Very helpful! I was trying to decide whether to spring for rear inners in addition to confirming these are a good product.
@ESBJeep2 сағат бұрын
@@pauljanda5262 thanks for watching, and these fenders are a great product and easy to install
@AtticAZ6 күн бұрын
I sam having an issue with mine. I ordered what the Mopar website said a would fit my Jeep Wrangler with 7inch screen. The Yellow plug is missing. I got black, blue, red and the gray usb. Then there is another black one that is next to the gray usb one but it’s reversed. 🤷🏻♂️
@AtticAZ6 күн бұрын
GOOD NEWS. Radio, backup camera, CarPlay are now working. It even set the them!! Didn’t even take an hour. Only thing I am waiting on is Nav. It’s says I’m in Japan. lol.
@ESBJeep6 күн бұрын
@@AtticAZ That's awesome! Yeah the Nav will take a few hours. Glad it worked out, enjoy 😀
@postwick9 күн бұрын
Why doesn't the grid extend the full width of that opening, or they could at least give you some sort of trim to put at the ends so those screws aren't exposed.
@ESBJeep8 күн бұрын
@@postwick funny you should say that, I have new product from Bullet point and I will be installing it soon and I'll post the vid! Thank you for watching & your comment 🙂
@postwick8 күн бұрын
@@ESBJeep the one I saw on their web site looks different than what you have in this video. I ordered it, goes the full length.
@ESBJeep8 күн бұрын
@@postwick yup the new one is the one I have along with a bunch of accessories for it and some cool other stuff. Bullerpoint makes some great products!
@kylecowley520115 күн бұрын
When you changed out the radio, were you able to keep the same Sirius Radio ID or did you have to call and cancel the old radio and update your new one?
@ESBJeep15 күн бұрын
@@kylecowley5201 you would need to call Sirius and put in the new radio. I have a lifetime subscription so I had to pay to switch mine to the new radio. It has worked fine since I did this swamp. The radio is working perfectly and I am still glad I did it. Thank you for watching and your comment
@kylecowley520115 күн бұрын
@@ESBJeep , sure wish Sirius Radio still offered that lifetime subscription. Enjoyed the video.
@neerajthakur1127 күн бұрын
I ordered 3 inch 80W auxbeam for my motorcycle. After testing them on bench power supply. These lamp rate 30W each. There is no documentation of 80W on the box as well. Did you test the power consumption?
@ESBJeep27 күн бұрын
@@neerajthakur11 I've tested my lights. They seem Brite for ditch lights but I would not use them to really light the path forward. Thanks for watching and your comment.
@ddistrbd1Ай бұрын
Thanks for the quick review, I'm glad I'm not the only one thinking " all I need is one mic and one receiver" thank god DJI came up with it in a less expensive package. charging this set must be easy also ( I mean without the charging case) but I'll figure it out when my order is delivered.
@ESBJeepАй бұрын
@@ddistrbd1 it works so well!
@MelendezhistoriaАй бұрын
Cuando se frena se siente en el deadpedal cierto movimiento.
@cashgames2440Ай бұрын
if you decided to add a second mic, will it work with both of them ?
@ESBJeepАй бұрын
@@cashgames2440 yup you can add another one at any point
@middlehotАй бұрын
Somebody told me if i have the 7 inch screen and swap to 8.4 i need to install also antenna for nav and remote start app wont work ? True? Thanks
@ESBJeepАй бұрын
@@middlehot what, that's crazy lol. If you have a 7 inch screen that means you already have Sirius XM. That means your antenna for Sirius/NAV is already there. Also it has nothing to do with your remote start app. I am not sure where you heard those weird stories from but do not take any advice at all from them 😁. Thanks for watching.
@middlehotАй бұрын
@@ESBJeepthanks a lot
@W1LDCH1LD13 ай бұрын
What size bolt did you use for your fairlead? I picked up a knockoff and it didn't come with any bolts. Great video!
@ESBJeep3 ай бұрын
Thanks for watching and your comment. Unfortunately I am not sure what size it is.
