How to do I lock the safety on the black jack stands
@DonaldG-qq4ol15 күн бұрын
Nice presentation, thanks!
@tracystephens5014Ай бұрын
I tell ppl to buy these ratchet wrenches over everything else. I've hit these with a 2lb & beat the piss out of them for yrs now. I've had Blackhawk, RockRiver, SnapOn, Craftsmen, etc fail with hard use. I understand the lifetime trade-in but that doesn't help me when I'm on the job...these just don't fail. Haven't had to replace a single one yet & they have been put through hell.
@cashstaples66Ай бұрын
Where are you located
@SlowZX2Ай бұрын
Thanks for the video Roy 🙏🏼
@royzcustomzАй бұрын
You are welcome
@SlowZX2Ай бұрын
@@royzcustomz I've never touched the engine- apart from valve cover gasket replacement. So this video is very helpful as my headgasket blew a couple weeks ago. Thanks again
@royzcustomzАй бұрын
@@SlowZX2 glad to be of help
@terrysibley9636Ай бұрын
Well that's just some bullshit. Over engineered nonsense.
@royzcustomzАй бұрын
Yeah, that's alot of work just to get to the heater core.
@terrysibley9636Ай бұрын
@@royzcustomz you know on the older stuff,you cut a window in the box itself from the inside and then epoxy it back on, some flat black paint and you'd never know. Lol. Oh the good old days, Right
@royzcustomzАй бұрын
@@terrysibley9636 well I guess there are a few people that have said they've done that with there torrent. This was a customer's car and I didn't want to hack up someone else's car. I'd rather do it right for a customer if ya know what I mean.
@terrysibley9636Ай бұрын
@@royzcustomz absolutely, integrity,it's a rare but welcome thing. You did good. Keep it up.
@lancemoon3444Ай бұрын
I do have a question, I have a 1988 cab in good condition but my cab corners are shot..the inner support of th cab corners are rotten how do I fix that...can i DM you ?
@royzcustomzАй бұрын
You'll have ro cut out the rotten part out and make a custom piece to replace the rotted piece with.
@josephsmith3195Ай бұрын
Mine broke off in manifold 😢
@donsmith9081Ай бұрын
For the thin material, use .025 ER70S-6 wire with 75/25 gas. Also get some ventilation going.
@royzcustomzАй бұрын
It's flux core man it works just fine for what I'm doing.
@sraw93Ай бұрын
7:13 nut driver my friend incase anybody that may not be mechanical or hands on may need so they arent looked at funny when they get on the tool trucks or go to buy some
@minkymott2 ай бұрын
Simple and informative. Thanks for not making a long drawn out video. I hate the instruction manuals. The print is so small. I couldn't figure out how to change the wheel. Thanks for the video. Oh, I just bought this grinder today and the "wrench" they supply now is that same bar, only with a hole to go over the flange, instead of a wrench. Has the two pins though.
@darkscorp44152 ай бұрын
Good job!
@royzcustomz2 ай бұрын
Still have alot of clean up to do bit at least they are solid again lol
@rjjr70642 ай бұрын
Did... did you just seal dirt and rust to your frame? Oh boy...
@royzcustomz2 ай бұрын
Probably, but that wasn't what I was going for I was just doing the inner fenders for some sound deadening.
@kaidentroka91122 ай бұрын
Bro this video is fucking stupid tf u can read this shit on the box
@GabrielGavlan2 ай бұрын
How she doing boss? how hard would you say this job is total I should have all the tools
@royzcustomz2 ай бұрын
It's not too bad. Just gotta make sure you get the surfaces clean and get the timing right.also make sure you have the torque specs
@royzcustomz2 ай бұрын
As far as it running it's doing good so far.
@SKUBA2153 ай бұрын
60$ now
@lukelapacka62253 ай бұрын
I know I’m 7 years late but could you drop a link for the kit you got and let me know how it’s been working for it
@connoratkinson29273 ай бұрын
Gonna toss one on my 07 Outback with a red delete
@STOPdzbanSTOP3 ай бұрын
Miałeś tam jakieś inne tłumiki katalizatory czy tylko końcowy i nic wiecej?
@bezares7113 ай бұрын
Very good video sir Royz ! Thanks for sharing...
@royzcustomz3 ай бұрын
@@bezares711 thank you. You are welcome.
@trab59333 ай бұрын
Wrong title INTAKE GASKET NOT HEAD GASKETS
@royzcustomz3 ай бұрын
I changed the head gasket too
@k-drizzy79143 ай бұрын
One question you think this would fit on a 2011 ford fusion se 2.5 4 cylinder?
@royzcustomz3 ай бұрын
I don't see why not. See what size pipe your car has and get the adapter for it. These mufflers come with 2in. And 2 1/2in. Inlet and outlets
@k-drizzy79143 ай бұрын
@@royzcustomz I’m getting it man. Sounds awesome
@k-drizzy79143 ай бұрын
@@royzcustomz I like that it still haves that aggressive sound to it.
@stephaniebaggett80453 ай бұрын
So hub is missing. Discovered when I’m trying to free stuck wheel. What now
@royzcustomz3 ай бұрын
I'd say try and see if you can get a nee hub from Amazon or an autopart store
@bravoconnexions75283 ай бұрын
Hi, thanks Am from South Africa, where can i get oil pump for CADILLAC BLS 2.0T
@royzcustomz3 ай бұрын
I'd say try amazon man
@efrenmora59753 ай бұрын
Oil and coolant got mixed cuz water pump failed on my equinox do you recomend to changing it?
