Lefty's Music

Пікірлер

@Vertigo2u Ай бұрын

Isn't it easier to route the audio out of the mc707 in tr? then you can control the volume via the external in knob on the upper left.

@KingzofSwing 2 ай бұрын

The dynamic duo

@roxfoot 10 ай бұрын

Very helpful thank you.

@iRideuWatch Жыл бұрын

I have a couple of smaller Trinity Brilliant cymbals and they are great. Much lower putch than you'd think.

@jjharmon8075 Жыл бұрын

great guitar playing

@leftysmusic5973 Жыл бұрын

Sold

@leftysmusic5973 Жыл бұрын

Sold

@leftysmusic5973 Жыл бұрын

Sold

@leftysmusic5973 Жыл бұрын

This guitar is sold

@tomaszandrzejewski816 Жыл бұрын

I have td11. I don't hear difrence in sound between 11 and 17 in stock sounds

@TheAndyCzech Жыл бұрын

Why do you prefer your 65 vintage over this 60s Strat? I'm debating between these two guitars.

@joefeinstein6804 Жыл бұрын

Just because it's used and beat up. The 60s was slightly better in my opinion but maybe the neck is too big for some. The new version II looks great.

@TheAndyCzech Жыл бұрын

@@joefeinstein6804 Thanks for the reply Joe. Yeah, I ultimately purchased the new Vintage II in white. It's supposed to arrive tomorrow. I agree w/ you that Fender did a nice job on this one!!

@rodmpereira Жыл бұрын

A rich man’s guitar.

@ET2carbon Жыл бұрын

These don't connect in the AIRA USB mode together?

@Peenutzz Жыл бұрын

Just wondering, I'm new to this stuff and have both, is it possible to run the mix out from the 707 to the TR8S ext-in so you have all channels available on both machines? And if so, which one should run the clock?

@leftysmusic5973 Жыл бұрын

Sorry - it sounds like my camera was clipping, plus you can hear a lot of string noise. It's not so easy to make a good sounding guitar video! But it's an amazing guitar in every way - they don't come better.

@leftysmusic5973 Жыл бұрын

Actually this one has a tapered case and is not nearly as heavy as other PRS cases!

@Flashback_Jack 2 жыл бұрын

I feel like I've lost my hearing listening to this video. Um, where'd my right ear go?

@SentientTent Жыл бұрын

It's lefties music, not bothies music

@MrBlueDux 6 ай бұрын

ur watching this from your phone sideways right?

@Ozterkvlt 2 жыл бұрын

i would rather get the ATV EXS-5 at this price point. This just looks and sounds like a cheap toy drum set IMO. If the sounds were better and all the pads and cymbals were 2" bigger, I would consider it.

@danlee8517 2 жыл бұрын

Hi Lefty, I see in this video you have TR8S volume set at full. I tried the same connection method and get distortion above 60% TR8S volume. Do/did you have any issues with sound quality?

@bogdaniv4432 Жыл бұрын

Same here. Anyone ?

@daemon3spade 2 жыл бұрын

Have you tried Drum-tec's Real acoustic sounds?

@devinstepp4205 2 жыл бұрын

ah i see what you did there, left channel mix lol

@_._minus_._ 2 жыл бұрын

Thank you for the explanation. What if I want to add TB3 to the setup? Where would I have to connect it? Can I sync all 3?

@DNGMaestro 2 жыл бұрын

Hey man, what stands are you using for both machines?

@Reeesegame 2 жыл бұрын

I guess you can also do this with a tr-8s an a Mc-101?

@angthekeys621 2 жыл бұрын

Hi, excuse me, I see, when you are on the metronome settings, metronome position selection set on mixout, is it possibile to move on phones? This is a very important function for me, I was looking for that on the manuals of the 101 and 707, but it’s written that position changes are possible only fbt or after efx. While the main function for the metronome should be to listen only through phones while mixout plays tracks. Can you pls add if on 707 is possible? Thks

@redeyedbuggers 2 жыл бұрын

I’m stuck trying to decide between this or the Yamaha DTX6K3. I like the actual hardware better on the Roland but I personally think the Yamaha sounds a lot better.

