Things I Do

Пікірлер

@steezy.cheez. 7 күн бұрын

Is it catless?

@thingsido2924 5 күн бұрын

@@steezy.cheez.no, it has a 200 cell cat.

@zachobrien6239 19 күн бұрын

Dont listen to this guy he says to wipe off as soon as it turns gray you do that and all your gonna be doing is waisting it ,if you read the can it self it says to polish metals untill black residue appears (hard rubbing is not necessary )work black residue in all directions adding small amounts of polish as needed ,it dose not say wipe it off as soon as it turns gray fukn du***ss thats why he used a already polished rim because he dont know what hes doing hes just making useless videos telling ppl how to do shlt wrong for veiws to make money off youtube he has no fukn idea what hes doing

@mehdidoha6813 Ай бұрын

My 15 inch wheel with 33s were 10-15 year old. Came with the vehicle when I recently purchased it. Just picked up the same exact wheel and tire setup like you from FB market place and ordered the adapters from rough country. Looking forward to how it looks. You are the real MVP. Thanks, man.

@jackmehoffer7819 Ай бұрын

I got mine for $39.99

@BurtBowers 2 ай бұрын

Was thinking to go one today they are now 80$ they dont have any coupons for it right now but have 90 days to return it if not happy with it which is good, i was trying to decide what brand us better the Avanti ir Wagner's brand heard & saw kot if negative reviews on Wagner spray guns so thought i would least try the Avanti one at harbor freight, i have 232 6' foot wood pickets to paint that are new not hanging up yet i would rather have them hung up but one side of the wood pickets will be up against chain link fence so have to paint both sides of the boards be lot of work yet but will be faster i tried rolling 30 boards & was disaster had to vlean up boards being the promer leaked between noards when had them laying flat next to each other rhe following day they was glued togher & wound up scrapping primer from sides of boards.

@thingsido2924 2 ай бұрын

@@BurtBowers I also have the Wagner Flexio 4300, both the Avanti and Wagner work well, but the main difference is the Wagner iSpray nozzle will spray undiluted paint. However, it can take time to get the settings (flow, pressure, & paint velocity) just right, otherwise it produces a lot of overspray or gloppy finish, whereas the Avanti is more user friendly but requires a lot of diluting if you use thick paint. The Wagner tip also dries quickly and I need to clean it every 10-15 minutes, otherwise the finish will be affected. I do like the Wagner gravity feed gun, but I probably wouldn't buy the Wagner Flexio 4300 for the iSpray canister gun again.

@BurtBowers 2 ай бұрын

yeah I looked into today the Wagner flexio 2500 model which you don't have to use any water to thin out paint or primer which is what I like, it's double the money of what the Avanti spray gun that harbor freight sells but just found out today that Lowe's only has a 2 day return policy on the Wagner spray guns which home depot has 90 day return so think I'm leaning more towards the Wagner flexio 2500 model that will serve its purpose it's like I said I don't want to deal with having to add water every time in the Avanti or lower end Wagner models .@@thingsido2924

@Denver1976Man 2 ай бұрын

put JL tires and rims on my 88 YJ. The front studs are just enough to get 10 threads. The rear wheel studs are too short. Replace them w3ith Dorman part # 610-234.1 and then the rears will be perfect. The 610-234.1 are for the rear 627 Knurl and 1 5/8. The 610-449 iw .627 Knurl and 1 15/16 on my 89 I had to trim them a little so they didn't stick out past the adapter. Also JLs are 14mm instead of 1/2 inch. You can still use the 1/2 inch nuts but they need to have a bigger cone than stock. Coyote 56K542 is a box of 20 bulge acorns for about 20 bucks.

@Dwight-ht7ek 3 ай бұрын

You have to have the water turned on. I've had one for years and it NEVER kinks as long as there is water pressure in it.

@thingsido2924 3 ай бұрын

@@Dwight-ht7ek I always turn the water on and then unwind it and it kinks everytime. I threw it away because it also formed a hole it in after just a few years.

@Dan-m2m 3 ай бұрын

The name 😂 though we all know he loves it get in there you topmechanic 😂

@markiskool 3 ай бұрын

Is it a vinyl or twill?

@thingsido2924 3 ай бұрын

Both tops were vinyl.

@haroldshine9455 4 ай бұрын

How you remove that 10mm bolt so easy? I got everything but that thing out. O ly thing holding me up rn

@veasnayong3456 4 ай бұрын

U puts clears coats on ?

@thingsido2924 4 ай бұрын

Yeah but it was a light matte finish.

@shawnkennedy9414 4 ай бұрын

Good luck getting that in the motor with the stretched out nylon (white band) it won't go in and if it does it will leak .

@thingsido2924 4 ай бұрын

I did this video 6 yrs ago, no issues installing them back in the car and no signs of leaks. The car now at 165k miles. Did the same to Audi a year ago, no issues.

