Currently building a foxtrot mike 16 inch upper in 45acp using the slim profile Aero. Already have a 4 inch upper built. They will share my fm lower and bcg.
@D5quared91Күн бұрын
This is a KABAR knife. This was used by MARINES not navy.
@Steelcurtain75Күн бұрын
After a lot of research and agonizing over which one, I just ordered the Compact model 91190. I hope the right one is shipped. Great video. I subscribed.
@erik22laxКүн бұрын
can't go wrong with either model
@robertolallave15412 күн бұрын
CZ WHERE IS THAT SWEET TOOL WITH A 10MM CAL. ??
@erik22lax2 күн бұрын
they only make 9mm in most of their models and a few in .40 S&W.
@BillTrevino_Texan3 күн бұрын
Your impressions are right on! Great feel in the hand, controllable, 15+1, etc. I own the CZ 75D PCR, P-07, & P-10. I shoot better with each one. Enjoy!
@boertjiereviews34733 күн бұрын
Don't look so excited dude😂
@keithcallaway14443 күн бұрын
How or where did you paid under $1000? Is that price still available? Thank you
@erik22lax2 күн бұрын
i got in online-i don't remember where but i did a price check by looking up by the model # and currently is $1100 or below.
@BobbyBurns-o8o3 күн бұрын
This is good quality... it's not made by Machine Hand Forged
@kalubkoetje55804 күн бұрын
Are the slide assembly's interchangeable?
@kelyball4 күн бұрын
So beautiful
@kaystephens26724 күн бұрын
What a beautiful pussom.
@gjna51435 күн бұрын
Urban grey is not discontinued... Where did you get that from?
@erik22lax4 күн бұрын
the CZ website cz-usa.com/product/cz-shadow-2-urban-grey/
@tanhy15227 күн бұрын
How about kimber?
@erik22lax4 күн бұрын
don't have any experience w/Kimber at all. I would think similar to Springfield Armory. They sell both those brands at Bass Pro/Cabelas.
@caribbean76677 күн бұрын
Finally someone that knows how to lower the hammer on a CZ 75 type of pistol: there's the half notch, use it! Use it also to field strip the pistol as the instructions manual states because with the hammer in the half cock position you can easily align the signs between the frame and the slide to put out the hold open. A little advice: to lower the hammer on the half cock position in total safety, you can hold the hammer with your weak hand fingers, putting the index finger between the hammer and back of the slide. That's the way I lower the hammer on a CZ 75 type of pistols: I hold the hammer with my middle finger on the left, the thumb on the right and the index deep in front of the hammer. I pull the trigger, release the hammer, release the trigger and slowly put the hammer on the half cock position.
@paulcoffey17848 күн бұрын
75B compact! Perfect!!
@turbodreamscometrue28188 күн бұрын
This is the video i have been needing. Thank you Sir.
@erik22lax4 күн бұрын
Glad it was helpful!
@turbodreamscometrue28184 күн бұрын
@@erik22lax I really like the S and the way it looks. Finally went ahead and bought the R for $150 less. Hard to argue with $150 that was enough o pay for the charging handle and a NiBO bolt group.
@shannonpatrick779 күн бұрын
Heck yeah you didn't get the omega version I didn't either. I want the old style it took more work and machining, and I think it feels a lot better once broken in.
@erik22lax9 күн бұрын
i have the omega version also lol
@shannonpatrick779 күн бұрын
@@erik22lax What do you think of the triggers
@erik22lax8 күн бұрын
@shannonpatrick77 out of the box the omega is lighter but the curve on it i could do without
@shannonpatrick779 күн бұрын
The Berreta is a nice gun I have one, but it aint nothing compared to my CZ75BD
@erik22lax8 күн бұрын
I bought a Beretta 92xi & was disappointed
@joelgonzales8059 күн бұрын
I’m picking up the CZ 75 SP01 10/14/24 🎉
@erik22lax4 күн бұрын
TODAY IS THE DAY
@luispadilla30293 күн бұрын
Congrats
@luispadilla30293 күн бұрын
I just bought a 75 p01
@Mr5150guy10 күн бұрын
There is an arrow on top of the pusher showing muzzle direction. If you use it as directed, it allows more room for the top slide support to do its job by stabilizing the slide better toward the front of the slide. I can't tell from your video, but it doesn't seem like the upper slide support would be contacting much of the slide the way that you're using it. Some painters tape on the sides of the sights prevents marring also. My CZ 75BD had the sights installed at the factory from left to right which was obvious from the markings on the sight. I removed them right to left and installed the new sights left to right. Though I didn't measure the dovetail, it did not appear to have a taper, as both new and old sights would enter in the dovetail the same distance from either side with finger pressure. About 1/3 of the way in. I'm not trying to give you a hard time, just sharing my experience so that it might be helpful to others looking to try it out, because It can obviously works either way. Thanks for the video, I appreciate your time and effort.
@shrtbus4411 күн бұрын
After carrying a 365 and a hellcat i now carry the emp. I have no issues with printing and it's more comfortable to shoot. Weight isn't an issue either because having a dot and a light on my other ccw guns the weight is almost even
@erik22lax4 күн бұрын
i have a CZ P-01 now DA/SA w/Decocker
@Peetabread55512 күн бұрын
Can you adjust the gas blocks?
@erik22lax12 күн бұрын
@Peetabread555 these aren't adjustable gas blocks.
@Slamspiffy_III12 күн бұрын
Beautiful gun sir! Mine is my favorite pistol to shoot. I think the omega trigger and hammer are a good improvement to the original design 👌
@brianc001915 күн бұрын
Yep 👍🏾
@Dr.Hawk-Jr16 күн бұрын
Thank you for the video! Got mine today. Do you know if any of sls or als models would work with shadow 2?
