Impressive results. I would try it but I'm not sure it would work on a solid made by converting a mesh using the "Organic" Fusion conversion feature. The result has many faces, which may not work well with this plugin, especially the smoothing. Can you help ?
@NiffersFoapi3 ай бұрын
How to get the shortcut for free?
@MichaelTavel4 ай бұрын
This model is unprintable due to all the cantilevered overhangs, no? Is there a way to specify a maximum overhang angle in the tool?
@joaolopes81224 ай бұрын
Espetacular 👏👏👏
@ISinicyn5 ай бұрын
Magic❤
@iCongress5 ай бұрын
Hello, I can't follow the tutorial after around ~2:29, because the "Base Feature Solid" Menu does not show up. Why is that?
@iCongress5 ай бұрын
Okay, the solution was to double click on the timeline, if anyone else is wondering.
@jeanstamour22365 ай бұрын
its real bab to wath your video without explaine ,sorry
@charlaverdiere80346 ай бұрын
Can you do the bubble one but talk in video?
@Calzune6 ай бұрын
At 6.36 Im trying to deselect the very top part but I cant deselect anything...
@perceptino7076 ай бұрын
Thank you, Daniel, for your good question, which may also benefit other users. You should ensure that [Mesh > Inspect > Display Mesh Face Groups] is selected and hold the CTRL key when deselecting the faces.
@Calzune6 ай бұрын
@@perceptino707 hmm I have that enabled... but it deselects the entire body..
@perceptino7076 ай бұрын
Please make sure that [Mesh > Select > Selection Filters > Mesh Faces] or [Mesh > Select > Selection Filters > Mesh Face Groups] is checked.
@matteodemozzi49516 ай бұрын
beautiful video, I have a question... when I select the two parts to remove it deletes everything. how can I solve it? Thank you
@perceptino7076 ай бұрын
Thank you, Matteo, for your good question. I think other users may encounter the same issue. You should first double-click on the created base feature to enter the base feature editing mode (Video time: 2:20), and then ensure that the selection priority is set to 'Body' by using the menu [Select > Selection Priority > Select Body Priority]. Deleting bodies without entering the base feature editing mode will delete the entire base feature.
@ICXC888NIKA7 ай бұрын
amazing, thnak you for the inspiration!
@limitedhangoutlive7 ай бұрын
Why not just create the scetches on offset planes instead of using 3D sketching?
@uujims37627 ай бұрын
proboaly because it's faster for the demo, it's not even fully constrained.
@nunooliveira15708 ай бұрын
Cool tutorial! Does this tool allow to make the voronoi "arms" with a round section, (instead of quadrangular like in this example) ? Also, is it possible to control the overhang angles? (So that 3d printed parst don't require support material) ? Thank you! :)
@preparedness93928 ай бұрын
Great video bro. I have learn a lot things from this video. Keep up the good work
@perceptino7078 ай бұрын
Thank you Nguyễn! Glad to hear that. We'll keep trying!
@piranin6668 ай бұрын
Gracias!!!!!
@ericrandall35399 ай бұрын
$&@#ing subscription culture these days…. Just let me buy it.
@Fishtails10010 ай бұрын
Would this work on a sphere?
@perceptino70710 ай бұрын
Thank you Dave for the insightful question. The short answer is Yes. It's worth noting that the smoothing operation makes the walls thinner and the body smaller. For a sphere, because there are no base faces that we can exclude for smoothing, these effects will be more pronounced.
@okh569410 ай бұрын
You should have mentioned that from the beginning!!! Boooooooo
@Erosgenuino Жыл бұрын
Espectacular.
@mishaneamd Жыл бұрын
Шикарно!
@paulzacharias5784 Жыл бұрын
When I try to purchase this app it won't let me choose the $29/yr option, only the $4.99/mo. I want to do the $29/yr. I'm not buying unless I can do that.
@perceptino707 Жыл бұрын
Thank you Paul for your interest in subscribing to our add-in. On our devices, we are seeing the $29.99 option. It's possible that there may be some temporary issues with the Autodesk App Store in your region. We suggest checking the App Store with another connection, such as a different Wi-Fi network or cellular data.
@coulterjb22 Жыл бұрын
Your work on these addons is truly impressive. I just started working with Meshmixer for voronoi patterns. Would you by chance be working on a voronoi addon that can create the cells inside the body rather than from the surface? (3D Voronoi)
@coulterjb22 Жыл бұрын
Would this addon allow (in this video example) a more dense pattern at the bottom and fading to the top?
