H3000 Factory Mk II Presets Demo
1:52
What Is the Omnipressor
10:37
3 ай бұрын
Пікірлер
@olsza6969
@olsza6969 9 сағат бұрын
how to get to system settings???
@EventideAudio
@EventideAudio 9 сағат бұрын
@@olsza6969 To access these Global Settings, apply power while holding ACTIVE Footswitch and LED button. The top two LEDs on the preset ladder light up when in System Setup. Changes are stored as they are made. Cycle power to exit System Setup. For a list of all adjustable parameters download the Quick Reference Guide (QRG) from the UltraTap downloads page on our website.
@samsschool3639
@samsschool3639 14 сағат бұрын
Sounds like it should be called "telephony"
@sokoleski
@sokoleski Күн бұрын
But way exactly... offset the symmetry in Saturate ?
@davidgerlach1132
@davidgerlach1132 Күн бұрын
How are you hooking or connecting it up for stereo? I must be missing something here. It seems without stereo this pedal is just a chorus, or a flanger with some delays.
@EventideAudio
@EventideAudio 15 сағат бұрын
@@davidgerlach1132 This section of the Part 2 tutorial explains connecting MicroPitch in stereo. Even in mono, MicroPitch is a thickener/sweetener effect that works differently than an LFO-based modulation effect like a chorus or flanger.
@GeoversePR
@GeoversePR Күн бұрын
Best h90 reverb (vintage plate)
@alancalvitti
@alancalvitti 2 күн бұрын
plz 500 series stereo module - no more external psu, ure turning into tascam
@LVXLOTUS
@LVXLOTUS 2 күн бұрын
I bought this pedal with out realizing how crazy it is 😮
@konvulsion2
@konvulsion2 3 күн бұрын
I don't see demo activation at iLok
@EventideAudio
@EventideAudio 2 күн бұрын
To request a demo, please go to etide.io/elevate. From there, you'll just need to enter your email/iLok username, activate the plug-in iLok license manager, and download the installers.
@aquilarossa5191
@aquilarossa5191 3 күн бұрын
I am looking at something like this to use with my Friedman IR-X tube preamp into an Audient iD24 interface. The preamp's TRS balanced out into the combo line/XLR input. The effects unit would go between the IR-X and the interface. Mono will become stereo is the plan. It should work huh? Other options include using something like this in the FX send and return of each mic channel of the interface, so I have a stereo effects bus. I need to sus how that works in DAW though (just running directly in would be far simpler for guitar). Unlike the H90, most effects units for guitar are not happy about being fed a TRS balanced signal. There's some good ones, but I figure it would require messing around with direct boxes etc. There's enough spaghetti junction of cables as it is. :D
@EventideAudio
@EventideAudio 2 күн бұрын
If two cables are used to connect outputs 1 and 2 to the Audient, then yes, you get stereo signal. Regarding the effects bus in the DAW, as long as you dedicate one or two I/O on the interface to connect the H90, it will always live on that I/O; as with any external effects processor, probably best to run the H90 in kill dry.
@miltonalmonte7126
@miltonalmonte7126 6 күн бұрын
I am loving this more
@savagetofu1
@savagetofu1 7 күн бұрын
If… I record a song… can I run it through this “generator” like a regular plug-in would? Or… is this just a synth instrument? Thank you. If there’s a way to do the first idea “chaotically” I’m all ears.
@zhuquestreet
@zhuquestreet 8 күн бұрын
dream❤
@reymartdelacruz2568
@reymartdelacruz2568 8 күн бұрын
this made me want to buy h9max
@gato7keys
@gato7keys 9 күн бұрын
Por qué no lo envían a Chile? 😭
@EventideAudio
@EventideAudio 8 күн бұрын
@@gato7keys Overdrive las tendrá en agosto.
@gato7keys
@gato7keys 8 күн бұрын
@@EventideAudio los amo
@j.r.a.inthacut8148
@j.r.a.inthacut8148 9 күн бұрын
Thanks for this! Just bought the bundle and this is super useful
@fryer6541
@fryer6541 10 күн бұрын
How do you save the preset you made? none of your vids tell how….
@EventideAudio
@EventideAudio 10 күн бұрын
@@fryer6541 kzbin.info/www/bejne/e5XZp5yoe5qohdk&si=HcS33T_ofNB63f2L
@user-tg4ui7hp4j
@user-tg4ui7hp4j 11 күн бұрын
hi how much volts does the mixing link need to be powered fully. is it 9v or 12 v??? thanks for your answer mike
@EventideAudio
@EventideAudio 11 күн бұрын
@@user-tg4ui7hp4j 9V DC @ 200mA / Center Negative (-), 5.5mm/2.1mm jack
@MrMallum
@MrMallum 12 күн бұрын
This was used a lot in the 90's (or H3000) for Drum n Bass breaks. Goldie used it as well as Omni Trio
@DanMarshall-j1o
@DanMarshall-j1o 13 күн бұрын
Is it possible to connect a 2 button external footswitch that will 'Increment and Decrement Preset' without having to push a button to load the preset?
