I have a 2013 g37x. So can I just buy rwd control arms and then buy the little seat. Is that really the only difference? Because the rwd control arms are much cheaper, and they have more manufacturers to choose from than ones that are awd 🤔
@Gm29_mtz9 күн бұрын
You may be on to some , I wouldn’t know 100% but ik that the wheels bearings are interchangeable, so maybe control arms are Interchangeable
@DiegoRodriguez-ct1tn12 күн бұрын
My car don’t start it is one blown hopefully tm when I replace it all goes perfect
@Gm29_mtz11 күн бұрын
Did u get it fixed?
@DiegoRodriguez-ct1tn11 күн бұрын
@@Gm29_mtz yea it starts now
@mauricebrand227120 күн бұрын
Bro I have that car right now, why you didn't leave those headlights on the car?
@Gm29_mtz20 күн бұрын
They didn’t fit with the bumper
@thatniqqakevin64421 күн бұрын
you think we could put washer all us awd low people
@Gm29_mtz20 күн бұрын
What does that do? I’m not too informed
@spawndemon9126 күн бұрын
Thank you so much. Ran into this problem and had to stop half way through. Can't drive my car until I finish, so gonna try this out. Appreciate it 🙏
@Gm29_mtz26 күн бұрын
No problem , glad the video was helpful
@EveryThing-no4isАй бұрын
Bro the bottom clamp won’t come off 😫
@Gm29_mtzАй бұрын
Cut off the hose
@diamantedejesusАй бұрын
Is it the same thing with m35 06
@Gm29_mtzАй бұрын
Shoulda be similar
@musicfashionstyle4251Ай бұрын
Can i use it to negative battery terminal
@Gm29_mtzАй бұрын
Maybe, if u remove the fuses
@kayr4657Ай бұрын
Is this the same on a 370z?
@Gm29_mtzАй бұрын
It’s the same just different part number
@kratospakstanmobile4382Ай бұрын
Cuantos litros se le pone cuando se le cambia nuevo
@Gm29_mtzАй бұрын
Yo le puse 6 litros
@aureliomontoya8197Ай бұрын
Man fuck those oem clamps
@Gm29_mtzАй бұрын
Yea they can be annoying
@fernandojose2241Ай бұрын
Question: Does that piece with the sleeve work for a 2004 Nissan 350z?
@Gm29_mtzАй бұрын
I think it’s different
@CuervoPАй бұрын
Is it the lower arm or upper arm if it makes my steering wheel shake?
@Gm29_mtzАй бұрын
Could be your CV axle
@dronesharassingus8564Ай бұрын
Cpuld be your tire too
@CuervoPАй бұрын
@@dronesharassingus8564 no not my tire prolly is my cv axle
@dronesharassingus8564Ай бұрын
@@CuervoP cv axle shake only when accelerating, when forcing the piece but when letting gass of dont really shake bro
@dronesharassingus8564Ай бұрын
@@CuervoP but cv axles are cheap like 80 per piece aftermarket too
@Mik35959Ай бұрын
Doesnt look very low either.
@Gm29_mtzАй бұрын
They suck too.I switched back to shocks from rockauto
@Mik35959Ай бұрын
Why do some come with the extra spring it makes Me wonder what is actually proper
@royrodezno2563Ай бұрын
Did you have any sluggish acceleration issues? I think my fuel pump went out yesterday but was having super sluggish acceleration then my gas pedal stopped doing anything. Now wont start, will crank.
@adanlopez1011Ай бұрын
I’m having sort of the same problem here. Sluggish acceleration, usually have to press it from the top of the pedal to get to go somewhat, When the tank is less than half full it risks itself shutting off. However I’m also getting a p0430 code which is a bad cat code. But I’m hoping this is just a leak, and not a full cat replacement. Or it may also have to do with the fuel pump since it is running pretty lean. I have a 2013 g37x and I’m getting 21 mpg with city driving, but the car feels really sluggish and hard power steering as well
@Gm29_mtzАй бұрын
It sounds like a fuel or air problem your having , spark plus or fuel pump?
@royrodezno2563Ай бұрын
@@Gm29_mtz Im thinking the same, I ordered a fuel pump in so we will see.
@adanlopez1011Ай бұрын
@@Gm29_mtz Yeah, pretty sure it’s fuel pump as well. Sigh this is a $400+oem part or 300 from a quality aftermarket. Fuel pump shuts off once it’s is dry, and not submerged in gas anymore hence the stalling at half a tank, once that is fixed I hope that p430 goes away.
@Gm29_mtzАй бұрын
@@adanlopez1011 I purchased mine from autozone and it’s 2 been yrs holding so far
@unknownhumanbeing2464Ай бұрын
Do you know where I can find a replacement 22mm nut? I’m replacing my lowers but the original nut was seized on the bolt so I had to cut it off.
@Gm29_mtzАй бұрын
Infiniti parts deal or z1 motor sport
@Gm29_mtzАй бұрын
Contact z1 customer support they will help out within same day
@Gm29_mtzАй бұрын
40262-EG010 is the part number for the nut
@omonge582 ай бұрын
Was this an awd?
