I would suggest making it easier and buying a different pedal board with more clearance. There is nothing especially unique about Pedaltrain. They're are plenty of other vendors who produce pedalboards with more clearance to mount power supplies underneath. I will say Pedaltrain boards ship with very nice cases - and I think that's what you are really paying for but I never liked the nano series do to their flatness.
@kevindaniels67621 күн бұрын
How did you mount the iPad ? That is what I want to do !!!!
@theoteddington925624 күн бұрын
is there an option to power the DC4 via one 9v output out of the DC7? I need to use the 24V for my poweramp pedal.
@Ben5991026 күн бұрын
Can I have that 330?
@odessachen2 ай бұрын
27 outlets should be enough 😆. thank you, very helpful:)
@eightcoins44012 ай бұрын
Whats the point of powering a Volca Mix with a Pedalboard PSU? It literally comes with a regular PSU.
@guitarplayer19942 ай бұрын
Does anyone else here the high shrieking noice?
@g.m.16722 ай бұрын
Hello Cioks team, I have a few questions and would appreciate your guidance: It’s almost impossible to find a 24V40 adapter. Do you have any suggestions for a replacement? Should we consider using a laptop adapter instead? You’ve mentioned Cioks 4 Versions 1.0 and 1.1. (I have 1.2 BTW) What are the differences between these units? Which power supply would you recommend for these units? Is it acceptable to use a power supply with 5V/3A for both versions? There are many power bank options available, and people would prefer not to buy an expensive one unless there is a real benefit. There are some DC 2.1 to USB-C adapters on the market. Would we get better results with a power bank if we use these adapters? If so, which cable would you recommend? You make the best power supplies on the market, and I respect that. However, many people like me have limited knowledge of volts, watts, and currents. A simple guide would be helpful so that we can spend our limited funds on the correct units. Thank you very much, and I understand this video is four years old, so I'm not sure if I'll get a reply-but any response would be greatly appreciated! Best regards,
@Dalegribble033 ай бұрын
How do I power a Line 6 stomp like a DL4 that requires 1200mA at 9volts??
@pablo29713 ай бұрын
Does anyone know if the One Spot CS6 fits a templeboard in terms of screws? I want to do this same thing but with CS6.
@user-sn3cs2hd8r3 ай бұрын
But no one talks about the power cable? Mickey Mouse does not plug into the USA IEC ? What is the deal? Do I need an adaptor for that or do I have the wrong Ac Module….
@PeterSoos-e7w3 ай бұрын
Dobrý den. Můžete mi prosím poradit? Uvažují že si koupím Cioks Ciokolate. Chci se zeptat zdali je schopen napájet kytarový efekt Digitech Whammy DT. Ptám se z toho důvodu, protože napájecí zdroj pro Digitech Whammy je 9 V / 1300 mA. S pozdravem Peter Soos
@tyelynguyen6944 ай бұрын
Can DCCioks 10 use Strymon Iridium pedal 500mA? Please Sir
@dmitrymashkov93795 ай бұрын
03:51 - "if you want to move or remove this pedal from the board, you'll have to of course remove the power supply first". I bet that's the trickiest part, because you can't unscrew the power supply without detaching the pedal first. And you can't unscrew the pedal, because it's covered with the power supply underneath the board. So the only way left is to detach the pedal from the sticky pad completely. I would like to see people doing it on a real board - it must be suffering of some sort
@KittyKatATK4 ай бұрын
I'm sitting here right now with the hex stand offs and a dc7/dc8, and still can't figure out a good way to mount them on my templeboard
@dmitrymashkov93794 ай бұрын
@@KittyKatATK I did that just yesterday. I had an existing working board where I wanted to replace the power supply. The tricky part was to find the right spot for dc7 - it can’t go under large pads. With medium pads it sort of matches, but I was able to screw down only two stand-offs out of 3. And of course I needed to detach one of the pedals from a medium pad and use my spare one to mount the supply first and re-attach that pedal again. If you’re building your board from scratch, then you may want to be really careful with layouting. I was shocked that cabling changed the desired layout drastically. With a power supply it’s just one more thing to keep in mind. Good luck
@samcarroll_yt5 ай бұрын
Will the Cioks SOL power the Stomp with the correct 2.5 yellow cable?
@tested2115 ай бұрын
Thanks for making this. I recently bought a DC7 and was thinking about an Effectrode Delta Trem, so this is perfect. (the DC7 is great btw, very pleased with it)
@send2sidz5 ай бұрын
Noob question - Does pushing the DSP on these units push the power drawn?
@kameel685 ай бұрын
I used the USB connection for a LEDstrip. Looks cool, but doesn't have a real purpose.
@jonathonevans99736 ай бұрын
How do you remove the power supply without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply?
@Jaajiapik7 ай бұрын
Do we know If I can chain the Eventide/cioks Powermax to 2 Cioks Hi5 Templeboard Modules?
