Can you put a video about how to make a bridge Rectifier for brushless Generator
@SKILFULLIFE14 күн бұрын
ok.
@brucefredrick420018 күн бұрын
Use a dc to dc converter. Get the one that operates at 2v and is variable output up to 30v. That’s if you have the current.
@kennthbrowne705120 күн бұрын
I build my own power station
@kennthbrowne705120 күн бұрын
very nice cool love it i build my own power station 1100 wats 110 v 60Hz 9A 12V Deep cycle battery 75A 900 Wats 6 way fused bloocked 250A fused 2 20A Breaker 2 110 AC out let two water proof cove 30A solar controlller switch to turn of my inverter and water prooof tool box 2 fan in my tool box
@kennthbrowne705120 күн бұрын
❤❤❤❤i build my own power station 1100 watts inverter 110 V 60Hz 9 A 12 volt 900 watts 12 volt decyle battery 75A
@MuhammadIrfan-tu7ff23 күн бұрын
keling
@KristofferMyhre-v7b26 күн бұрын
strange it take so long to charge. I put a peltier device and 2 hear sinks . added a small flame and hsd 4-5 volts in seconds and light
@alexanderzawydiwski9534Ай бұрын
What are you using for batteries?
@SKILFULLIFE19 күн бұрын
Deep cycle lead acid 12V 12A batteries.
@JK-Real-ScienceАй бұрын
Very nice video 🎉🎉🎉
@rjettforge26542 ай бұрын
What modules do you have on top of the capacitors
@Dahoodk2 ай бұрын
Is there any tutorial on these available
@rogercasasgames49072 ай бұрын
Tremenda kgda -10/10 y Zzz
@AmalgmousProxy2 ай бұрын
FYI: You don't need to pry off the screen covering the speaker to access the front screws. Just give it a twist and it'll pop right off. That stand. I have never seen one before. Went to look for one and they only seem to be in Canada. Oh well, thanks for the breakdown, this will be helpful when I go to put a usb C port in mine.
@hobbytech62602 ай бұрын
Not understand anything your video with music
@김봉준-u9m2 ай бұрын
팬이 어떤 제품인가요
@SKILFULLIFE2 ай бұрын
CPU cooler fan
@김봉준-u9m2 ай бұрын
@@SKILFULLIFE 너무 잘 만들었다. 감사합니다.
@garretwalenski82152 ай бұрын
Im going to be building something very similar. Excited to dive into and experiment. Nice build!
@liv2dive642 ай бұрын
Can't stand videos with music!!!!!!
@IM.B3 ай бұрын
U mf 12.58 not a dead battery mf
@lifeonearth41393 ай бұрын
What room size will match this?
@KennethNicholson19724 ай бұрын
how is it that the rubber unwinds so slowly? My old balsa rubber planes span the props so fast for about 3 seconds, lol. whats the trick here?
@SnowM1nАй бұрын
i believe big propeller is the key
@bmwbaker4 ай бұрын
It would be nice if you turn the music off and just a little commentary. It seems a lot of people, including me are curious about how all this works.
@sultanmulyono47814 ай бұрын
Tuan. Sircuit ini 5 capacitor 2 seri gabung. Bisakah untuk start mobil/ car.
@JTSF20244 ай бұрын
Samsung Galaxy Tab E 9.6 Used
@aufgespielt37684 ай бұрын
How can the rubber turn so slow? It’s amazing
@lionelhodges2264 ай бұрын
THE SO CALLED MUSIC IS TERRIBLE AND DISTRACTING ON THE INFORMATION THAT WANTED TO BE IMPARTED...I TURNED IT OFF AFTER I WROTE THIS COMMENT
@hafizzulqarnain53794 ай бұрын
why you cannot use a single bridge rectifier instead of using as many as piezoelectric?
@jovenciorafael98734 ай бұрын
Pangit lagatok ang tunog
@DKNguyen3.14155 ай бұрын
omg the rescue boat as police lights
@pejajordan46935 ай бұрын
(-_-;) so, just to make sure i got all this right ▶️ from my understanding, this portable outlet is 100% battery operated - correct? BUT, i WILL then NEED an outlet, to charge the battery used for the portable outlet - RIGHT? i'm needing+wanting this item, to charge my phone while living in my car(due to my car charging port being broken & also, THANKS FOR THIS VIDEO! you're oh so helpful. ~srry for my dumb qstions~ (⊙_◎)
@Z-Ack5 ай бұрын
I got one out of an industrial machine thats 6 inches around.. when i hook it to an amp it will hit much lower frequencies than the smaller ones.. i can also load it with how many watts i want without damage. It burns the wires off before anything happens to the thing.. i think it was used as some sort of acoustic tester in an assembly line with high speed product passing over it. There was also a laser on the machine that was directly coupled to the buzzer but i roasted it. Oops.. i was using it as a laser light show by turning the laser on and playing different frequencies to make all the shapes and stuff.. if you play that oscilliscope music on it the thing would actually display pictures and the animations on the sound track.. perty cool till a resistor failed and burned out the laser..
