Goed geroken! Ik woon in het midden van het land 👍

​​@@CozyRC Haha ik ook ongeveer! Ik ben net begonnen met RC boten en ik ga dit proberen want dat lijkt me wel leuk :)

Thanks, I appreciate it! I'm making some mods on this one, so it will not be the average Shrimp rigger!

Thank you, I was planning that already! And I will narrow the sponsons with 10mm, too.

@@CozyRC Dont forget to add a turn fin.

Thanks, I won't! I will add some reinforcement in the sponson as well, before I close it.

@AdamEverythingRC That's a great speed for 3S, nice job! I use a lower kV motor, but who knows what I will end up with. ✌️

How did you manage to blow the prop shaft? I use the big far East website for almost all my parts. The video description contains the parts list of the hardware that I will use. ✌️

Thank you, Sakibian! I use the Flysky A3 receivers for years, and I really like them. I recently purchased the DumboRC DDF-350. It can't be beaten for the price, I think!

@@CozyRC Which Transmitter for Flysky?

Flysky GT2E, budget radio, but works great!

@@CozyRC I feel awkward withpistol grip 🥶

Yes, almost done! I'm Looking forward to the maiden run, too 😎

Thanks, Brenton!

Sorry, I should have added some explanation. It's just packing tape! I waxed it before applying the epoxy. It works pretty good!

@@RDM3DLAB Maybe not perfect, but I'm pretty happy with how it's turning out!

@scaleworksRC Thanks! The rudder is stronger and 50% lighter than the wooden version rudder. I wanted a knife blade rudder on this one to reduce drag 😎

@CozyRC I'd imagine you don't get very much flex with that thickness either.. very, very cool 😎

Yes, It's very strong 💪

@rcplaytime Thanks! It's so great to DIY build something.. I can only recommend it!

@H2oMechanic2RC Well deserved, you got some.serious performance out of your shrimp rigger 💪 Building 2 left / right sides happened to me before as well 😅

Thanks, Alex! Choppy water would be a different story, and the Mono would probably be faster, if the hydro stays on the water after all 😅

Nice! What setup are you planning to run?

Ready to run weight is 4kg exactly, with 2x 6S 4000mAh lipo

@@CozyRC hi Sir may i know how it is?

@@eymardmancil9514 Sorry, I don't understand your question. How what is? 😉

@@CozyRC sorry pardon..i am also asking how long is your boat?

It's 850mm long

Thank you for your recommendations! It's great to hear that a 3000mAh lipo might fit with a hatch mod. I will definitely consider it, as well as the carbon servo mount 👍

You're not messing around with your setup! Sounds great, but be careful ot to overstress the setup or boat. Looking forward to your video 👍

Hi Belas, that sounds good! This is a very nice hull to build and run. Enjoy!

Thanks, Dim! These are going to be 3 awesome little speed machines 😎

⁠Thank you so much for the giveaway present Jan and for your nice and kind words! You have been inspirational for so many hobbyists around the world and for me you have the most genuine yt rc boat channel which is based on the true spirit of rc hobby, ie sharing your knowledge and help other hobbyists enjoy this awesome hobby!

Thank you, Dim 🙏 If you love what you do, it's not hard to be enthusiastic about it. The video making and community communications became part of the hobby, and I really enjoy that, too!

Awesome! What kind of setup are you planning to install?

I am 62 years old and new to boats so I hope you don't mind but will probably copy your setup. Normal I fly sailplanes. But I need a change of speed to keep me on my toes 😂

I posted in your last video about doing a rigger. So this is brilliant thanks again for your channel and the time you put in to it

​@MichaelLing-bz4yq No problem at all, that's why I added the parts list in the description! Enjoy the build, this rigger will surely be fast enough 😅

I'm glad you like it, and I appreciate your kind feedback!

Well deserved, Daciu! You're one of the biggest RC boat lover I know 😄

​@@CozyRC o man the sound make all the magic on me, special the twin sound😊

I know what you mean! So nice to hear the aggressive high pitch noise of a twin drive boat flying on the water 👌

Hi Vinnie, yes I know. I got these in my Mini Mono. I went for the 80A, so I can run large props.

