Cool video and informative too . Now do the math on the check valve going from sealed to venting to sealed at 8000 RPM . I doubt it is effective at venting a piston down stroke pressure increase and then sealing returning air during the piston's upstroke . The check valve would be switching positions 16000 times a minute at 8000 RPM . This is a tough situation that I think of often .
@michaeljennings40996 күн бұрын
How much for a rolling frame
@northminibikes6 күн бұрын
@@michaeljennings4099 depends on what you're looking for. Find the FB page, send a message
@privatedata66511 күн бұрын
NPT fittings are very confusing to me . Yes that is a 1/8th fitting but it does not physically measure 1/8th of an inch . My 2 brain cells argue when selecting NPT fittings . Great content , Man and cool bikes too
@rockman49er11 күн бұрын
Today is my second day trying to tune my vm22 carborator it stalls at the high end i hope i figure this out because its starting to piss me off
@dennisberry282118 күн бұрын
What’s up brotha I think it’s cool you watch Mardy I like his lil ride outs and I’m from Michigan as well I’m in middle of street legalizing my mini bike too so the cops don’t mess with me lol
@oldm11420 күн бұрын
Do you have a website, how would I buy one?
@northminibikes20 күн бұрын
@@oldm114 Google North Minibikes, or search Facebook
@Jaws56dog20 күн бұрын
It wont work cause you put the studz racing sticker on it
@northminibikes20 күн бұрын
@@Jaws56dog I hear that!
@Jaws56dog20 күн бұрын
@@northminibikes i live right by their store in taylor michigan, they will sell you the wrong shit all the time, like the cheap gps mikuni knock offs but they will tell u its a real mikuni in store🤦
@northminibikes19 күн бұрын
@@Jaws56dog agreed, I don't buy from them unless I absolutely have to.
@youngceez56225 күн бұрын
Best video, by far 👏 good information. You just got another subscription 👍
@northminibikes24 күн бұрын
Awesome, thank you!
@LouieFLEXx26 күн бұрын
🔥🔥🔥🔥
@LouieFLEXx26 күн бұрын
Thanks for all the information. I’m working on building my doodle bug 🐞
@LouieFLEXx26 күн бұрын
Dude!!!!! Love your videos and builds 🙌🙌🙌🙌
@mikeycoolx26 күн бұрын
How much do you charge for custom mini bikes, i been wanting one thats built like a chopper, thank you for the video aswell
@northminibikes26 күн бұрын
Usually about $400 a frame depending on what you're looking for
@racerothery271627 күн бұрын
Hey y’all, whoever needs to know this stuff should listen up be Evitable you’re going to ask the questions that he’s answering even if it’s not right this second. I recommend everyone of you start with Redbeard’s garage channel and go to the playlist and find Road to horsepower and watch all of them and pay the FU*K ATTENTION
@philpalmer487728 күн бұрын
High Fives America! 😎
@minibikerebuilds28 күн бұрын
What camera you using?
@northminibikes28 күн бұрын
@@minibikerebuilds X4
@theincrediblecraigo846629 күн бұрын
What's the song names and do you ever get bothered by cops
@northminibikes28 күн бұрын
@@theincrediblecraigo8466 I made the songs, search North Minibikes on SoundCloud. No cops don't bother me....cuz I'm legal! I have a video on that too
@menolara17Ай бұрын
Where did you get the wheels and tires for the blue bike looks great
@minibikelarryАй бұрын
This video was a whole vibe! From filmography to the track. It really “felt” good watching this neph. 🤜💯🤛👽🤘
@eljermoАй бұрын
I like it
@SteveTheCanadianАй бұрын
What time and tire combo do you got going on?
@RedGhost1990Ай бұрын
This Looks so good, i want to build one for Cruising around. Edit: It Sounds good to not to loud perfect for cruising i think
@SteveTheCanadianАй бұрын
These edits and angles are the dopest dope iv seen in a while
@owenwalker1662Ай бұрын
if you want to vent a stock valve cover, as long as you vent out properly, you can use a flathead and hammer to knock the stock check valve thing out from the corners which will give you more space for the barbs.
@GeneReasonerАй бұрын
Gas tank???
@SoCaliHighlanderАй бұрын
Gold torque converter and accents cool and different
@SteveTheCanadianАй бұрын
The bike is looking like a Beauty! What time and tire combo do you have on the back? If you don't mind me asking
@northminibikesАй бұрын
@@SteveTheCanadian That's a 12x7 steel trailer wheel. With a 205/30/12 golf cart tire.
@claytonscott9942Ай бұрын
What kind of tubing do you use?
@northminibikesАй бұрын
@@claytonscott9942 1/4"
@claytonscott9942Ай бұрын
@@northminibikes no but like what kind like the material/brand
@northminibikesАй бұрын
@@claytonscott9942 i used to use PVC. Now I spend $25 for 10' or the real deal 3 ply fuel tubing. Never have any issues
@SuppleKingdomАй бұрын
If you can go faster than a dentist on a 15k bicycle it should be a pain in the ass to register and you probably should need to carry liability insurance.
@northminibikesАй бұрын
@@SuppleKingdom it's not a pita at all
@aaronthompson8719Ай бұрын
Link for sticker?
@northminibikesАй бұрын
@@aaronthompson8719 Amazon
@RedGhost1990Ай бұрын
Is this a Predator Engine?
@TheR1dd1er23Ай бұрын
Is the only way I can do it as if I have proof of purchase on the engine?
@TheR1dd1er23Ай бұрын
My cousin bought me a new motor for my bike but he does not have the receipt for it, can he make a bill of sale signing it to me and will it count?
