kind of you to take the time to show your appreciation.

@dontdlay 4 ай бұрын

Thank you !

@brianarsenault9281 3 ай бұрын

Thank you for the validation Dontdlay :)

@tedhederich3600 4 ай бұрын

Thanks for this video!! Much appreciated. Can you tell me if the cleaning smell lingered long after it dried?

@brianarsenault9281 4 ай бұрын

Upon completion of the cleaning, I aerated the interior by leaving the flaps down (covers over screens) for 8 hours, as this cleared any residue of odor.

@tedhederich3600 4 ай бұрын

@@brianarsenault9281Thanks much, we have used this product and I am amazed at how well it worked, unbelievable!! Again, thanks for the video!

@brianarsenault9281 4 ай бұрын

@@tedhederich3600 I remember well what it was like for me when I saw the results. . Mold travels slowly over time. and can make a real mess of a trailers interior vinyl. I know exactly how you were feeling, I've been there. Thanks for the comment Ted.

@ACCORD517 5 ай бұрын

Beautiful duet. 😊

@ACCORD517 5 ай бұрын

This helps, thank you Brian.

@brianarsenault9281 5 ай бұрын

It's always nice to receive a validating comment, thank you ACCORD517 : o )

@kiwien1086 6 ай бұрын

You are beautiful I love you

@1dnd2dnd3and4 7 ай бұрын

Looking and sounding great

@asid731 8 ай бұрын

I like how Canadians say eouwt for out

@suzzylouloudougherty5237 9 ай бұрын

Perfect

@brianarsenault9281 9 ай бұрын

Your reply Perfect, sums it up very nicely, meaning the problem of mold is gone. Thank you for the comment : o )

@grantp4022 10 ай бұрын

Great comment by Max, and I never thought about faulty valve stems, and I have a leak in 2 tires, that lose about 6 PSI per day, so I'll have to get all things checked. Great comment to give me some thought to properly fix it. Aged tires as you say, can also cause a leak, and then you have to replace the tire(s) as this happened to me before. I can't see soapy water working as shown in this video, but I guess it's possible ?

@monsieurdenis688 10 ай бұрын

Hi, We really want to thanky you. This product remove mildew for more then 10 year accumulated. My wife is amazed of the result, because we tried multiple VR product and she was sure this Starbrite was another lost of time. So we call this kind of result an home run. The result increase the value of our VR. Thank for all detail in your video as to use sponge Sorry for english Wright en because I’m french canadien. You really help us

@brianarsenault9281 10 ай бұрын

Glad I could help, and a big thanks for your validation. 😃

@zakmey6944 11 ай бұрын

I just love the southern comfort music, the guy in the video reminds me of a texas movie, the grandson i give a thumbs up for effort. Hahaha

@brianarsenault9281 11 ай бұрын

I always enjoy a comment like this, thanks for the validation Zak

@scottbamasime4338 11 ай бұрын

That is canvas not vinyl..

@brianarsenault9281 11 ай бұрын

Thanks for your feedback Scott. Either way, the product Star Bright removes the mold and gets rid of the problem.

@tisharobertson 11 ай бұрын

wow that's beautiful dear , how about we chat up

@jonathanmonaghan883 11 ай бұрын

Brian thanks for your videos. Love your channel and how random it is. This video helped me with mildew in a pop-up camper. Keep on posting all those things that strike your fancy.

@brianarsenault9281 11 ай бұрын

That's very kind of you Jonathan to take the time to validate the video work I do . It makes it all worth it when I receive a comment like this. Thank you : o )

@johnnorman4369 11 ай бұрын

Very useful and precisely my problem whilst reversing a door.I tried packing each of the hinges but not both because the gap on the latch side is very close. I foolishly did not check for square on door or frame before starting work because it was against the clock with limited tools at my daughter's apartment. Interestingly when hung the original way the 4 screw (UK) hinges had been replaced with rising butts so I think there may have been a squaring issue already. You have restored my sagging self confidence thanks but would suggest the volume for the video should be louder.

@brianarsenault9281 11 ай бұрын

Glad to see that it helped. Thank you for your comment.

@ShanzayVlogs-cw8vh 11 ай бұрын

Nice sharing 👍

@brianarsenault9281 2 ай бұрын

So kind of you to validate, thanks.

@STORERUN Жыл бұрын

Thankkkkkk uuuuuuuuuuuuuuuuuuuu ❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

@jpaullino Жыл бұрын

Already lost 2 on the highway. 😅Thanks for the video!!! 👍

@brianarsenault9281 Жыл бұрын

Thanks for the validation : o )

@rrsp253 Жыл бұрын

drove around retracing my path for 1/2 an hour and found my hubcap. going to try this. thanks !