@jonathanwelch809 2 жыл бұрын

I'm in the same position. I'm so frustrated. I like the Roland cause the pads are larger to play with, but the Yamaha sounds alot more punchier

@redeyedbuggers 2 жыл бұрын

@@jonathanwelch809 I decided to go with the Roland TD17KVX. When I first set it up I was in love with the hardware, but initially I was disappointed with the sound of a lot of the preset kits. However after taking a lot of time to do some EQ & tuning the sound on some of them, I really do love this kit & I’m glad I went with Roland (although admittedly I don’t know if I would have liked the Yamaha better). I also bought a couple sound packs from Drum-Tec & Edrum Workshop & man did that make them sound soooo much better. If you do go with the Roland I highly recommend buying a couple of those sound packs because they really make a huge difference in my opinion. Good luck brother!

@jonathanwelch809 2 жыл бұрын

@@redeyedbuggers thanks man! Glad it worked out for you. I think I'm actually gonna go with the Alesis Strike Pro SE. It has some amazing sounds and you get an extra tom and symbol. More expensive but after doing the research I think I'm content with it. Surprisingly I'm a guitarist and have played for 17 years, but now I wanna learn the drums 😁

@redeyedbuggers 2 жыл бұрын

@@jonathanwelch809 let me know how it goes dude. I was considering the Alesis Strike Pro SE but I needed something more compact because my family & I travel a lot. Probably would have opted for that one if I wasn’t moving all the time.

@lwpweb 2 жыл бұрын

thats great to go dawless, i'm more related to small size devices having a tr-6s and planning additonal a mc101, later i think about to make an aggregate device of 2 x TR-6s for having a 12 channel drum maschine. Love to have these devices all with batteries and smaller foot print.

@yqsl7726 3 жыл бұрын

How to make side chain in 707?

@cthlos 3 жыл бұрын

This is what mixing panels are for. If you can drop a couple of grand on some higher end synths, spend an extra $250 on a decent but mid-level mixer. You will be glad you did.

@ET2carbon Жыл бұрын

They make the MX1 for that, it actually controls the AIRA system too

@BlueHawk80 3 жыл бұрын

Did Roland fix that volume "thing"? Sounds super annoying to adjust that every time. I Have the MC707 and eventually would like to add the TR6S...

@Venomousbehavior 3 жыл бұрын

What kind of mono mix out cables did you use?

@AlexFainDj 3 жыл бұрын

You can also add 2 external instrument in the audio in mono of TR8S and got 4 hardware without mixer, connected together. Super .

@rolandedrummer9723 3 жыл бұрын

Thanks for the demo. If I could get a hold of the 26" bass drum kit from the new yamaha dtxpro loaded to this it would do about any music.

@davidvochocjr1005 3 жыл бұрын

I shall test how to reflect it in the DAW - it seems like the TR-8S is in one channel (what I would like to have)

@fernando-bondedstripes2773 3 жыл бұрын

Sooo helpful. I did it backwards. The EXT IN + Value Knob up, thanks and my midi is backwards. ♥️ Can't wait to get back home 🙈

@milosvelickovic2512 3 жыл бұрын

Why can't I hear the sounds from tr8s then? The strokes are shown on sequencer, but no sound? Thanks!

@EdwardWallace-f3k 13 күн бұрын

Did you figured that out, I have the same problem ,thanks

@OscarGonzalez-qv2sx 3 жыл бұрын

kick muy feo.. la yamaha dtx452 tiene unos kick espectaculares

@w1zardssleeve 3 жыл бұрын

Thanks, been hunting for this!

@jona_KardCiv1 3 жыл бұрын

You should run your bass line to assign out, into your kick, turn on the sidechain compression effect on the bassline. Send it to the mix out on the TR8-S.

