বাংলাদেশের কোন জায়গায় এই টুলস আছে কি ঢাকা বা নবাবপুরে

She can bust my nuts anytime.

Hiç bir boka yaramıyor

Contact number please

Would have been nice if they used the nut buddy on the same nut for the demonstration.

I could have used this when I had a Chrysler with those awful acorn two piece lug nuts. They were on so tight nothing we could think of would get them off. To make things even worse as if that was ever possible they had thin metal caps over the actual nut. As these abominations age they become harder to remove when that cap slips or deforms. If you have some place you have to be very soon hopefully you have a second vehicle or someone who can give you a ride. That is because removing these maddening things may very well take all day. You will need drills and cold chisels. You may even need new wheel studs or a new hub by the time your nightmare caused by these things is over! I used to think that Chrysler was the only one who used these horrible things but it turns out even Ford does on some vehicles. For just a dollar each I had them all replaced with solid ones that also have a nice chrome finish. I never had another problem again! When you get a vehicle look and see if you have those cursed 2 piece lug nuts and switch them out before you get stranded on the side of a road and need to get it towed because you can't get the wheel off 😠 These things usually happen at the worst time and when you least expect them. It may be on one of those awful days when you have a zillion things to do and can not stop anywhere or have a moment of rest because you have such a tight schedule. I am glad not to have to put up with that kind of stress!

can we tight the nut using this?

I need one of those for my drill

אדוני, אני מאוד שמח עם הסרטון הזה ואני מאוד נעזר בעבודתי על ידי הסרטון הזה ואני מאוד אסיר תודה

Yeah I call this tinder chick my nut buddy.. my nuts have been half way down her esophagus

best I have ever used as well; expensive, but soooooo worth it...

wish i had a nut buddy

Taking off a lug that requires a 1” impact that puts out more than 1,500 lbs of nut busting torque with a 1/2” impact on a 3/8” hose, and to make matters worse you use and extension to make the impact even weaker. I get that it’s probably a great tool have, but there could’ve been many other realistic scenarios this could’ve been used in.

This tool is amazing! I used it on a roadside call today on three lug nuts my 1" impact couldn't budge.

Copiando a wera

என்ன விலை எங்க கிடைக்கும்

I do use RX5 and RX10 be very good.

He put the turn stop arm on ghe wrong side,that tells us the nut wasnt tight at all!

Name of tools

kzbin.info/door/-Ru4ZAHlA60bYe0OMYNMyg

Bobby, questions... The High Heat Resistant Black, does that stand up---without any failure---to Brake Cleaner? And I don't see any indication on the can as to whatt he finish is. Semi-gloss? Satin? Flat? Thanks.

Pop

can you use an impact with this tool

Are yours greased up?

I think when you are changing the blade to use the second half you can press the red button remove the blade flip it over and slide it back in to the top with the red button still pressed for a slightly quicker change. Then when the second half is used remove discard and slide a new one form the chamber as shown here. Thanks.

Cuanto costaria solo uno 27326

I have a Fiskars' utility knife that is identical in function (other than orange button instead of red). This video nicely explained the blade replacement (and re-use of the other end). Thanks!

This video is such a trip, it’s like. 1950’s commercial but with color and better audio.

Won't work for me....I'm a stud. 😁

Weird that this showed up eight years later in my recommendations during “no nut November”.

I used to have a nut Buddy 🤪

How much

Your kidding right, using a 1/2" impact to remove a nut on the semi than put your tool up against? Idiot. the buddy is 1" drive so why aren't you a 1" impact for the demo? because your tool sucks

Now people are going to start tightening their lug nuts with this thing!

If the 12 o’clock nut is stuck use this on the 1 o’clock nut cool

Sweet

NuttBuddy😩😩

Looks pretty cool

Could've called it "The Bust A Nut"... missed a golden opportunity there.

Or you could just get a heavy duty impact.

My ex girlfriend got a tool named after her....

What's the input torque max?

This comment section is a gold mine 😆😂🤣

But you didn't undo the nut that was over torqued! 🙄

What the name this tool

What a name...lol sounds like the title of a 80s porno flick.

All he needed was an impact gun, he wasn't using one.

I told her my nuts are frozen and need a nut buddy.....she slapped me

Oh hell.I thought you were givin away free nutty buddies.

“Nut buddy” has to be the worst tool name I have ever heard