@brianarsenault9281 Жыл бұрын

Taking the little time you did to watch the video I'm sure will pay off. Thanks for your thoughts.

@firdausravindar977 Жыл бұрын

Thank you for posting this valuable video on KZbin.❤😊😊

@brianarsenault9281 Жыл бұрын

Thank you, it always nice to hear someone's thoughtful response.

@MaxGiganteum Жыл бұрын

I noticed that there was no inspection of the tire, the valve stem or the rim. Normally, your tire shouldn't lose any air pressure even when it's cold. I will put forth the suggestion that there was something else going on that was not covered. Here's a list of things to check: - A bad valve stem. It could be old & non-flexible thus not sealing at its base. - The stem could have hairline cracks in it and allow air to escape during vehicle ops. - Is the valve stem the correct size for the hole in the rim?!? - The valve in the stem itself may be bad thus air is leaking by it... possibly only during vehicle ops! - An obvious minor puncture in the tire that has gone unnoticed. - Road debris may be imbedded in the tire... and it's VERY small thus is hard to see. - Checking & cracking in the tire due to age thus pressure slowly bleeds off - perhaps only when the vehicle is moving. - Damage to the mating lip of the tire that cannot be seen when the tire is mounted... yet air escapes during vehicle ops due to flexing of the tire. - An unnoticed rim defect. The rim itself may have a hairline crack... or have corrosion issues. Only a careful inspection may reveal the issue. - The rim may be warped or worn at the lip thus allowing air to escape. - Is the tire an appropriate and matching size for the rim? - Is the car being driven at a level beyond the limits of the tire? - Is the vehicle being loaded with excessive weight? - Is a friend, family member, co-worker or neighbor pranking you? - Is a friend, family member, co-worker or neighbor intentionally sabotaging you? The bottom line here is that there is always a root cause as to why a tire loses pressure - you've got to find it. Some folks may claim that they pulled the tire and rim off the car and used a dunk tank to see where air was escaping but found nothing. Well guess what? That may be true but you still have a leak and the reason why is because the conditions aren't correct for air to escape. In other words, the tire and rim has to be mounted on the car for the condition to be in existence. Sometimes a tire can be on a car for a week or weeks... and not lose pressure until the car is driven! Other times, you simply have to dismount the tire to fully inspect the tire inside and out as well as the rim and the valve stem to discover the root cause. If there is any doubt whatsoever about any of the three things (meaning a sound & serviceable rim, tire & stem) then replace them. Injecting a soap & alcohol mix may stop a leak temporarily just like a product such as tire slime might. However, it would be wise to conduct a full inspection because something serious could be going on. One of the most common problems is aged valve stems and/or tires... which definitely shouldn't be on the road in the first place. Blowouts can kill - don't roll with parts that shouldn't be on the road. Best wishes! 👍🏻🚘👨🏻‍🔧 - Max Giganteum

@brianarsenault9281 Жыл бұрын

As layout in Max's comment, all good points that should be considered before taking the quick fix steps as demonstrated in the KZbin tutorial. I've since taken the information as given and made it additional to the write up in the description. Thank you Max Giganteum for your support.

@grantp4022 10 ай бұрын

Great comment Max, and I never thought about faulty valve stems, and I have a leak in 2 tires, that lose about 6 PSI per day, so I'll have to get all things checked. Great comment to give me some thought to properly fix it. Aged tires as you say, can also cause a leak, and then you have to replace the tire(s) as this happened to me before.

@MaxGiganteum Жыл бұрын

You needed to fully examine both sides of the rotor at the friction surface for wear by default. You also check the bearings to make sure they're servicable as well as check the rotor for warpage and total runout. The reason there was more wear on one side as opposed to the other is most likely due to the caliper not freely floating thus there was more pressure applied to the inside of the rotor. Your solution may have been as simple as cleaning up and lubing the slider for the caliper and to machine the rotor after cleaning the sediment out of the vanes. Of course, you do both sides of the vehicle when servicing the brakes. Best wishes! 👍🏻👨🏻‍🔧🇺🇲 - Max Giganteum

@brianarsenault9281 Жыл бұрын

Your concerns are well made Max, and should be considered whenever examining or changing out the pads and rotors. Please do keep in mind, that the direction of the above tutorial was to bring attention to the accelerated wear that occurs on the backside of the Rotor. The back (inner) side of the Rotor is exposed to a much different road condition then the front (outer) side. Trappings of road debri, such as salt, snow, moisture and dirt will accumulate at the rear of a wheel well, which suggests a different environment than the outer side of the rotor. In closing, the tutorials intent was to bring attention to the accelerated wear on the Rotors inner side and the reason for it. Your thoughts are always appreciated and welcomed, thank you Max : o )

@someguyontheinternet- Жыл бұрын

Ryker nailed it.