@@scaleworksRC ironclad rc has a 70mph shrimp rigger of this size

Nice goal! The JAE FE33 would be a great choice.

@@parkourrush3820 Nice one, Mylan! Is it also a Shrimp kit?

@@CozyRC yes it is the b068 gona be overpowering this one with a rocket 3450kv 2948 on 3s and maybe on 4 but i will maybe make a turn fin on it if the friend would like to but nog necassary

If you want to run ovals, you need a turn fin for sure. For just speedrunning, you can take it off. I will add a turn fin, because I want to run it in the small pond and set some fast laps 😉

Yes I do! Please send me an email at [email protected] ✌️

@@CozyRC ok

Email sent!

Thanks you, Mark! Yes, I'm very happy with this boat! I got it 10 years and it's still running strong ✌️

Danke schön! ✌️

Actually, the hydro has less friction I think 😉 Bottom line, they both are great fun!

@@kkkkkkkkkk421 it's clear I like speed 😎 Next build will be a rigger!

The Hydro is not my own design, so I don't want to sharebthe drawingfrom another designer, without his permission. That being said, you can probably find it online. It is the Hydromite by Doug Forrester. Good luck 😎

@@CozyRC thank you!

@mulheron97 Yes, there are ways to split the drawing into multiple pages, and print them with glue strips. That option used to be called 'poster' in Adobe, but probably other software can do that, too.

@@CozyRC Do you know how i would be able to tell the sizes and keep them matched up thats the part im very confused?

The drawing is A1 size, so if you print it as partitions in 100% scale, it will end up correctly!

@justcruzin01 Hi, I didn't het your email? Please contact me at [email protected] ✌️

That's right! A lot of fun, and I personally liked to time the laps afterwards, too. It gives some interesting insights! Even though the laps are not very accurate, you could see the hydro lap time decreasing as the lipo was draining. The next goal is sub 7 seconds with the net rigger build! 😎

Thanks, I agree! They're boat a lot of fun to run ✌️

Yes, it's very noticeable running them back to back. It has very little resistance, and it literally took me years to set it up like this. I don't touch the setup anymore, and it's a solid performer!

@@CozyRC Amazing work, my friend!

Yes, you're right! It' can all be explained by physics. The hydro runs on a cushen of air, lifting it out of the water. The mono has a V-shape, more like cutting the water and pushing it to the side.

Becomes a whole lot less clear cut when you give a mono a pad though, you can have it chop through rough water better, turn faster and tighter and reach speeds close to what a cat would

Speeds close to what a car would? What do you mean by that? This Mini Mono got to 53mph on 4S and a 2600kV motor. Not too bad, but I will go for 62mph with the carbon version I'm now finishing. ✌️

@@CozyRC sorry I meant to say cat, the t and r are next to each other and someone doesn’t check their writing

I think you're right, it could be improved still! First of all, the 3000mAh lipo is quite large. It would run already lighter with a 2200mAh lipo as I heard from others. Lifting strakes might help, especially in the corners. Maybe I should give the stinger some more positive angle to try. And finally, the prop makes a big difference, too. That being said, it does run fast with 76km/h. If you put both boats on a speed calculation sheet, the difference on efficiency is not even that big. The hydro is about 82% efficient, and the Mono is about 78%. I will definitely try to further improve it 😎

Adding strakes and a reverse chine could help, also adding a pad though that could prove rather finicky on a rc hull

The discussion about the strakes is indeed very interesting! But, except for triangular balsa strips (which I don't really like) I cannot think of any other method of building nice symmetrical and straight strakes!

Yes, balsa would be the most suitable. And indeed.. they're difficult to make! But... I have a project running in the background, making a 3D printed mold for the Mini Mono, including strakes!

🤩 that would be awesome!

Guess what.. my next project will be building 3 of the same riggers at the same time! 1 for myself, and 2 for the 3k subs giveaway 😎

Thanks, Mylan! It took me a lot of experimenting to find the proper setup. I will send you a photo of te turn fin. That is the most important part, in my opinion. ✌️