Clear and concise, but I'm not sure why all the wiping with acetone is necessary, producing much noxious fumes. Surely water, or perhaps some light detergent, will do just fine?

I built one for coping stones but still struggling to get a good finish I’ve tried a bit wetter but still struggle to get a south finish . How long do you vibe for ?

Thanks for showing the whole process (with mistakes). Very helpful. 🌻

The best straight-to-the-point, but with right amount of detail video on this subject I've seen.

Brother taking psychiatric medication is good ?

If I have a large table, let’s say using 4 tires, do I need a motor for each tire?

Spot on mate. Very useful advise👍

Why are you showing your face instead of what you built?

Your so right when you said often you know what you need but not what they call it 🤣 ive had so many times when i know for sure that someone has made and sells what i need but the name is very much not obvious 🤣

Hello Matt, did you receive a reply from 3M on the seal issue, hopefully okay now as just about to order same, thanks

Hi, emergency question. How long can these be? What if I want to do a 4160 long worktop?

Hi Matt, do you have the drawer hole positioning?

Bit of a job on a garage door

Can you link to the paint used and did it hold up for 3 years?

Thanks, Any chance to resend the link for the vibrating motor please (UK).cheers

Great tutorial like other been looking at a lot of US based ones so nice to see a decent uk video. How have they held up over the years ?

WOW I was a spray painter for 30 years and know exactly how much mess the excess polishing is sprayed all over the place! Your misses must of killed you for the mess on everything else!!

Thank you from south korea

Those smaller thinner trim pieces don't seem possible with that size of aggregate?

Hi Matt, how do you stop the epoxy running down the drainer whilst it sets. If it is self levelling I'd have thought it would run off it ?

Meds dont work from my experience

you gotta quit drugs and any stimulamts, caffeine etc....

Hey Matt. Do you still do customs? I’ve looked for your email and for your eBay. But no luck! :( I do love your channel. Thanks.

I was on sertraline it ruined my life 😪 made me so anxious I was suicidal now I'm off all meds and I'm coping with my anxiety with meditation

Great video, some great tips thanks!

Thanks for the video 🙌 you said it will work with any boiler, my old boiler has got mechanical timer/clock , only 3 cores comes FROM boiler PCB into that timer clock... 3 cores, thats all that turns boiler on and off ...

So you took 2 h to I stall the mask that’s ridiculous.

I know this vid is old but this would happen to me a lot. Now I am fine I am taking medication.

How thick is this Countertop? I'm torn on doing 1.5 or 2.0 inch. I really like the look of this one though. Thank you.

Thanks....youve really helped me.....regards

Wonderful in texture and color.

I need to place the hinge lower because where it is my sink is blocking the hinge from snapping. Could I do this in another spot on my existing ikea door?

Just in the middle of doing the same Why didnt you do the covers on them ...epic video

Just wondering if you tried rubio monocoat? have been told this is also good but I tried a sample and found it hard to get consistent finish. Have two rooms with birch ply walls and want to stop the wood from yellowing. Will this osmo product stop that?

Does the sealer work on white concrete worktops. I’ve tried 4 sealer already and none of the prevent staining.

On your final ring circuit hope you are using socket outlets with duel earth terminals and connecting your incoming cpc to one of the earth terminals and the outgoing cpc connected to the other earth terminal, what this does if for some reason one of your cpc cables comes loose and pops out of its terminal it means connecting the cpcs as I have told it means you will still have all the socket outlets covered by a cpc and if an earth fault occurs it will still trip the rcbo or mcb back at the board, because obviously you had put both cpcs in the same earth terminal and it came loose and they both popped out it would mean the socket outlet that this happens to has now no earth and a fault could occur and if an appliance which was plugged into the said socket say a washing machine had an dead short down to earth then the fault path would be your body if you touched the casing of that washing machine so it's a good tip to use those modern sockets with duel earth terminals but it only works if you put the cpcs in separate terminals

Thanks for the video and the test, but for your health and dignity put gloves and a TShirt when you manipulate chemical products.

Philmac or Plassom - million dollar question

Question: I have black epoxy floors all over my loft and recently, when I decided to get rid of a carpet, I realized that it had left a discoloration where it used to be, under my super heavy dining table (that I literally can't move on my own). Would a sanding and polishing job, as featured in this video, work to fix it? I'm hoping to not have to redo the whole loft if possible 😅

'Link in a description..' DONT THINK SO

Hate these brackets, they have zero play! Had similar radiator on and off so many times I get it close but it seems like the curve on the bracket isn’t small enough so the radiator wobbles a little. My wall is not square so I assume that’s what making it off, and my brackets are singular (one hook) not double whammy like in video. Ah we’ll try again tmrw with my packers 😢

How does it feel to be so attractive?

Any cheap alternative to 3M. Doing some fun project but not wanting to spend that much for a Pro product

👏👏👏

Listen I started having anxiety previous year, 2023. That time i didn't knew anything about anxiety and it's things. Then after months i researched each things and possibilities, then I reached the conclusion my self that I've anxiety, then I started working on myself, my anxiety by myself not any medication. My main problem was having fear of going insane and doing something irrational, I also think this sometimes that am I the only one who is living with anxiety without medications, after 4-5 months I got back to my normal life, I still feel anxious some days suddenly, but as now I know the aspects of it now I don't get horrified or even I get afraid I can calm myself down! Thank you friends 🫂 Please reply if possible!

so the meds buy you time till you sort your issues out but what if your issue that causes the anxiety doesnt have an answer

Keep the camera on the work not your face 😈😈

I am sorry mate, what you are doing is giving people bad advice. Your work hasn’t been signed off, the only thing that has been signed off is of it might be your consumer unit installation, which means what ever happens to your apartment or house and not caused by consumer unit you would end up paying out of your own pocket as the insurance would say, no thank you. I am spark and I wouldn’t refuse to install your consumer unit for you but I would also write down in my cert that wiring was done by not competent person. This is bad advice.

bare chest comes as a bonus to Osmo product review? :D I was really only looking for a product recommendations

90% of house bashing is donkey work. The last 10%; the design, the final connections and the testing and certification, is what you are paying for.