@claudiagamino64993 ай бұрын
What size are the origi sl screws that hold the jk OEM tranny skid plate
@Christ-in-Damary-n-Dave3 ай бұрын
8:32 !!! You made a subscriber out of me!!!
@ESBJeep3 ай бұрын
Thank you for watching and your sub!
@vicc67443 ай бұрын
WEELLL nobody has seen this deal in action?
@ESBJeep3 ай бұрын
True I need to put a video up!
@528lineboy3 ай бұрын
A cordless impact gun & ratchet makes this job so much faster & easier. It was killing me watching you work with hand tools
@ESBJeep3 ай бұрын
It killed me to lol. It was too tight for my hands and an impact to get in some of those places. Thanks for the comment & watching.
@vicc67443 ай бұрын
Is it possible to remove the metal ring on the front of the rope?
@ESBJeep3 ай бұрын
Hi there, if you mean the metal hook yes you can. I am running a flat link style shackle mount. Thanks for watching.
@vicc67443 ай бұрын
@@ESBJeep I was thinking of the metal thing in the eyelet of the rope- but you got flat link to fir with it? NICE- I will look for one also- Thanks
@digitusimpudicus23253 ай бұрын
What a waste of time. How can you do a video about antennas and not test out the reception?
@ESBJeep3 ай бұрын
Sorry brother but if you listen in the video I said I don't use my radio I have a lifetime Sirius XM radio. It was just to get rid of the huge antenna. If you want I can do a quick radio later today and let you know how much you lose. Thanks for watching.
@grubburg52013 ай бұрын
Why did you say made in China? RR told me made in georgia
@ESBJeep3 ай бұрын
That's awesome if they are. I worked in the Jeep off-road industry for years and so much of the products were made in Chinese factories and "assembled" in the USA. If RR is 100% made in the USA then I stand corrected happily! Great bumper though and it has no rust on it and I live up here in Canada where everything rusts! Dam I miss Texas...
@grubburg52013 ай бұрын
Just got the box. RR lied to me. Says Taiwan
@ESBJeep3 ай бұрын
@@grubburg5201 it sucks but it seems almost everything is made off shore now and not in North America. I always try to purchase American made when I can.
@dootch13 ай бұрын
Is it just plug and play? And is there a security code or anything when installing?
@ESBJeep3 ай бұрын
Plug & play and you will get the security code from the dealership parts guys of the radio you get.
@dootch13 ай бұрын
@@ESBJeep thank you
@DanasDiary.4 ай бұрын
Do you know if you can use this mic if you are recording on a phone?
@ESBJeep4 ай бұрын
Yes you can. Thanks for the comment and watching.
@DanasDiary.4 ай бұрын
@@ESBJeep Perfect, thank you ☺️ thank you for answering my question, really enjoyed the video!
@Colorado4x44 ай бұрын
Thanks for the video homie! Maybe you can help me out? I’m going to mount the head unit for my Kenwood ham radio with one of the 67 Designs or Bulletpoint dash mount systems. I’m placing the head unit so the top of it is flush with the dash. I want to see if I can pop off the bezel, cut out a tiny half circle so the radio cord can fit through and then I want to run the cord down through the dash to the control unit. It looks like there is enough space (with the bezel popped off) to where I can run a cord to the left or top of the screen? Thanks! - Geoff
@ESBJeep4 ай бұрын
There is room on either side. Just depends where you are planning on running your ham radio. I love Bullet point's stuff for my stuff. I actually have an install video coming up with products from them I have to install. Thanks for watching and commenting.
@Colorado4x44 ай бұрын
@@ESBJeep that’s awesome man. Thanks for the reply! I’m going to try installing it there. I think it will be super clean. I will take a look at Bulletpoints stuff too
@bobnoblesjr.4655 ай бұрын
I just received mine and will use your video for guidance. Do you have the off-road pages as well? Thanks for the video!
@ESBJeep5 ай бұрын
Awesome good luck with the installation. Unfortunately the only thing it will not give you out of the box is off road pages. It be added by the dealership and I think an after market tazer I believe
@pjfan1735 ай бұрын
Liked and subscribed
@ESBJeep5 ай бұрын
Thank you!
@pjfan1735 ай бұрын
What percentage of tint did you go with?