@northminibikesАй бұрын
@@TheR1dd1er23 No, you can make your own number as long as it's on the bill of sale. Get a punch set and rivet it to the bike I took a picture of it so that they could see it matched the bill of sale
@RedGhost1990Ай бұрын
WHat engine is this?
@mainboom4225Ай бұрын
How did u come up with the vin number? Just made one up or how do you get a number that isn't used yet
@northminibikesАй бұрын
@@mainboom4225 I use basically a two-digit year to digit model number, and 4 other random numbers and that was about it
@tyronesharp8115Ай бұрын
Hey buddy i need some help and you seem to have this down. I bougt a 150cc motorcycle from a friend that looks somewhat like a moped. If i slap 80cc stickers on the motor and make my own vin i can register it as a moped? Do you have to get inspection?? I can simply make my own vin plate and write a bill of sale from joe shmoe? I just need it to be registered to me but the guy i bought it from has no paper work as he bought it from our other friend with no paper work... i cannot find a vin anywhere on the bike as it came from china a few years back....
@northminibikesАй бұрын
Well, depends on whether that bike has a serial number. I registered mine as an "assembled" moped. A manufactured bike will likely need a title and plate.
@tyronesharp8115Ай бұрын
@northminibikes I mean I've done a bunch of work to it to get back kn the road couldn't I just say I bought the frame from this guy down the road here's the serial number on it?
@northminibikesАй бұрын
@@tyronesharp8115 sure you'd get registered no problem but if you get pulled over and the cop says this isn't a moped.... Trouble
@tyronesharp8115Ай бұрын
@northminibikes I mean I'm riding eith no plate at all currently I almost feel like they would be more lenient with a moped tag? I'm just trying to get it not completely illegal
@theonlyfattnblack2723Ай бұрын
Great video brotha the KZbin need an update lol Much appreciated 👍
@fasterthunder8308Ай бұрын
My Coleman bt200x has a VIN number and my ct200u has a mode number will those work? I have no paperwork for em I bought em used
@fasterthunder8308Ай бұрын
Also how can I get a title or whatever. I've heard people use "dirt legal"
@northminibikesАй бұрын
@@fasterthunder8308 you only need one number. Get you girlfriend to write you up a bs bill of sale with the frame vin. Tell secretary of state it's an assembled bike. Have her put 99cc on the bill of sale. All you need.
@fasterthunder8308Ай бұрын
@@northminibikeshow do I tell sec of state that? What's the website
@northminibikesАй бұрын
@@fasterthunder8308 so make some paperwork
@jessicacrossland1999Ай бұрын
Do you think the cops would give me a hard time over a manual transmission? The sos registered my “dirt bike” as a moped and it’s got all the bells and whistles but it’s 125cc i put the 99cc sticker on they said they wouldn’t give me a a motorcycle title at the sos they said it was a moped, so i ran with it
@tsukiyomi_420Ай бұрын
That gas tank is so cool
@f250ford1975Ай бұрын
How about one hose from valve cover to governor hole, and another hose from valve cover to catch can? My catch can has a filter on top btw..
@mikeycoolxАй бұрын
Who did you call secretary of state, police station, the dmv?
@northminibikesАй бұрын
@@mikeycoolx you make an appt at sos. You don't need police.
@mikeycoolxАй бұрын
@@northminibikesthank you
@Rcbiggie1Ай бұрын
I'm having issues finding front brake setup for my bike. It the rascal lite from go power. Any help would be great appreciated.
@northminibikesАй бұрын
@@Rcbiggie1 I always just find a caliper kit from Amazon and then I get a steel collar the one with two bolts in it expose some raw metal clamp it around the fork and then weld it in place
@Rcbiggie1Ай бұрын
@@northminibikes I have that stuff. I'm having a hard time finding brake disk for the front wheel. I've looked up wheels only finding rear wheels.
@ogpeek_a_boo98962 ай бұрын
Do I need the Billis sale? I still have the box in the garage. Axis m200 from Lowe’s. It has a Vin number on it. Mira likes everything else 90 cc sticker. In from Michigan
@northminibikes2 ай бұрын
you just need some part of the bike, frame, engine, whatever to have some sort of traceable number on it. If you don't have any numbers then you can make your own like i did as long as it's on the frame, then you can make a bill of sale to yourself showing a cost of whatever and the number.
@noahkane520421 күн бұрын
@@northminibikesso I can make the serial number anything a want ? And just bolt it to the bike take a picture and I’m good?
@noahkane520421 күн бұрын
Meant to say I
@northminibikes20 күн бұрын
@@noahkane5204 yup, the biggest thing is to tell the Secretary of State that is an assembled moped
@ogpeek_a_boo98962 ай бұрын
Do I need the Billis sale? I still have the box in the garage. Axis m200 from Lowe’s. It has a Vin number on it. Mira likes everything else 90 cc sticker.
@northminibikes2 ай бұрын
@@ogpeek_a_boo9896 you just need a number somewhere to identify the bike. That's it
@BlackRose-xp9qc2 ай бұрын
Wheres that wheel from
@BlackRose-xp9qc2 ай бұрын
Do you make stretch tabs?
@mandrew201112 ай бұрын
“Wind in his hair” 🤣🤣
@Rcbiggie12 ай бұрын
Where did you get the front brake kit from?
@northminibikes2 ай бұрын
Standard brake from Amazon welded to a collar
@Rcbiggie12 ай бұрын
What wheel and tires are those?
@DeezGarage2 ай бұрын
I pop that baffle out, and run to my can. No check valve, for the negative pressure on the upstroke.
@northminibikes2 ай бұрын
@@DeezGarage what happens with no check valve?
@buddahmayne92732 ай бұрын
I have no check valve also. Wondering if I should run one