@chriscrowder3844 Жыл бұрын

Hi to help me put so the bass line is on the mc707 so you run just that out I'm lost

@chriscrowder3844 Жыл бұрын

I'm lost can't figure out exactly what machine goes in and out. Please help its driving me nuts nor knowing how to duck the bass of my 707 with the kick

@jona_KardCiv1 Жыл бұрын

@@chriscrowder3844 You can route out in mono or stereo. You just have to menu dive in the 707. On the TR8s you have to tell each kit how to handle an external input. Underside Ext In -> side chain. Its difficult to explain by txt

@chriscrowder3844 Жыл бұрын

Are you saying also to have the mc707 main out also going into the tr8s rather than the tr8 outs to the 707?

@jona_KardCiv1 Жыл бұрын

@@chriscrowder3844 No. The 707 has a pair of sends. So basically you route the audio out of the 707's sends, to the TR8s Ext In via cable The 707 also has internal routing options I believe. You can also route more than one channel to the sends out jacks. Lots of flexibility. It was a burden of choice for me. If you are going for the bass pump effect. You only need to route mono. No effects. You can apply effects in the TR8s and have a tighter sound.

@PHOENIX-fb1cf 3 жыл бұрын

I would like to have your opinion on a techno / trance set. I don't want to go through a computer anymore I was planning to buy an Analog Rythm MK2 and an Analog Four MK2, as well as a Roland MC 707 and TR 8S and for the bass line a mam mb33, this way I will have a varied sound palette. What do you think ? Thank you in advance for your response and advice.

@node100101 3 жыл бұрын

Helped me figure this how to connect my tr8s with mc707.. Such videos go a long way to helping others. Thank you for that mate!

@ugentu 4 жыл бұрын

Looks like there are two major drawbacks: 1) When you stop 707 - you have 8s also stopped. So no smooth transitions between 707 projects 2) You are stilling 2 tracks from 707, which is HUGE. If count only voices - you a taking x2.5 sounds count you were able to produce on 707's two tracks taken.

@surf_machine 3 жыл бұрын

how about just connecting the main out of 707 into the ext in of the tr8s. in that case u can let the tr8s play while switching projects on 707 and you don't lose tracks on the 707 if i get it right. just ordered my 707 :))

@AcidTechnoMan5000 3 жыл бұрын

Nowhere in the video does it mention utilizing 2 tracks on the 707

@tricks-and-tips 4 жыл бұрын

Thanks for making this. One more question : what stands are you using?

@tricks-and-tips 4 жыл бұрын

Thanks man! What kind of USB cable did you use? Might be my lack of searching skills, but I can't find a b <> b cable from Roland (or any other brand) PS, I subscribed to your channel, would love to hear you perform both :)

4 жыл бұрын

I think there is no usb connection. Classic midi cable and stereo Audio cable (jack)

@ET2carbon Жыл бұрын

@ they are AIRA USB

@ET2carbon Жыл бұрын

He's using MIDI 5Pin DIN in this arrangement

@VK3FADU 4 жыл бұрын

Will this work the same with a Tr8

@tricks-and-tips 4 жыл бұрын

Thanks for the video! I have been looking for this, but only found one reference in the update documentation of v1.20. Is there a precount function for the metronome other than with the sampler? So you get x clicks before the actual sequence starts? This would be super handy in a live situation with more than one people that listen to the metronome as their click track. Also it would be handy for recording your patterns (so you are in sync with the tempo when the actual recording starts).

@haatock 4 жыл бұрын

Hi can I connect a Jupiter X if, how ?

4 жыл бұрын

You mean you want to connect jupiter x to mc-707? Same mentality i think with Classic midi out from mc-707 to jupiter x midi in. Then jupiter x stereo out jack to mc-707 ext-in. But i dont know how it is possible when you press mc-707 start button , it will also trigger jupiter x i arpeggio for example?

@evankeal 4 жыл бұрын

I like 1, 4 and 11.

@serkankoc3805 4 жыл бұрын

Sorry but my ears and eyes are bleeding

@MrLewisb11 4 жыл бұрын

If recording to single channels in daw?? Would you plug both in to Mac with usb or would you need something else??

Ең жақсы KZbin

Пікірлер