CNC Design Limited

Пікірлер

@paul.alarner6410 Ай бұрын

so the link is another poxy advert no bom or code etc,you a$$holes should get banned from here!

@BETTERTOMARROW 5 ай бұрын

What ever happened to the mag motor design?

@BioStuff415 5 ай бұрын

much nicer than my converted lathe... lol. Would like one so I can go cook lunch during the winding rather than sitting with the wire in my hand. Just ordered... now I have buy a PC - yuk. A Mac port would be grand.

@llluckyent.9133 7 ай бұрын

Where can i buy this

@andrewmazurkiewicz105 9 ай бұрын

Nice one Sean, It sounds nice and quiet. Hope all's going well. My Mark 1 is still giving sterling service a bit slower than this machine. Cheers Andrew.

@UkcncNet 9 ай бұрын

Hi Andrew and thanks! Glad your Mark1 is still going strong that end after all these years👍

@trickies Жыл бұрын

i have a spare 5 axis controller , one of yours for arduino mega. was contemplating making something similar, do you have an hex file download for firmare for this.

@ORDhardhead 2 жыл бұрын

for cut 9mm or 12mm plywood whit the same laser 100w co2 reci what is you best configuration?

@joseantoniomontieltellez1601 2 жыл бұрын

I need one or two

@absolute___zero 2 жыл бұрын

not useful for me because I am a Linux fan

@davidgreenseeker167 2 жыл бұрын

Audio explanation would be good and a sample of the code of the current coil to play with would be much appreciated.

@zhengtaifeng 2 жыл бұрын

Hi Sean, Good job. You are an expert in this field

@majidalarif9176 2 жыл бұрын

Wiring

@perspectivex 3 жыл бұрын

Did you have to change any components on the head part? Like a different air tube or nozzle or something? Also, how often does the compressor kick in to top up the tank (and how big is the tank)? Can you use it to do air assisted cutting of thin sheet metal?

@hmwatercomponentspvtltd2108 3 жыл бұрын

Can we use this sheets for water electrolysis or water purification?

@dwaynejohnson7499 3 жыл бұрын

Can this do cut outs on 1/2 inch mdf?

@stanislasnguimatsa2555 3 жыл бұрын

Hi mister very interesting your video please what is this electronic card and how to get me

@michaeljay9059 3 жыл бұрын

Some audio explanation would be good!

@funkfreeze 3 жыл бұрын

4 bar pressure was a good sweet spot for me on my 100w.

@shivdattgosvami2989 3 жыл бұрын

India price

@rajuthummar1259 3 жыл бұрын

sir Send pics

@wildert1 4 жыл бұрын

You should try to use a dissolvable base, like salt, and dissolve it

@rbsuraj8003 4 жыл бұрын

Superb

@eonclu3778 4 жыл бұрын

How can I purchase one of these awesome machines... Can anyone provide me a link??

@chrispotts2010 4 жыл бұрын

Thanks for this very informative video.

@SaleCNC 4 жыл бұрын

Is this stepping motor? I thought step motor run max at 600rpm and you have 50:1 gearbox, then it should be 600/50= 12rpm. Are you sure they are stepping motor?

@UkcncNet 4 жыл бұрын

Depends on your controller, Here is a video of our PTHAT getting a Nema 17 Stepper motor up to 3000 RPM. kzbin.info/www/bejne/i3SZdKKAisukpcU

@expert8997 4 жыл бұрын

What bits are you using?

@UkcncNet 4 жыл бұрын

Please see link in description to the product page that gives details on cutters and feed rates for each video.

@andrewmazurkiewicz105 4 жыл бұрын

Hi Sean Nice animation and a good idea for people making large amounts of pickups. I think a double setup would be enough for most of the smaller producers Cheers Andrew

@UkcncNet 4 жыл бұрын

Hi Andrew We already have an option for double setup and a few Guitar Shops use it, the 200mm Coil Winder with Dual motors and Pickup plates. ukcnc.net/index.php?route=product/product&product_id=52 Cheers Sean

@josewilsonproanos1951 4 жыл бұрын

Donde se consiguen

@gyefawkes7868 4 жыл бұрын

would be nice to see the X movement stepper so that we can see the screw moving from left to right.

@ucupbintangtoedjoe4489 4 жыл бұрын

Sir order no ? Please

@ChuckTaylorSA 4 жыл бұрын

Hi what's your rpm?

@UkcncNet 4 жыл бұрын

Speed of spindle and feed rates can be found under the example on the following page www.ukcnc.net/index.php/products/cnc-500mm-x-500mm-routing-machine-kit/

@bisayangmedyocutetv9112 4 жыл бұрын

good maam/ sir im sherwin semitara from philippines you me help me to make this ventilator cause not my own for the patient of covid 19 to help them breath please help me please i do research on this or tips how to make it i can read book like your thesis please help me books for my reference

@fredison1991 4 жыл бұрын

wich program did you use for the animation?

@jalalhannan3243 4 жыл бұрын

God bless...We need more like you!

@kenmckay194 4 жыл бұрын

I have one of your pick up winders and I am subscribed. I see you made a lot of effort in designing this. I was a respiratory therapist in the United States for many years. Mechanical ventilators are very complicated. In fact this is very complicated. I don’t think I can do justice by commenting here. Please feel free to contact me if I can be of any help.

@UkcncNet 4 жыл бұрын

Thanks Ken for your kind offer, may well drop you a line. This is more of a Stop Gap device and not a replacement for a full on ventilator.

@selwynlloyd3219 4 жыл бұрын

Love what you're doing here best I can do is ask anyone I know to look at it.

@michab7477 4 жыл бұрын

I'm not a medic but I think force/pressure sensor may be needed, or some regulator to limit pressure.

@LV2XPLR 4 жыл бұрын

While it doesn't allow for control, a simple bubble tube could provide simple cheap protection from over pressure.

@latimer4964 4 жыл бұрын

I was working on something similar to this. A few things: 1. Given that you will want to use a longer tube system for longer duration events, you will probably want a larger system with dual air bags and viral filters, a.) so you can provide adequate air with redundancy (and ability to switch out worn bags), and b.) so you don't vent the infected exhalations into the room, potentially aerosolizing them. That makes things much, much worse for providers. 2. You'll probably want to include provisions for an EtCO2 monitoring solution (capnometer). This can either be a cheap CapnoDura Combi, or a more expensive electronic unit. Also, for the mask, sealing will be very important here, again, to both ensure the patient is getting plenty of air, while also making sure you don't vent infected breath into the atmosphere. As the capnometer will be in contact with the patient's infected air, ensuring a proper seal for that would probably be a good idea as well. If its a disposable colorimetric EtCO2 solution like the CapnoDura, then you will also want the ability to swap out capnometers safely. 3. They will probably also be interested in closed circuit suction solution (to remove matter from the airway). They may, or may not have this on hand. 4. A pulse oximeter is typically used as well. My concept basically took all these into account, with the added wrinkle that everything could be monitored remotely. The thinking here was that having one nurse capable of monitoring multiple patients, would reduce the need to go room to room to check on the systems. This keeps other nurses and doctors free to handle other patients, while also reducing repeated exposure to the environment. A simple 3d printed camera integrated bracket placed in front of each point of interest (capnometer, pump station, pulse oximeter) would be all that's needed, as it drastically cuts down development time, and is relatively low cost. If you can find a place receptive enough, the solution has merit. You are on the right track!

@UkcncNet 4 жыл бұрын

Thanks for taking the time to type all that information, well appreciated and good points.