@royzcustomz3 ай бұрын
I don't think it would hurt to change it. It's kind of how you feel about. I'd be pretty sure the pump is fine.
@bodeer49174 ай бұрын
Great video. Thank you!
@royzcustomz3 ай бұрын
You're welcome
@georgelouis65154 ай бұрын
I got one. I just want to know how much dust does it kick before I use it.
@royzcustomz4 ай бұрын
Probably should use a mask
@georgelouis65154 ай бұрын
@@royzcustomz can you do it in a drive way if you use the hose attachment?
@royzcustomz4 ай бұрын
@@georgelouis6515 sure
@DaleHutchens4 ай бұрын
How did you get the pilot bearing out?
@royzcustomz4 ай бұрын
I used a slide hammer with a bearing puller attachment.
@biatrizmequemeque41844 ай бұрын
And I wanted to know how many types of vehicle brands the launch cr529 accepts?
@royzcustomz4 ай бұрын
Idk there is no list on the web site or in the box. To be honest I was kind of disappointed in that.
@biatrizmequemeque41844 ай бұрын
@@royzcustomz OK! I really wanted to know why I have a machine that just isn't opening the diagnostics on the vehicle and it says communication failure with the ECU. Why am I welcomed?
@royzcustomz4 ай бұрын
@@biatrizmequemeque4184 have you updated it on the web site?
@biatrizmequemeque41844 ай бұрын
greetings illustrious! I have a machine like this but it is not communicating with the vehicle. What can it be?
@kevincollins41124 ай бұрын
Can it be changed to sae or standard readings instead of the metric readings yours is showing? Is in your temps were showing in °C I would want °F. Your intake air temps showed 40°C which actually would be 104°f.
@royzcustomz4 ай бұрын
Idk. I didn't get that deep into it
@kevincollins41124 ай бұрын
Fuel system status "CL" means Closed as in closed loop, not clear. It will change to "OL" or closed loop once vehicle has been cranked and off of high/cold start idle.
@AlmondNut4 ай бұрын
Man, you literally have EVERYTHING i need/want to do to my ZX2 😂😅 Are you psychic? 🧐
@royzcustomz4 ай бұрын
Lol! I'm doing good to do my own.
@AlmondNut4 ай бұрын
Thank you for unknowingly helping me swap the transmission in my 1999 ZX2 S/R 😂 Every video was exactly what I needed to know, and it's great to have someone formal and not all professional 😁 I have most of the same set-up on my car as yours, so if you're ever wanting to collab with a fellow ZX2 owner feel free to reach out! 🤝🫡
@royzcustomz4 ай бұрын
Glad to be helpful
@ianmoberg3744 ай бұрын
I just got those same headl8ghts lol that's a lot of purple in that engine bay, did u happen to turbo ur 2.0 while u were in there?
@royzcustomz4 ай бұрын
No, I would have liked too but I ended up selling the car cause financial issues
@Outback694 ай бұрын
Sounds bad ass. I wonder what it would sound like with a pair of UEL headers on my outback. I'm installing one on my new to me Subaru Outback 2.5L H4. It has a five speed manual in it. So should sound pretty good. Wanna hear that Subaru RUMBLE. Not rasp or pops or bangs RUMBLE!!!
@Outback694 ай бұрын
What size tip did you buy for your car? Thanks- Weylan.
@royzcustomz4 ай бұрын
I'd say try ot with the resonater first and see how you like it. I just used a little 3 inch tip I believe
@Outback694 ай бұрын
Ok thank you, I'll try it. Getting ready to spread Prius repellent during election season... @@royzcustomz
@k-drizzy79143 ай бұрын
@@royzcustomzdoes it get louder overtime? I have a cat and resonator delete and muffler delete but you gave me a idea on getting this muffler
@royzcustomz3 ай бұрын
@@k-drizzy7914 no it doesn't get louder.
@olojoker10484 ай бұрын
Anyways…
@andrewlace4 ай бұрын
Hey Roy, thankyou 👍
@royzcustomz4 ай бұрын
Welcome
@machine81hood994 ай бұрын
Thats just awful
@KieranMaher-ui3ct4 ай бұрын
What’s the torque specs on the bolts I used an inch Milwaukee but not sure if there tight enough ?? Thanks from Gibraltar
@royzcustomz4 ай бұрын
75-85 ft. Lbs.
@BILL-sb5kk4 ай бұрын
How is that harbor freight welder working out for you ? flux core wire is the way to go when welding out side right ?
@royzcustomz4 ай бұрын
I love the little welder. You don't have to worry about gas out that's for sure.
@jorgelabrador41044 ай бұрын
Why, is it fake?
@donrandle89994 ай бұрын
I read the last three comments, and they are all wrong. The mechanic didn’t break them on purpose, and the ratchet wasn’t crooked. Whoever installed them used a power gun. I’ve done it before by using the power gun, you create hairline fractures in the porcelain. Then the heat makes them expand and separate.
@shaneschlievert54924 ай бұрын
Whoever put in or took out wasn't keeping the ratchet straight with the plug. Causes socket to push against metal nub and breaks the porcelain