@ESBJeep5 ай бұрын
I am sorry I can't remember the percentage but I asked for it to match the back windows. Thanks for watching
@guacman885 ай бұрын
Hey man I have a question if you have the time . I have these but mine only came with one harness. Can I still wire them up or it needs the harness to make the drl and turn signal work. The actual fogs work fine but I don't know exactly how I can make the turn and drl lights work without the harness. I'm not a wiring master so if this question sounds stupid I'm sorry. Lololol
@ESBJeep5 ай бұрын
You would need the harness to get the DRL working and signals. I never used the hook up as I just wanted the fogs only. Thanks for the comment & watching.
@guacman885 ай бұрын
@@ESBJeep thank you for replying dude. 👍🏿👍🏿. No problem. And I guess I'll have to get a harness from. Them or something. Lol thanks Man
@tonyelflaco72976 ай бұрын
good video link to buy one
@ESBJeep6 ай бұрын
Just check in with your Jeep parts guy and they can order the radio for you. Thanks for watching
@TheIfeomaa6 ай бұрын
Lovely review Thinking of getting this after watching this I would
@ESBJeep6 ай бұрын
Thank you for the nice comment! I honestly love this mic, and I use it all the time. If the new mic from DJI connects to my new GoPro 12 I'll grab that one too!
@PhantomPhixer16 ай бұрын
Well done!
@ESBJeep6 ай бұрын
Thank you for watching!
@needavacation12386 ай бұрын
I’ve been researching lights and wondered if you happen to have some pictures or a short video of just the Auxbeam 3” a pillar lights on at night to show the light pattern and how far they light up down the trail? The only videos that show the lights on of yours I have found is the ones with them pointed at the garage door and also the video of the bumper light install. Would you still buy these lights again? TY!!!
@ESBJeep6 ай бұрын
These lights are fantastic for the price. Sorry I should have put up a vid of the lights at night while driving. I can tell you they still work great, no rust and zero issues. The amber does cut the fog a little but I may just switch it back to just white. Thank you for watching & your comment.
@needavacation12386 ай бұрын
@@ESBJeep TY for the reply!!! I have been running a 10” R1 light bar with lamin X yellow film (that I added) on the front bumper of our RZR and it works great to cut through the little bit of fog we occasionally encounter, but also does really good to cut through the dust from the machines ahead of you. I wonder if they were mounted lower if that would help them cut through the fog better. Have you hit any trails and if so, how does the combo beam pattern light the trails up? TY again!!! 🍻
@burneyalverez55346 ай бұрын
Can you give a 6 month update on the Carchy? Would you spend the money and purchase it?
@patrickmiller14726 ай бұрын
struggling with the $1000.00 not sure i will get the value to make pencil for me thanks for the video!!!
@ESBJeep6 ай бұрын
Yeah it is a big investment, I had the money saved up and I hated the smaller screen when I was reversing. Thanks for watching.
@Apple4life276 ай бұрын
Congrats. I do have a question and if you have time to answer thanks. The Amazon factor 55 knockoff. Is it any good? How has it been holding up? I hate to save money and not get the factor 55, but you sounded like me, when you said family and new truck and need to save on some parts.
@ESBJeep6 ай бұрын
So far so good. The color has changed, it is kind of bronze now not red. I will do a review vid on it this spring/summer. Thanks for watching & the sub!
@Apple4life276 ай бұрын
@@ESBJeep Thanks
@beysan_tasci7 ай бұрын
Thanks for video from İstanbul.
@ESBJeep7 ай бұрын
Thanks for watching
@00GRz2m47 ай бұрын
Congratulations
@ESBJeep7 ай бұрын
Thanks 👍
@00GRz2m47 ай бұрын
Great video bro
@ESBJeep7 ай бұрын
Thanks for watching 👍
@raywalters61417 ай бұрын
Ordered December 29th - still on backorder as of today, estimated ship last week of February.... 😑😑
@ESBJeep7 ай бұрын
They are worth the wait! I've had zero problems with them and honestly Jeep should have made the taillights on the Gladiator like these anyway. Thanks for watching!
