Wall Tools

Пікірлер

@tonyosborne3924 8 күн бұрын

I've had a blue line taper for 26 years the way I've always cleaned mine is just to take the head plate off ( 2 screws) and blast any cement out of it with a hose pipe A lot easier than taking the whole head off . Always worked for me you get absolutely soaked doing it so it's my last job of the day. One comment here says that the taper looks like cheap junk , speaking personally My Blue Line taper is still smooth and has never let me down.

@satturatedphat 9 ай бұрын

18-20 millimeters?!?! That's almost a 3/4 inch layer!!! Good lord no....

@12pharro 10 ай бұрын

Um…. How about 20 mils instead of 20 mm lol

@newchapterjesse Жыл бұрын

Anyone that thinks spraying can be level 5 coating is a idiot are the ones sitting not working. If you want to get a good level 5 coat. Its hand skimming from up and down than to side by side.

@danmittler6321 Жыл бұрын

Just curious what level is s piece of drywall before it is taped

@danmittler6321 Жыл бұрын

If someone tells me it's a level 4 then drywall companies should make level 5 drywall and someone will make millions

@adisworld3255 Жыл бұрын

Wow, apply it 20mm thick? That’s almost 1 inch. How do you get it that thick with a sprayer??

@rawcus918 2 жыл бұрын

This guy is just reading another paint companies website. Word for word. Level 5 should be trowel applied skim coat

@garypostell5268 2 жыл бұрын

Interesting indeed thank You 🙏

@geoVLN79 2 жыл бұрын

How do you take the handle off??

@basharyassin7091 2 жыл бұрын

How 20 mm thick this is 2 CM it is almost an inch, What MM we are talking about here

@Skrimpish 2 жыл бұрын

If you are spraying, MOP the walls down with a 24inch microfiber style mop slightly damp. It clears the dust for a better result

@bibo3373 2 жыл бұрын

“18mm to 20mm thick”, that has to be a misstatement?

@kilomancer 3 жыл бұрын

try hand trowelling all that

@mattblatchley2061 3 жыл бұрын

240p?

@johnmcvay2627 3 жыл бұрын

Really guy didn’t even use channel locks correctly!!

@petergriffin1546 3 жыл бұрын

To fix the new plaster walls can you apply this to new plaster walls before the first water mist /emulsion coat?

@sophiabarbosa3522 3 жыл бұрын

It’s not the walls smooth

@jag8901 3 жыл бұрын

18-20 mm thick LOL - Right !! 18 -20 Microns pal

@justpaintitright6442 3 жыл бұрын

love this video

@mattmccaughen8082 3 жыл бұрын

Dear God just put the mud on twitch your knife and take it off why are u adding more steps dude you would take forever to clean

@wildwoodtop 3 жыл бұрын

so if you had a helper you could have longer strips?

@shawnmasterson8655 4 жыл бұрын

It's amazing how incompent you make this guy look. It's a lot easier to set a door or window if you first frame the opening.

@cosullivan1357 4 жыл бұрын

18-20 mils not mm. O

@125606angel 4 жыл бұрын

This is to much work I have a product that I can spray iup to 150 gallons in 45 minutes. And make thousands. This is to slow and to much work.

@squeekhobby4571 4 жыл бұрын

Well explained. Can you also recommend the best sprayers for a diy project

@frankharo1437 4 жыл бұрын

Why not three coat all the joints and use a good drywall primer

@micxploed 4 жыл бұрын

awesome product, horrible ear rape music.

@jaemanzo1036 4 жыл бұрын

GO Alejandro

@markbenson5168 4 жыл бұрын

TRUMP owns 2020!!!!

@rolandgrz1975 4 жыл бұрын

Amateurs

@raydreamer7566 4 жыл бұрын

Please give me a Wedjji ! ! !

@julianarchuleta2830 4 жыл бұрын

This dude taped seams before butts 🤦‍♂️

@billykkutter 4 жыл бұрын

I always used leftover tan latex paint to mix in the mixture. Actually used 3 mud to 1 paint. Or about 1 gallon paint for 3 to 4 boxes of mud. This makes it really easy to see any areas that need touchup and after sanding and feathering the edges of the touch up with a wet sponge, you will always be able to spot prime with ease. This method was used on many multi million dollar resort homes in Big Sky Montana.

@NexusCapital 3 жыл бұрын

Are you able to sand with this mixture?

@billykkutter 3 жыл бұрын

@@NexusCapital Sanded all walls and ceilings two directions. Sounds like a lot of work but use 180 or 150 grit and it is really fast and easy. Not a lot of grinding, just a little pressure and do about 6 ft length then backtrack the other direction. The painters love the finished product.

@NexusCapital 3 жыл бұрын

@@billykkutter I dont mind putting in the work to get a good finish. Thanks for the tips. Are you using a Mark V pump for heavier stuff like this?

@williamferguson7234 3 жыл бұрын

How did you "bust out" the butts?

@billykkutter 3 жыл бұрын

I used a 15 inch cement trowel and layed 3 wide with a smooth pass down the middle just above the tape. Then on the final I would do the same and sand smooth. Sometimes I had to build up the low side even more.@@williamferguson7234

@avgjoe-cz7cb 4 жыл бұрын

A simple thank you is required...great tips.

@lanceladue2818 5 жыл бұрын

Why are people trying to make cheap spackle joint compound finish into a quality finish...no matter what anyone does it's been proven to fail in 5-10 years...just basecoat finish plaster for quality...

@SpYucaipaSoCal 5 жыл бұрын

Great taper video. Probably the best there is. Thanks for taking your time with the steps and issues and why they happen. The oh ya light came on a few times while watching this. With you’re help next job will be less frustrating.

@Helterskelter4 5 жыл бұрын

Why not use proper plaster, not drywall mud? You guys really need some British Gypsum Multifinish over there in the US.

@pennyglisson4450 2 жыл бұрын

can u fill me in ? I’m listening? I want to know what ur saying ? i can google yes but this is interesting to where i want some 411 from someone who knows what’s up ????

@williamenthof3020 5 жыл бұрын

They look like cheap junk. I can clean my tape tech gun with a garden hose faster the you can take this thing apart.

@PedroSanchez-pr5nr 5 жыл бұрын

Would you recommend,or is it possible to spray a smooth texture on walls that’s already a knockdown texture ceilings are anywhere from 20 to 25 ft

@deputyja1 5 жыл бұрын

I did it today and do a couple jobs a month

@williamferguson7234 3 жыл бұрын

@RiverSLV 2 жыл бұрын

That’s spending a ridiculous amount of time and money to make it not look much better knockdown is easy to touch up and matxh

@frankharo1437 5 жыл бұрын

That's not a level 5 finish a level 5 is a smooth coat a level 5 goal is not to be able to see your tape joints priming is done by a painter not a drywaller what a joke