u should put the red dot on the 5 inch barrel instead it would be a little more accurate💯

I have one and love it

Very awesome, I like how it looks!

I once owned that garbage gun. Why would you make it even less practical and add a red dot?

thanks for the info buddy! i will definitely look into this for mine now!

My first Aguilla bullet basically exploded, ruining my magazine and getting black marks on my hand. But that was also the first bullet I shot out of the HP 22. I think there was too much of some chemical or debris in the chamber when they shipped it to me. I should’ve inspected and cleaned it before using it. It’s worked fine ever since. But no matter what ammo I use I sometimes mysteriously get little infectious splinters after using the Phoenix arms. But I have the 22 and 25 versions one black one silver, and I love dual wielding them. Haha.

Clever idea. Might be nice for a little laser or something

Cool nice.

Thumbs down for the stupid and redundant music! learn to talk and provide details instead of being lame to use nothing but music as if that makes our viewing experience pleasurable

When the budget will afford it, certainly buy spare parts when those parts are known to wear at a quicker rate than the average. Many times in the past I bought things, problems started after a couple years of use, but then when I went to go find parts I could hardly them anywhere. When I did find them, most of them were used parts and sellers of the new parts were gouging people on the cost.

Easily got my thumbs up! No stupid music, presented with a lot of detail, and an overall down-to-earth video. Thank you

How to buy?

if you're looking for a hogue grip with a beavertail for the phoenix arms hp22a get the hogue grip sku #18300 for the s&w 45 and various kahr's handguns. it fits the phoenix arms hp22a perfectly with a little bit of overhang on the beavertail. you can trim the excess rubber off the beavertail or leave it as is.

Thank you very much for your help 👍

It helps, darn good video,

Try backing the camera off a bit. It's a little close for comfortable viewing. Thanks for the review, though. I haven't tried that grip yet. It looks pretty nice. I have a number of mouse guns that might benefit.

Have it.. but my slide is soo stiff and hard to pul back.. any thing i can do to loosen it up??

Great little plinker, a few small problems at first, did the safety mod (Ordered a new safety switch to keep for putting it back to stock) I filed off the bit that goes under the mag eject button and where the "safety bar" stop the mag release (so that it slides under) works 100% Fun to shoot, but, no 22 is reliable enough for a self defense weapon... For the price its a fun range "toy" and I use it to introduce new shooters.... I have had to spring go flying, your method should make it easier to "break down" TNX

Thanks dude, this was exactly what the phoenix was missing!! Well written and spoken review too!

that looks like a REALLY bad idea.

As mentioned Nail polish, available in many colors I chose yellow..wipe it off with an alcohol wipe first, then let the alcohol dry

"Affectionately " referred to as the SpiderNo Dollarca😂 by Spyderco owners.

Sir, can I buy a spare or barrel of Phoenix arms? I am from Philippines...

Yes, that big ass screw he used makes it a 9 rd mag. And of course with the 10th round in the mag, if you can get a round over the screw head won't hold open the slide, just jam it open. Dead gun. BUT, if as I did, you use a smaller (SMALL) head screw it works fine in all aspects.

why do you need spare parts? Won't they be replaced , if broken, under the lifetime warranty ?

bought a 3 pack of these on ebay. they must of redesigned the hp22a mag or something because i tried to follow the instruction on youtube on how to install these. my hp22 mag has a small flap at the bottom of the mag the keep the follower inside the mag so i had to bend it so the follower could come out of the mag. also the modified 3d printed last round hold follower was slightly larger front to back than the oem follower so it won't move freely inside the mag. had to get some calipers to measure the difference. it was like 0.05" difference. got a dremel with a sanding bit and sanded of the back part of the modified follower so that it's the same size as the oem follower. now the last round hold open works fine now.

For a dollar its not a bad knife

Lock the slide back. You're making it more complicated than necessary.

I hope u r still around! I want to polish my son's HP22 and have never done polishing before. Do I keep putting little dabs of Mother's on the Qtip or just use it once? Do I change Q tips during the 1/2 hr of polishing? Sorry, silly old man questions but if I can make a mistake I will, haha. Thank you!

thanks!

I'm keeping mine a baby

It definitely looks cool

Good tutorial, i just ordered the gun and barrel!

Seriously? You dont turn it on? Whats the point of this????

This is the dumbest thing I've seen today

Ok

Thanks for this video helped me put my firearm back together easily!!

Step 1. unload your ammo, many ways to do this depending if your 10 or 10+1. It also depends if your safety is worn down enough to drop the mag in fire position.If not the trigger safety will have to be on. 2. Once mag and chamber are empty the mag must be in, and safety must be on "fire" to pull the slide back and lock it back with the trigger safety. Once in locked open position you can drop the mag if you want. (however you cannot drop the slide into battery without mag in.) 3. Once slide is locked back (doesnt matter if mag is in or out at this point), put the rear of the gun against your belly or chest and use both hands to manipulate barrel release forward while pulling up on the barrel. (its hard to describe this without pics). Baarrel should come right out and slide should remain locked. 4. So at this point you should have a full pistol minus the barrel (and the mag if you choose) in a locked back position. Simply put the new barrel in just as you would the old one. You should feel it click as you push down on the barrel if you have it all alighned correctly on the barrel pin. Once barrel is pushed down and flush you need to have the mag in( I like an empty mag) to drop the slide. 5. At this point everything should be back together. Rack it a couple times empty to make sure it stays together. Load repeat.

How's it holding up all these years later ? How many rounds down range ?

I wonder if the firing pin wears down from striking the chamber edge on an empty chamber because there is no slide lock to tell you it is empty?

Excellent thank you!

The ripping and the tearing

Is this from using high velocity ammo ? You can’t use high velocity consistently with this one , I think

Dont do this, the original poster hasnt responded in over two years, and lets face it, this will tear up your gun

4:39 impossible!!!! hate this faking gun, im gonna sell it so fast

Great tip thx

That looks like a nice lil pee shooter😊

No problems with mine

Im getting a threaded barrel for mine

Appreciate the video made it easy!