@mikedollinger6132 Жыл бұрын

Thank You so much because i have had to replace hubcaps & even at $60.00 it becomes costly.

@brianarsenault9281 Жыл бұрын

Your welcome Mike, getting that tight fit is crucial to keeping that hub cap secured. I'm glad to see you found the video useful : o )

@chuckwilliams1849 Жыл бұрын

Nice to know can't wait to try it

@freetheport Жыл бұрын

Thank you

@kimberlysmith4413 Жыл бұрын

Thanks guys good to now I'm putting them on right this time...

@brianarsenault9281 Жыл бұрын

Glad to see you took the time to watch. Keep us posted and let us know your results : o )

@ES-yi8vv Жыл бұрын

Does the fluid in the tire effect its balance or anything like that?

@brianarsenault9281 Жыл бұрын

Not that I'm aware of, but I would suggest you follow the guidelines as laid out in the tutorial, and you'll be fine. Thank you for your interest. : o )

@johnoh1667 Жыл бұрын

A GOOD TRY,.Its certainly a lack of friction where the tabs contact the inside wheel rim. A three of pieces of waterproof emery paper overhanging the small rounded tabs, glued into place using plastic cement or similar, plus your fix will do it. The emery paper is usually enough to make it thicker to hold it in place better also. The wire adjustment might not be needed. After all its mainly a lack of friction on the inside rim that causes it to rotate and fall off. All tabs could be treated that way!

@brianarsenault9281 Жыл бұрын

John I'd like to correct you to your following remark, " it's a good try, " my tutorial is a good solution to a problem that exists with most hubcaps. The tutorial helps prevent hub caps from coming off. Your idea of glueing on waterproof emery is another possible solution. I personally wouldn't remove the ring, as the plastic tabs age they will eventually become brittle and break, making it imperative to keep the ring aligned for support. Thank you for your thoughts.

@loveeveryone8057 Жыл бұрын

Loved it! Thank you for sharing your Love

@brianarsenault9281 Жыл бұрын

Glad you enjoyed it!

@devilkillerthemonarchofhop7943 Жыл бұрын

Also, if you live on the west coast, take it to Les Schwab Tire Center, we will fix it for free.

@michaelfinley4187 Жыл бұрын

Thank you Jimmy... You good people...

@newshades7009 Жыл бұрын

a zip tie will keep them from coming off also

@brianarsenault9281 Жыл бұрын

Thank your for your input. No doubt it's a temporary fix, (an alternative Band-Aid), but unfortunately the tie wrap becomes an obvious eye sore. Keep in mind, the hub cap brings an overall aesthetic look to the steel rim.

@NuclearShot Жыл бұрын

that is one gigantic center cap

@luannahelfman5058 Жыл бұрын

Wonderful! Did you ever get those photos from me? I thought I recognized a few.....❤Luanna

@industrialathlete6096 Жыл бұрын

Thanks for a well made presentation and important info for pop-up owners!!!!

@brianarsenault9281 Жыл бұрын

Thank you for taking the time to validate : o )

@boydmerriman Жыл бұрын

I learned two things here, tape and an extra notched pointed out by a few here! Thanx!

@brianarsenault9281 Жыл бұрын

Glad it was helpful!

@loricayer Жыл бұрын

Thank you!

@brianarsenault9281 Жыл бұрын

You're welcome!

@promig9468 2 жыл бұрын

Great method! 🇨🇦

@brianarsenault9281 Жыл бұрын

Thanks for watching!

@MissX905 2 жыл бұрын

I'm going to try a product called Awesome as it says it's a degreaser and works on anything. But it needs to be dilute with some water 1st. I hope it works

@teakkabean5369 2 жыл бұрын

Can you tell us if it caused any damage or brittleness of the fabric? Now that it is a year later?

@brianarsenault9281 2 жыл бұрын

For me , I've had no issues using the cleaning agent Star Brite, the integrity of the fabric is still in-tact.

@teakkabean5369 2 жыл бұрын

@@brianarsenault9281 thank you !

Ең жақсы KZbin

Пікірлер