@Dino8607 ай бұрын
Great video, Thank you. I can’t get my lose with a deep 13mm socket and an impact driver. It’s actually stripping the nut. Any ideas?
@ESBJeep7 ай бұрын
I would never use any power tools on smaller things in Jeeps, it always ends bad lol. Try getting an adjustable wrench in there and really squeeze on the nut. Thanks for watching.
@foxconNI7 ай бұрын
Can you link 2 mics to the receiver
@ESBJeep7 ай бұрын
Yes you can. Thanks for watching.
@MeshTheSnake8 ай бұрын
Such a great review, thank you so much for making this. Extremely authentic and real!
@ESBJeep8 ай бұрын
Thank you for watching & your kind words. I really just shot all my videos from the hip. I have a mountain bike channel as well that I kind of do the same thing. Just be honest and tell bad jokes lol
@caburchfield12128 ай бұрын
What year jeep was in video? I have a 2011 Jeep Sport (2-door) which only has one retention clip on each front side. I believe later years had two floor hooks, so concerned about compatibility.
@ESBJeep8 ай бұрын
My JK is a 2011. Maybe because mine is a 4 door it is different. I always put Husky Liners in my vehicles! Thanks for watching.
@BARBELLSTOBUDDHAS8 ай бұрын
You mean like spending the $1000 to visit your bud in BC bitch?!
@BARBELLSTOBUDDHAS8 ай бұрын
I bet you like it bigger. 😂
@BARBELLSTOBUDDHAS8 ай бұрын
Shut up! 😜
@michaelwashington7778 ай бұрын
Wat does it matter, Corona or influenza? Bith can kill ya, but dat 'rona tis much weaker!😅 😅 0:29
@berkebiletim8 ай бұрын
My dealer just told me this was not possible on my 2023 JL, but your dash and screen look identical to mine. Any idea if this is applicable to my Jeep?
@ESBJeep8 ай бұрын
I would say as long as you get a radio that is made for your model you are golden. Just find a model like yours but with the larger radio and take down the VIN# of that jeep and give it to parts to get a radio in. I have had a ton of people after watching my video do exactly what I did and had no issues. Thanks for watching and your comment.
@berkebiletim8 ай бұрын
@@ESBJeep I immediately went and took apart my dash the same way you did and everything looks identical. Infotainments website shows an 8.4 inch with 2023 as one of the compatible year models (for JLs specifically). Thanks for the video, I think the guy I spoke to was confused/uninformed...although the 8.4 is $2200 right now 😬
@ESBJeep8 ай бұрын
Awesome, also never listen to the guys at dealerships lol 😊
@rickster29298 ай бұрын
Dd you disconnect battery?
@ESBJeep8 ай бұрын
Yes I did, thanks for watching and your comment.
@josephbeavers10348 ай бұрын
How did these end up working out? Would you buy again?
@ESBJeep8 ай бұрын
These lights are great. No rust on the actual case from weather and they have worked with no issues. The light is bright and clean. They are not very big but the light they throw is very good for their size and price. I'd buy them again. Thanks for watching and your comment.
@Thelifeofcesar8 ай бұрын
Awesome video sir! New subscriber. I've been working on getting gear to start my own channel, and this definitely cemented my decision for which microphone to buy!
@ESBJeep8 ай бұрын
Thanks for the sub & comment!
@jr.4349 ай бұрын
Awesome video will the back up camera still be as clear?
@ESBJeep9 ай бұрын
Thanks for watching, the back up camera is even better and it's the whole screen!
@SugarFiveZero9 ай бұрын
Great unboxing and good review. What canon is that?
@ESBJeep9 ай бұрын
Thanks for watching! Oh it's an old one, SL2. Works great though.
@cdnjeepoverland10 ай бұрын
Crazy about the (poor) powder quality on those KC brackets. They’re going to rust, and fast. Wonder if it’s worth bedlining them right away?! No point buying brand name brackets, thats for sure. I will say that KC light warranty is excellent, though. I’ve used it a few times.
@ESBJeep10 ай бұрын
My Jeep dealership in town is pretty awesome. I had to do warranty work on the hinges and they painted my KC brackets for free! So now their paint matched lol 😆