@monkeyface_handsome 5 ай бұрын

I bought this brand today. A huge storm came through, and literally everything was gone. Found these guys and curious about the taste. Guess we'll find out in the morning 🫤

@ke6bnl 6 ай бұрын

I would be afraid that the bondo will break off when mounting the tire

@rmat9023 6 ай бұрын

yeah, no.

@Leadslinger619 6 ай бұрын

Nicer with the flat soft iron the gunmetal makes the jeep look like a Super Stock ass jeep.😂

@Shaanmojo 7 ай бұрын

I have my eye on the same rims and tires. Do I have to lift it? I don't want to lift the jeep. Will it still fit?

@thingsido2924 6 ай бұрын

Hi, thank you watching, I have a 3" lift on mine, I don't know if they'll fit without a lift. They might but you'll have little to no wheel travel.

@Shaanmojo 6 ай бұрын

Thank you!

@JeepTJ 8 ай бұрын

Straight to the point! 👏🏻👏🏻👏🏻

@tomasmedina7989 8 ай бұрын

I gave the vid a thumbs up.... didn't add to the ticker....sorry...

@queensapphire7717 8 ай бұрын

Have a Rugged Ridge sailcloth top, pretty good, snare drum tight.

@pikoanguiano9307 9 ай бұрын

Can someone post the link to the wheel adapters please🙏🙏

@thingsido2924 9 ай бұрын

www.roughcountry.com/product/configurable/wheel-spacers-1092c?gad_source=1&gclid=CjwKCAiA75itBhA6EiwAkho9e0fb8W5EfLMYNBHg1tt_k1YXZtouizWvBpPGD4fHuvdqo4IiqD9LCBoCqEIQAvD_BwE#211=621?|&||m||fit_first_1092RED-e

@StarSwarm. 9 ай бұрын

I’m a big fan of the flat soft iron but agree that the gunmetal was a better choice to match the jeep.

@cinnreds18 10 ай бұрын

Just a quick weird fact. I bought these a few years and blew 16 teeth off on my radial arm saw setup. I couldn’t help but notice there was a foam swastika in the bottom of the case. Anyone else see that?

@jaytpaul 10 ай бұрын

looks great. I have newer pintler wheels on my JL and I want to paint the silver (or tan), but nervous about F'n them up!

@Pincheemoska 10 ай бұрын

They both look good!!

@DennisMoore-f1v 10 ай бұрын

1st thing anyone needs is how to loosen the tensioner. Also where exactly it is. Waste of time watching this. Remove and correct this!!!

@thingsido2924 10 ай бұрын

The very part of the video says to use a 3/8" ratchet to loosen the tension and remove the belt. Do you not know how to loosen a tensioner or where the alternator is located?

@freddysosa5219 11 ай бұрын

Very helpful thank you for the video

@Andrew-dg7qm 11 ай бұрын

Some thing that wasn’t in the video, I believe the spare tire brake light will need to be raised. This can be done with washers. No need to buy the extension light

@Andrew-dg7qm 11 ай бұрын

Excellent vid. Thank you, very helpful. Has anyone used the stick on rubber flares with the stock fender flares?

@foreverftl Жыл бұрын

showing you taking it off wouldve been very helpful you know

@thingsido2924 Жыл бұрын

Yeah, but I didn't think to record until after I had it off.

@nicksolana6816 Жыл бұрын

Have you had any issues on thicker patches of Bermuda grass? Trying to decide between this one and the 212cc

@thingsido2924 Жыл бұрын

No issues, most of my yard is Tifway 419 grass and this cuts through with no issues.

@idahoseasonalcare1943 Жыл бұрын

Nice!

@tonyvelasquez50 Жыл бұрын

why did you buy a spray gun when you used the spray can in the first place ?

@thingsido2924 Жыл бұрын

I didn't buy the spray gun specifically for this job, I bought it for another job. I used it for the flares to spray automotive grade paint on the flares. The spray can was just adhesion promoter.

@Sinjin.S Жыл бұрын

Why not just pick aftermarket wheels. Spacers, no thanks 🤔😎

@thingsido2924 Жыл бұрын

Hi there, I had after market wheels and tires, 33x12.5R15 tires with 15x10 wheels but they road crappy. I chose these because of the price, 5 new tires with wheels for only $1,000. These only had 70 miles on them, the spare was never used. Just curious what is your personal experience with wheel spacers? Not what you've read or heard about them, but your own personal experience?

@mannya5657 Жыл бұрын

Great video, would you happen to have the link I would like to update my 1997 TJ also and put on JL wheels. Thanks

@ryft9842 Жыл бұрын

Hey how do u get the end price off

@thingsido2924 Жыл бұрын

Hi, I'm not sure what end piece you're referring too, I didn't take any end piece off.

@ryft9842 Жыл бұрын

@@thingsido2924 it looks like it’s just an attachment ton the end of the hose the black and silver thing

@ryft9842 Жыл бұрын

I didn’t know if I could just take it off or not

@thingsido2924 Жыл бұрын

The black part, is just a rubber sleeve, mine didn't come with that. The silver part at the end screws onto the hose bib. It doesn't come off unless you cut it off.