@erik22lax14 күн бұрын
@Dr.Hawk-Jr if you look on the safariland website you can search by model of firearm & it will show what they offer for that model
@Dr.Hawk-Jr12 күн бұрын
@@erik22laxunfortunately it isn’t showing any useful info, even this particular model doesn’t show. For SLS models they say it fits CZ 75, I wanted to ask you since you have both 75 and shadow 2, are they close enough to fit in the same one?
@starlinsims296916 күн бұрын
Next on the list.
@bkhix20817 күн бұрын
VERY NICE!! Cool now mill it for a dot & CGW Pro package, get a good light & holster. Do it now your gonna do it eventually anyways. Ask me how I know.
@edw151518 күн бұрын
Like your review and your excitement. Because of your thoughts im Going to turn my 75b omega into my next race gun. Crazy like you say, after 1000 rounds or a bit more the SA trigger is right at 2.6 pounds the DA is shit but it's going to get better. Without sending it off the CGW ultra lite kit got the DA down to 5.7 pounds. From what you have said and feeling the difference just from the spring kit it's going to CGW. Thank you
@kanitimothy676419 күн бұрын
The best gun money can buy
@lukelobue668319 күн бұрын
this didn’t show the gun doing anything thanks for useless information
@erik22lax19 күн бұрын
@@lukelobue6683 you're welcome
@1jodlar20 күн бұрын
P01🤘
@fakie932920 күн бұрын
I followed your upgrade path and it 100% has a noticeable difference in SA and DA pulls. I recommend getting an extended firing pin though, I did notice some light strikes because of the HS. I recommend polishing the trigger bar and hammer strut to reduce friction, and maybe the plunger block. I think my next upgrade will be the trigger and hammer. then I'll look into a FBJ delete.
@erik22lax20 күн бұрын
i have the extended firing pin in my 75B and 75 compact but not in my SP01 or P01 & no light primer strikes for me.
@fakie932919 күн бұрын
@@erik22lax might just be my ammo. I just pick up whatever I can get off ammoseeks lol. I figure if anyone's in my position the extra $25 is worth it for peace of mind
@edwardflint62220 күн бұрын
Recently got the 10mm and took it out to the range today and shot 100 rds. Tack driver when i do my part, no issues at all.
@1jodlar21 күн бұрын
Why not the P01 Omega?
@erik22lax21 күн бұрын
@1jodlar they discontinued that model. Also, the regular 75 series is more customizable.
@1jodlar21 күн бұрын
@@erik22lax that makes sense. In my country in one shop it says that is still available. I need to contact them.😉
@erik22lax20 күн бұрын
@1jodlar the omega series is still available in the US but only for the polymer framed P07, P09, and P09 nocturne the new model
@emanuelsenyolo896921 күн бұрын
My New Liking🥹💥
@patpaa200521 күн бұрын
Are the slides interchangeable?
@erik22lax16 күн бұрын
Should be. They're the same thing just with different internal parts
@Erad3r21 күн бұрын
Hello there i was between canik sfx rival sao gray and cz shadow 2 urban gray. CZ looks it's like a better gun canik is nice but look like a toy compare to CZ shadow 2.
@erik22lax21 күн бұрын
@Erad3r i don't have any experience with Canik but shadow 2 is hard to beat for the price
@chrisl503822 күн бұрын
Got my ronin emp 3in 3 yrs ago with no issues and stacks rounds down range. But I won't hide that I have worked it over
@howardkahn433023 күн бұрын
COMES WITH 1 MAGAZINE THESE DAYS...
@MittenManShoots23 күн бұрын
lol it’s not just you smh 🤦♂️ it’s a beautiful looking gun but the magazine has to be forced in and then like you said feeding issues causes jams obviously
@erik22lax22 күн бұрын
everyone has the same issues with the magazines & SA keeps saying it's the ammo
@jmac246523 күн бұрын
I just bought my 2nd one. First one ran like a top and traded it in for another 1911. Bought another last week and it wouldn’t even chamber a round. I used 8 different kinds of ammo, mostly HP’s. I would have to take 3-5 rounds out of the magazine everytime before it would chamber a round. I have 3 magazines from SA and tested them all and it did the same thing with each one. I disassembled it and on the lugs on the slide I found 2 fractures in the metal. I just sent it back to SA for warranty work. I didn’t even fire a round out of it yet. Hopefully it works when I get it back. Mine was the 4”.
@erik22lax22 күн бұрын
Sounds like a lemon 🍋 they must be ok with doing warranty work
@TravisJohnson-j6s23 күн бұрын
I got the P01 steel with the Manuel safety. You can still decock it with your hand and it makes for a smoother trigger pull
@BillyJackDrexel25 күн бұрын
How do you find the fit of these? I’m looking at getting these exact jeans but I’m hesitant on the sizing. My Levi’s 505 regular fit are 31x32 and they are perfect. What does the waist measure on your pants exactly?
@erik22lax25 күн бұрын
They are relaxed fit and are comfortable. Not tight on my thighs and the length is just right. Didn't measure, but they are a 32x30 and sizing seems accurate
@MrBuddha90026 күн бұрын
Where is the side sticker lol 😂
@jarinar-paisri45927 күн бұрын
ชอบมากตัวนี้ตัวเดี่ยวกับของผม
@Mr.Glockinstien27 күн бұрын
With Gaston’s passing this is an official piece of history now even if it dosent say G17 on the side still made like the good ol’ Tupperware back in the day
@erik22lax24 күн бұрын
I have one brand new untouched in the box 📦 this one I have used