@coulterjb22 Жыл бұрын
Wow! Your add-on does what F360 cant. Their emboss feature cant emboss on a surface with two curves as shown here. Impressive!
@totoffe62342 жыл бұрын
NUL
@deniss88922 жыл бұрын
FREE solution, Voronoi Sketch Generator
@minravex99192 жыл бұрын
Please sir...help a brother...how can I layered this object for laser cutter....say I'm using mdf of height 18mm....I want to layered it so after cutting and stacking...I will have this shape in physical object
@bugiijorri71252 жыл бұрын
Good job and thanks for the video! Maybe kzbin.info/www/bejne/rKi5XnyjlN2fn8U will be useful for you
@mehdib1142 жыл бұрын
i just bougth your plugin :) and trying to print this model following your video tutorial :)
@perceptino7072 жыл бұрын
Thank you Mehdi for buying our add-in! We hope you find it useful and make interesting designs with it.
@masood60862 жыл бұрын
SUPER MY FRINDE BEST REGARDS
@sajidali-qg1mg2 жыл бұрын
What is the name of software?
@jaideepkobbari89402 жыл бұрын
How did you get perception feature? It is not available?
@mayankwadhera2478 Жыл бұрын
u have to buy it
@bmsfx2 жыл бұрын
just keep deleting my reply on where to get a similar plugin for free... i just message them then
@hachikuku_2 жыл бұрын
what plugin are you talking about?
@LifeOnMars3132 жыл бұрын
Very good plugin (addon) for Fusion 360 ! 29 $USD per year are not expensive and it works for the free version of Fusion ! Thank You very much
@bmsfx2 жыл бұрын
what is you stop paying, you can still use it but not update?
@RunTheTape2 жыл бұрын
I’d prefer paying upfront 60-100$ and having the addon permanently mine than ANY annual subscription.
@RunTheTape3 жыл бұрын
Per month payment ? No way.
@bmsfx2 жыл бұрын
Everything Fusion is online now and monthly payment, you dont buy software anymore, you dont own anything. Its a disgusting marketing strategy to bleed out working people, on "you always have updates", that most never need or use.
@RunTheTape2 жыл бұрын
@@bmsfx right. Then it’s not for me.
@PAFFO3 жыл бұрын
mate good idea, but for hobbiest is too expensive, there free resource online, perhaps consider to offer a low cost licence for non commercial user? (of course this is just my opinion and also the main reason why i wont subscribe to your app just yet) second: there is no way to make curved lines ? atm kinda look like a spider web, or a mosaic are you planning to do any update to fix that ? regards
@perceptino7073 жыл бұрын
Thank you Paffo for your comment. We will release a 2D version of this add-in in July 2021. It creates sketchs (instead of fracturing 3D bodies) and supports curved outputs and beveled outputs. It is also able to relax Voronoi sites. We also release a new version of 3D Voronoi Studio in July 2021 with some minor changes.
@surfenaccodata3 жыл бұрын
too fast to follow !
@perceptino7073 жыл бұрын
Thank you Helmut for your comment. You are right. Setting the playback speed to 0.5 may make following easier.
@paulzacharias5784 Жыл бұрын
Slow it down and its easy to follow
@user-ky3ui5xr7j3 жыл бұрын
Where i can download it
@perceptino7073 жыл бұрын
Hi Aliaksandr. The new version of this add-in is under review at Autodesk App Store, so it is temporarily unavailable. It will be available for subscription at the following address soon: apps.autodesk.com/FUSION/en/Detail/Index?id=1872190273770570241&os=Win64&appLang=en
@user-ky3ui5xr7j3 жыл бұрын
@@perceptino707 ok, sank you bro.) nice video. Good luck
@perceptino7073 жыл бұрын
Thank you Aliaksandr! The add-in is now available at Autodesk App Store.
@maibster3 жыл бұрын
@@perceptino707 wtf dude 5bucks a month ? u that desperate, come on anyone who wants to do this professionally and actually pay that money uses proper software like grasshopper and even that has a 90 day trial, just make it be free already, greed like that is just unnecessary
@noe10773 жыл бұрын
wow very, very impressive and this gives you unbelievable opportunities, if you think about it twice - is this also available for Mac OS
@perceptino7073 жыл бұрын
Hi neo, Thank you for your nice comment. It will be available for Mac OS about mid-December (2020)
@perceptino7073 жыл бұрын
Dear noe, 3D Voronoi Studio for Autodesk Fusion 360 is available now at Autodesk App Store for both Mac OS and Windows