@Gm29_mtz2 ай бұрын
Yes
@omonge582 ай бұрын
@@Gm29_mtzur amazing im bouta do this all the other videos looked so confusing
@jeffreed84252 ай бұрын
yeah very good video dude. thanks for your time and effort
@Gm29_mtz2 ай бұрын
Thanks No problem
@oofscar97552 ай бұрын
De donde lo compro el assembly puede caber en un 350z 2008?
@Gm29_mtz2 ай бұрын
Nissan parts deal
@Gm29_mtz2 ай бұрын
Es igual
@frostyy12082 ай бұрын
so i have an 08 g35 and my bumpers kind of cracked, so i was wondering, what type of g37 bumper does it have to be? there are literally 0 aftermarket 08 g35 headlights so a different bumper would allow for more options right?
@Gm29_mtz2 ай бұрын
Yes, with a g37 sedan 10-13 bumper u can install after market headlights
@frostyy12082 ай бұрын
@@Gm29_mtz no need to buy different fenders right? they fit my 08 fenders?
@Gm29_mtz2 ай бұрын
Nope , you can use the ones you have on
@AlejandroTorres-bl2kb2 ай бұрын
Why dis you replace it? What sound did it make?
@Gm29_mtz2 ай бұрын
No sound , just wanting to replace old lower control arm , if u have noise check your CV axles
@hunterclarke4382 ай бұрын
I can not get the Fuse box out at 3:30 , all you have to do push on that clip and pull it out?
@Gm29_mtz2 ай бұрын
Push the tabs in , and slide up
@josechavez67152 ай бұрын
Where did u get the boot from
@Gm29_mtz2 ай бұрын
From the website Infiniti Parts Deals
@NOUBSTA2 ай бұрын
Thank you bro!💪🏾🫡
@NOUBSTA2 ай бұрын
Do you get rough idles & poor acceleration from this leak?
@Gm29_mtz2 ай бұрын
It did have Poor acceleration, it for sure restored some power after installing
@brianbajo3 ай бұрын
What’s your Instagram bro? I have a question about them
@Gm29_mtz3 ай бұрын
Gm__mtz
@flipmode003 ай бұрын
Great work.
@Gm29_mtz3 ай бұрын
Thanks
@SportsMusicCars3 ай бұрын
the bolt that holds the arm to the knuckle was a tiny bit loose on our '12. Pretty sure the lower ball joint is what is giving the wheel play and clunk over bumps however.
@Gm29_mtz3 ай бұрын
Have you inspected your CV axles? They could be the ones making clunking noise
@SportsMusicCars3 ай бұрын
upper is soo much easier than the lower!!
@Gm29_mtz3 ай бұрын
Yea it’s a 30 min job with the right tools
@dronesharassingus85643 ай бұрын
Bro do tou know what size bolts go in it. I bought g35x with no mount on it
@Gm29_mtz3 ай бұрын
14mm if i remember
@dronesharassingus85643 ай бұрын
@Gil_mtz and how long bro, appreciate btw.
@1hunnid4193 ай бұрын
How did u get the tire aligned
@Gm29_mtz3 ай бұрын
Alignment shop
@alexandergonzalez3333 ай бұрын
@@Gm29_mtzWhat’s the way u said u did it urself?
@Gm29_mtz3 ай бұрын
@@alexandergonzalez333 I messed with the tie rod alignment but for the camber alignment I took it to the shop , with adjustable control arms you can prolly do it yourself without a shop
@stopher19713 ай бұрын
Were you getting a dull knocking noise on the inside of your cabin on the passenger side?
@Gm29_mtz3 ай бұрын
It’s been a while I don’t remember tbh , but are u getting the noise at idle?
@stopher19713 ай бұрын
@@Gm29_mtz yes, after the car is warmed up, and then you shut it off and restart it a half an hour later I’ll hear a knocking sound on the passenger side. It has something to do with the system when I pop the hood and go to the purge solenoid and squeeze the hose between the solenoid and the intake the pulsating stops.
@Gm29_mtz3 ай бұрын
Yea it’s better off to replace it , u may have a leak , after I replaced mine I noticed a difference in power aswell,
@youngchristian45403 ай бұрын
How to you put the cover back on
@Gm29_mtz3 ай бұрын
It snaps back on when you press on to the hose
@youngchristian45403 ай бұрын
@@Gm29_mtz thanks, it took me hours to do it but your video helped me I’m not a mechanic
@JC-rs9ln3 ай бұрын
I had an accident not long time ago air bag deployed and light is on,i know air bag light cant be reset but my horn is not working any more. I hear the click sound on horn relay but no sound
@Gm29_mtz3 ай бұрын
It’s gonna be your clock spring
@ethanstone59783 ай бұрын
Can bad fuel dampener cause bad weird shaky idle and stalling of the car or even loss power of acceleration??
@ethanstone59783 ай бұрын
Like i need help i been trying to figure this out so i dont buy oarts i dont need
@ethanstone59783 ай бұрын
I been wondering too does a z have a fuel regulator??
