شكراً والله ماقصر الريال ساعدني 😂🤍

Hello, to replace the plastic covers , do I need to do all that , or they are just clips to be removed? ANYONE!

Did you end up putting it back together?

Daaaaaaamn! 😃

Thanks for making a video that showed how to do absolutely nothing

Clear scan tool, remove #3's coil, pick any other coil and remove, exchange to removed coils and run engine. If issue moves to other cylinder, coil bad...or just replace #3 if there is no money. no need for additional expense to replace functioning parts at this time if they can't afford the diagnostics.

This is why we stay away from bmw

Damn that hurt to watch the plugs get ran down with an impact, hope it wasnt an aluminum head

You didn't like that customer. They were rude to you, I can tell. Why I say it? Cuz launching plugs down the holes AND starting off plugs with power tools is a no-no. LOL. ☠️

Nice video man. Any updates?

The title mechanic is being able to diagnose/find the problem, not just swapping out parts 😂, thats awesome dude the other guys must not have been that observant, nobody must have followed the wires either 😂😂

I once read a story from an auto body technician who had someone come in as the shop was closing, with a huge dent in their door, I believe. The tech quoted the customer $200 over the phone. When the customer arrived, tech told him "you pay me for what I know, not what I do, right? Just want to clarify that," before pulling off the door panel and smacking the dent out with a rubber mallet. It may only be a 10 minute job for you, but if you're the only one who can do it, that 10 minutes is invaluable.

nice job (pun)

Is that not your secondary air intake pipes

I'm in northern cali, and I for the life of me do not know how these people are getting tags with modified cars. I'm certain there is a plug . I just can't find it lol

When they don’t get a diagnostic and just give us parte to install and they end up not fixing the problem 🤡

That’s backwards

jesus did they really have to hide it like that?! who in the world programmed this crap, please replace his job with AI.

Thanks alot big thumbs up for the info spot on

Best maintenence is to avoud them

Say bro I went and did this today and was TRIPPIN LIKE YO AND THATS THE SAME PICTURE I WAS LOOKING AT , salute to you my guy, I did what you said and BOOM . Worked 🎉 you deserve some tacos

Tell your customer he bought the wrong ones. They are supposed to be two o2 sensors at the merge not up top. It will not read correctly.

20 min easy job no extensions needed. you have to remove grill, 4 screws to the grill

Worked very well thank you Usually i replace the radio or solder a new potentiometer I now have a 2021 versa 40k miles. I see we have the same radio. Must be a common issue Thank you much for the easy cheap and quick fix idea

Least helpful video I've seen today on this task. Further to the point neither you, or anyone else, wants to actually show the removal or, more importantly, the installation. Who's thus video for?

Unfortunately this did not resolve the issue. I tried multiple times. Any other suggestions?

1st shop should be sued they lied to that poor person and didn’t even repair that shit

Thank you that is my problem car

I made the same mistake 😅

Ty so much for this!!!!

I heard that those Gasket only last about 2 months , and they are not Honda parts, you need to buy the whole part for like 220 is that true?

The first mistake was taking it to an independent shop while it’s under warranty.

Thank you!

Thank you Dodge for making another shitty design. I am so sick of crappy designs from this company.

Good video what grill do u have?

Bravo

Thank you🎉. It works on 2022

😂😂😂😂😂

Stupid 🙈

12/14/24 this fix still works! Thank you man. Was about to take it to the dealership, but decided to research first and I stumbled on your video. In our case, the lift gate would open fine, but when we hit the button on the lift gate to close, it would start to close and then immediately stop and go back to fully open. It was almost like something was in the way triggering the sensor. We spent weeks if not months thinking there was an obstruction such as something in the trunk hanging past the boundary, or us somehow standing in the way?!? Nothing ever made sense. Anyway, we determined it definitely wasn’t an obstruction, but were not able to diagnose the cause. Saw your video. Went to the menu and turned the auto lift gate (PBD) function off, then back on. Then changed the height adjustment. And now it works again. Will come back if the symptom returns. 2022 Platinum Highlander V6.

Sweet Hyundai civic

You don’t even know what car you’re working on

Should have used a plastic welder to make it stronger and then used the washers. But i do hate european plastic in cars it cannot handle the heat here and gets very brittle.

That oil cap breather isnt helping

Catch can is legal. Looks legal to me

Where’s the civic

That's a Hyundai....

Now this wud not happen in a ford

that is why todays cars are nothing but problems and its not even a mechanical issue,,,big money for this problem

That is a brake shoe not pad.