@particle-dots7 ай бұрын
can you use this power supply with a desktop synth (or multiple synths) eg behringer K2, neutron etc...?
@tusharkakshapati76107 ай бұрын
Can i use a 25w or 45w usb c power supply and use the full 4x 660A ?
@taewankim62837 ай бұрын
Can I power my Behringer synthesizers?
@Emil-Antonowsky4 ай бұрын
I'm hoping so......
@Emil-Antonowsky4 ай бұрын
I'm hoping so....
@alanchicas7 ай бұрын
send the links for the cables of hx stomps please where can i buy it in usa
@Whamystrang8 ай бұрын
Best ever power supplies.
@johanfernandoriveraburgos61858 ай бұрын
Crazy thought but, could you use 3 gray parallel flex? The first 2 plugged in 4 of the DC7 slots and the 3rd one to connect those 2 so that you could have 2.6 of current head room? Is that a safe connection? Assuming that its all in 9v
@lukemclaren87168 ай бұрын
So i just bought this as it said it's a power supply. Not realising its a expansion. Can this unit be used alone as a power supply
@jturquoise8 ай бұрын
Very friendly with the competition 1 spot 😊
@ZackGnh8 ай бұрын
The fact that I can go to any country and just plug in and play and not forget to flip any switches is amazing.
@Bairov9 ай бұрын
I thougt using that cable would give you 24v. As the two 12v ports would double to 24v?
@TechnoNates9 ай бұрын
what about ARmk2 / Octratrack/ A4 mk2?
@christopherjrager10 ай бұрын
Hi, I have your DC10 power supply unit. I would like to know if it is possible to use the DC10 to power both a Digitakt and a Digitone at the same time. It seems that input #10 on the DC10 is the only input that could be set for 12 volts with high enough milliamps, but I don't know if I totally understand how it works. Let me know what you think?
@lowercase363510 ай бұрын
I would kill for those multimeter leads.
@sargentppeper10 ай бұрын
Excellent!! 👍🏼🎸😊
@PhillipMoita10 ай бұрын
Hello CIOKS team! I have the DC7 and I need a power supply for my Reverb pedal (Van amps sole mate - requirements: 12VAC, Current draw: 125ma peak). Can I use the CIOKS DC4 Expander in conjunction with the CIOKS DC7 to power this pedal? You can always make other recommendations, I appreciate it.. Best regards and thank you for your excellent products!
@TomyVerok11 ай бұрын
You guys forgot a rly crucial point! If u want to put the pedal in before u put the power supply, the only way to remove your pedal to remove the powers supply again is to detach it from the patch u glued in...
@sirlost949 ай бұрын
Just remove the power supply first?
@jonathonevans99736 ай бұрын
@sirlost94 How do you remove the power supply without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply that you can’t remove without removing the pedal that you can’t remove without removing the power supply.
@sirlost946 ай бұрын
@@jonathonevans9973 lol usually you’d have put the PS last so that should be the first one to be removed. I added a bracket to the pedalboard and it’s super easy, 4 screws and it’s out
@donbuttaccio446411 ай бұрын
I am not finding where to purchase the 24V power adapter 'Adapter Kit" that is mentioned in the video at time stamp 2:28.
@tusharkakshapati761010 ай бұрын
Leaving a comment here for the same reason.
@Sperzel7 ай бұрын
Discontinued I believe.
@kameel6811 ай бұрын
Great power supply. The adapter kit is not available anymore. The Boss PSA 230s(9V/500mA) does not work with it, but my GoSolid! adapter(9.1V/1000mA) does.
@kameel6811 ай бұрын
I put the Cioks 4 on a Pedaltrain Nano. The 24V adapter was not included. Where can I get that adapter with the bracket?
@316tommy Жыл бұрын
Could you guys do this test for a line 6 pod go wireless?
@sunnyschramm9650 Жыл бұрын
wow - thats supercool!
@sunnyschramm9650 Жыл бұрын
Love my DC7 and the expansion possibilities 🥰 Would love to see a Clip-Mount for Palmer Pedalbay-Boards 🍀🙏
@EddieB2047 Жыл бұрын
One of the best power supplies
@adamkramer3213 Жыл бұрын
Best power supply available.
@okiksinatra7012 Жыл бұрын
Apa kelebihan dari cioks schizophrenic?
@tszleung Жыл бұрын
🤣🤣 I'm the red one user... And I just changed to CIOKS; watched this video before.
@armandomartinez1149 Жыл бұрын
When you plug in the power for the HX, are the two channels on 9v?
@darkestmind218 Жыл бұрын
it would be a great feature to add a 230V power through ouput to be able to link one of the many pedalboard amps to it as well. then it would be a complete package deal! please correct me if such a thing exists already
@luxmundiofficial Жыл бұрын
Tak for det! Good to know :)
@sumithramachandranwatchyou5045 Жыл бұрын
Can DC7 power up HX stomp and Boss GT1000 Core together?