@keithdowers5136 Жыл бұрын

What lug nuts did you use ? The rims take larger lug nuts. Did you use the TJ lug nuts ?

@thingsido2924 Жыл бұрын

Yup, I used the factory TJ lugs with no issues.

@H.O.Joe2667 Жыл бұрын

First I have to say very good video! Thank you! Because people like you is why KZbin is a great source for DIYers! I am it the process of painting my aluminum Jon boat. I went to Lowes and seen this paint and thought I would give it a try. I got the nickel color and it was too light. So I was thinking do I need to buy all the silver/gray tones to find the right one? Nope! That is what youtube is for so I looked on here and found a review video with the 5 or 6 different shades of silver/gray. I loved the Flat Soft Iron color the best so I went to Walmart to see if they had it and they didn't. They had a few of the other shades and also another one called Gun Metal Gray. But I could not compare it to the Flat Soft Iron. So I went on youtube again and said to myself what are the chances that there will be a video with someone comparing the Gun Metal to the Flat Soft Iron and here you are!!!! The Gun Metal looks very good on your wheels but I am going with the Flat Soft Iron for my Jon boat! Thanks again!!

@thingsido2924 Жыл бұрын

Thanks for feedback, I'm glad you found the video helpful. I tend to like the color of the flat soft iron better than the gun metal grey because it has a richer tone and more metallic in it, I think you'll be happy with it.

@rashmedo Жыл бұрын

Absolutely amazing. Great stuff

@thingsido2924 Жыл бұрын

Appreciate it, thank you.

@lindawalker9100 Жыл бұрын

I was excited to find Hills Bros Cappuccino Sugar Free. But sad to say it doesn't dissolve completely. Tried various temperature of hot water. Unfortunately, the end result was the same.

@thingsido2924 Жыл бұрын

I agree, I didn't like the sugar free one. The original is way better and dissolves fine.

@victorugalde2000 Жыл бұрын

Thank you berry helpful

@danpatterson1043 Жыл бұрын

I recently went with a nearly identical setup on my 97 TJ. The JL wheels look great and I like the tire:wheel ratio for lack of a better term. Got a question though, what pressure do you run at for daily driving?

@thingsido2924 Жыл бұрын

I sold the Jeep nearly 3yrs ago but I think I ran 28-32 psi

@salleyne7106 Жыл бұрын

where did you get the tensioner?

@thingsido2924 Жыл бұрын

It's the factory tensioner, I just happend to paint it red while I had it off. Not sure why, I guess I just thought it was a good idea at the time. 😏

@OriginalFallofMind Жыл бұрын

Yo! Sound clips???

@thingsido2924 Жыл бұрын

I originally tried but unfortunately my camera mic doesn't do the sound justice. It's not loud or raspy, it's more of a deeper European car tone. No pops or bangs. I think of it as a mature sound.

@coolacadien Жыл бұрын

Everyone can only polish the surface of the wheel but can’t do the whole inside of the hole or spokes. The detailing industry should make some small polishing wheels

@ILO1969 Жыл бұрын

Don't you have to clean threads in the PVC pipe before screwing in riser?

@thingsido2924 Жыл бұрын

I never have.

@IzquierdoDan Жыл бұрын

Did you put any gloss or clear coat over that gunmetal?

@thingsido2924 Жыл бұрын

Not at the time of the video, but I applied a matte clear coat at a later date.

@IzquierdoDan Жыл бұрын

Thanks for your response, could be duplicolor matte clear?

@thingsido2924 Жыл бұрын

I didn't use Duplicolor, but I don't see why it wouldn't work if that is what you're planning to do.

@IzquierdoDan Жыл бұрын

@@thingsido2924 thanks. Which one did you use? And does it works fine?

@thingsido2924 Жыл бұрын

I used Rustoleum 2X Ultra Cover Matte Clear. After a while I felt the Rustoleum Gun Metal Gray lacked the metallic finish that I wanted. I ended up painting the wheels again with a light coat of Duplicolor Stainless Steel to brighten them up and provide more metallic. www.oreillyauto.com/detail/c/dupli-color/dupli-color-11-ounce-sliver-gray-spray-paint/dpl0/ss100

@irubio016 Жыл бұрын

Thank you! Very useful review!!

@jimtowngirl18 Жыл бұрын

Thank you for the video✨🩷☕. I recently got white chocolate caramel flavor and never tried this brand before. Hope I like it with red velvet cake.

@thingsido2924 Жыл бұрын

White chocolate caramel is good a choice too 👍, thanks for watching.

@dannyb78 Жыл бұрын

Man this is awesome, I was just about to take my jk wheels back to the guy I bought them from because they were of course different bolt pattern. Already ordered my spacer. Thanks for the info bud.

@thingsido2924 Жыл бұрын

Cool man, hope it all works out well for you. Thanks for watching!

Ең жақсы KZbin

Пікірлер