@ethanstone59783 ай бұрын
Ome more thing to bug about can it cause a long crank
@Gm29_mtz3 ай бұрын
I did remember from my experience, it seemed to gain power back after replacing the leaking hose I had , also I’m not sure if the Z comes with a fuel pressure regulator but Ik z1 motor sports has aftermarket for the Z , and the long crank could be the starter im not sure tbh
@RidingwithJayx2 ай бұрын
Crankshaft sensor causes a long crank and eventually stalling at low speeds or going in reverse! Just happened to me replaced it all good. @@ethanstone5978
@DanielGutierrez-hv6ld3 ай бұрын
Thank you Gill
@Gm29_mtz3 ай бұрын
No problem
@Mik359593 ай бұрын
Hoping someone sees this and knows. I have checked the nicoforums manual but not getting clear info. What does the brown terminal go to on the positive cable
@Gm29_mtz3 ай бұрын
Are you talking about the two connections that go into the fuse holder I installed in the video? The brown goes to the starter and the other goes to the alternator
@user-hv4qr3ek2b3 ай бұрын
Would changing JUST the boot work in the end?
@Gm29_mtz3 ай бұрын
I did just the boot 1 time , and the next time I went to check on my spark plugs the boots would come apart and it was making the car act up
@user-hv4qr3ek2b3 ай бұрын
@@Gm29_mtz thanks for the info vro 👍 I’m bouta do my front sway bar bushings that i’m getting from AutoZone you got any word on those?
@Gm29_mtz3 ай бұрын
Those should do the job , lmk how it goes
@dadecountyfastboyz53793 ай бұрын
Does the same part fit for the G35 and the G 37 motors
@Gm29_mtz3 ай бұрын
Yes sir , but only the 07-08 g35 with the vq35hr coupe and sedan
@luisguijosa38764 ай бұрын
Do you have to buy a ball joint seat? Or does the old lower control arms have the old one there ?
@Gm29_mtz4 ай бұрын
The old one comes with it
@alikariem5922 ай бұрын
What's the party number on the new seat?
@Gm29_mtz2 ай бұрын
@@alikariem592 40173-EG000
@RicardoB.Alvarez-yz8ru4 ай бұрын
Why did you replace them was it making a noise?
@Gm29_mtz4 ай бұрын
They are the original from my car from 2008 and tbh I just wanted to put new ones , I have clunking in my car and I thought this would do it , but it didn’t make a difference
@RicardoB.Alvarez-yz8ru4 ай бұрын
@@Gm29_mtz is the clunking noise coming from the front or the rear & does it happen when you put the vehicle in reverse or drive?
@Gm29_mtz4 ай бұрын
@@RicardoB.Alvarez-yz8ru from the front, and it’s usually when I’m reversing and turning the steering wheel to the right, I get a bad hop/clunking
@MeHIcO963 ай бұрын
Try replacing your transmission mount. Had the same issue and so far doesn't make that cluncking noise and drives way better. I went with z1motorsports transmission mount.
@Gm29_mtz3 ай бұрын
@@MeHIcO96 I have an Awd , the transmission mount is different with Awd and rwd, I’ve replaced mine and you are right it makes a difference in vibration and noise , but my problem is gonna be both front CV axles , the AWD has problems with the front CV axles failing
@Matthew-ib8bm4 ай бұрын
So all you had to change was the bulb for the reverse housing? Just ordered mine
@Gm29_mtz4 ай бұрын
They come with bulbs , you can change them and put whatever bulb color if you want
@JaidenStylezTV4 ай бұрын
Cab you do a video on how to remove both sude engines mounts
@Gm29_mtz4 ай бұрын
Okay , I’ll upload that next
@Gm29_mtz4 ай бұрын
Just uploaded it
@evegtrrz284 ай бұрын
Que parte se ocupa cambiar ? Tambien me esta pasando eso pero nose si ocupo todo la linia or nomas el pedaso chiquito que tienen en auto zone
@Gm29_mtz4 ай бұрын
Es mejor compra todo el assembly, es difícil de quitar esa pieza de la manguera , todo el assembly cuesta como 100-120 con shipping y no es tan difícil de remplazar
@Gm29_mtz4 ай бұрын
Ve ah esta página donde te venden partes originales por buen precio. www.infinitipartsdeal.com
@tonytodieguez50775 ай бұрын
Gracias por tu canal es bueno saludos
@Gm29_mtz5 ай бұрын
💪🏽💯
@jaygotta405 ай бұрын
don’t do this after a while your messing up the engine if engine cuts out mutiple tine
@Gm29_mtz5 ай бұрын
It was my fuel pump, got it replaced the same week I uploaded that
@mikeythakid5 ай бұрын
just save ur money and a buy a roll of carbon fiber vinyl. these cheap vinyl kits are cooked 99% of the time before they even arrive, and fitment is dookie. 🤞
@Gm29_mtz5 ай бұрын
Yea it is cheaper if u buy a whole sale roll of wrap but so far mine is holding up 3 months in