@skinner93995 ай бұрын
What did you put on the capacitors?
@SKILFULLIFE3 ай бұрын
balance board.
@ricardofranco41146 ай бұрын
I want to be able to charge the battery box in my car while im driving to my destination. How would i go about it ? I currently charge mine by opening the lid of my battery box, hooking up my charge controller to the battery, and charging it that way. But what if im out? How would i charge it with my car ?
@ricardofranco41146 ай бұрын
@JamesSmith-bj9vk thanks ! I'll look into it.
@TheOfficialDorianelevator6 ай бұрын
LOVE YA, i was trying to find ways to get these for cheap and you just taught me that salvaging exists, now i will just go to my local thrift stores and junkyards looking around and getting random crappy electronics to get motors, THANK YOU.
@danyd2137 ай бұрын
Ciao cosa usi come materiale trasparente del video è plexiglass o altro materiale? E dove hai procurato la molla? Grazie
@Corsair08297 ай бұрын
Nice rescue craft, but had a laugh at that 1st plane, it looked like a fish out of the water with all that flapping around 😂
@michaelalley37417 ай бұрын
Excellent demonstration much appreciated,thank you.
@Boomer.bloomer8 ай бұрын
nice choice of music
@user1j2h451h8 ай бұрын
I love this idea, its (in my opinion) quiet unique
@MacvainfoCrnaBara8 ай бұрын
Bravo! Treba napraviti da se pokreće nogama, nogama može da se ostvari veća snaga. Najveća energija ostvarena nogama je 430w i to u periodu od samo nekoliko sekundi, pokretanjem na nožni pogon realna očekivana energija je do 80w. Imam plan da napravim generator sa kondezatorima a da upotrebim motor od hoverdoarda.
@patrickryan61788 ай бұрын
could you explain the gear motor connected to the hand crank it looks like 2 different motors?
@SKILFULLIFE7 ай бұрын
There is only one motor(Dynamo), other one is a gear box from an AC brushless motor. You can see the rotor is still attached to the gear box. Both shafts are connected with an universal joint.
@patrickryan61787 ай бұрын
@@SKILFULLIFE thank you this makes more sense would you happen to have a list of parts for this project so I can recreate it for my class
@earthenergyhex8 ай бұрын
Do you have a website where you sell some of the stuff you build?
@earthenergyhex8 ай бұрын
Good video, but I need the parts list and wiring schematic so I can build one. Why post a video with no parts list, cost and so on? Instead of crappy music use your words and explain it to us.
@m.firizqiramadian7158 ай бұрын
how much power is generated for each generator?
@vinznearby43159 ай бұрын
My question: is that real time speed?
@SKILFULLIFE9 ай бұрын
yes.
@downey22949 ай бұрын
since the current is so small is it worth putting in a full bridge rectifier?. every diode contributes to a small voltage drop (0.6V to 1.2V).
@Zeddify9 ай бұрын
it doesn’t work when you press it that softly. needs to be with lot of force
@L3X3699 ай бұрын
you have a video right in front of you that disapproves your comment.
@zilogz80429 ай бұрын
can i put a votage amplificator to the output or a jule thief?
@SKILFULLIFE9 ай бұрын
You can use V amp, but it'll drop amps. You need a series of piezo generators.
@zilogz80429 ай бұрын
i was thinking that, a series of piezo generators with capacitors, all in series, thanks@@SKILFULLIFE
@Uru-o3g9 ай бұрын
Thank you for sharing this information. I am wondering how to connect it to a normal power supply without that car charger power supply.
@SKILFULLIFE9 ай бұрын
You can use 12V 20A power supply.
@josemedeiros0079 ай бұрын
Interesting video, but I would have preferred a verbal narration rather then the background music. Using repair mode probably raises the voltage level to 16 volt spikes like a Noco Genius 5 and 10 or CTEK charger uses when doing a repair or reconditioning, which can boil off electrolyte.