@EventideAudio
@EventideAudio 13 күн бұрын
@@DanMarshall-j1o No, not with a standard auxiliary switch, however this can be achieved with a MIDI controller. For example, Disaster Area Designs makes the MIDI Baby controllers that are compact and can be programmed to control MicroPitch Delay in this manner.
@nantschev
@nantschev 15 күн бұрын
Best plugin video
@timspencer1
@timspencer1 16 күн бұрын
One of my favourite plugins of all time. Would love to have in Pedal form!
@timspencer1
@timspencer1 19 күн бұрын
Great idea! Thanks for sharing!
@CoffeeDrinker71
@CoffeeDrinker71 23 күн бұрын
Is the delay feature running in series after the micropitch effect?
@EventideAudio
@EventideAudio 15 күн бұрын
Delay is inherent to the MicroPitch algorithm, and in its signal flow, delay appears after the pitch shifting module for each voice.
@CoffeeDrinker71
@CoffeeDrinker71 15 күн бұрын
@@EventideAudio Awesome, thank you for taking the time to reply! Cheers!
@sevchyk
@sevchyk 24 күн бұрын
Do professional mixers make such alignments between bass and drums (kick) in acoustic songs? Is that common for that genre of acoustic pop?
@Millerboy
@Millerboy 24 күн бұрын
Nice vocal chain… LOL
@saschacaster
@saschacaster 24 күн бұрын
Guys, I am using the Disaster Area Midi Box 4, but my Micropitch does only recognize Omni Midi Channel settings. When I set the Micro switch to Midi Channel 3, it does not change the presets. Any ideas??? Dip Switch on the Disaster Area Box is set to Tip, Micropitch Exp Mode is set to Midi Box as stated in the manual.
@EventideAudio
@EventideAudio 15 күн бұрын
We recommend using Eventide Device Manager to double check the firmware is updated on the MicroPitch and check the MIDI settings. Have you tried using TS cables to connect to the MP?
@andrefalzon8977
@andrefalzon8977 25 күн бұрын
Van Halen------- if 0 to 127 = 0 to 50 what value between 0 to 127 would equal 9cent in the 0 to 50 range ===ChatGPT Query ===== if you are looking for van halen settings try chat gpt - for 9 cents = 23 same goes for delay settings * assuming the range is 6 seconds----- 798 milliseconds =17 -------398ms =8 ---anyway you get the point - this could have been on the face of the unit ???? haven't tried it but should be ballpark - in the editor obviously
@DeltaWhiskeyBravo13579
@DeltaWhiskeyBravo13579 25 күн бұрын
Great demo. I'm looking at Blackhole now. I like the effect.
@jermaineinoue4919
@jermaineinoue4919 26 күн бұрын
Can all the legacy presets be installed ? If so where can they be found ? If not, what is the reason ?
@porscha901
@porscha901 26 күн бұрын
Isao tomita
@Emcfree2084
@Emcfree2084 27 күн бұрын
This is not a H3000 plugin. Should be called a demo or maybe a H3000 lite as missing almost all the best presets and algorithms. Shame on you Eventide for implying it’s a real representation of the hardware in your marketing.
@pisnickarmoderator
@pisnickarmoderator Ай бұрын
Thank you! Instead of getting headache while reading the manual, you guys showed me what to do. Easy, straightforward, practical video. Now I am all set, acoustic + electric guitar. Rock'nroll!
@scottrrand37
@scottrrand37 Ай бұрын
Omillion??
@TwoThreadsAhead
@TwoThreadsAhead Ай бұрын
All you had to do was level em low, Add that Phil Collins effect and then compress to taste. Why you added the eventide plugs is beyond me.
@charlesbonkley
@charlesbonkley Ай бұрын
It's called advertising, and the world revolves around it now, more than ever before.
@TwoThreadsAhead
@TwoThreadsAhead Ай бұрын
​@@charlesbonkley I think you mean promotion not advertising, in this instance at least.
@GEARHAVEN
@GEARHAVEN Ай бұрын
Do you have a tutorial specifically showing how to use the H9000 with Logic Pro? I'm using it together with a Lynx Aurora and I'm still trying to figure out several things regarding routing and signal flow when processing several tracks simultaneously. Thanks!
@kevinsturges6957
@kevinsturges6957 Ай бұрын
Is the Harmonizer keyboard polyphonic?
@TedBrownMedia
@TedBrownMedia Ай бұрын
Sick. Make more of these vids please❤
@xJeanMichelNoirx
@xJeanMichelNoirx Ай бұрын
Sounds absolutely nothing like the sledgehammer drums.
@josephestes7076
@josephestes7076 Ай бұрын
If you freeze and keep playing, do have reverb on your notes played after the freeze, or is anything post freeze going to be dry? Same question for h90.
@EventideAudio
@EventideAudio Ай бұрын
When using the Blackhole algorithm, the signal that is not frozen will be dry. On the H90, if Blackhole is the second preset it’s possible to process the signal with the effect of the first preset.
@cbob213
@cbob213 Ай бұрын
Yeah it’s just a gated reverb on the snare
@intheblink
@intheblink 25 күн бұрын
Not true. Have you heard the Sledgehammer snare in isolation? It’s some incredible sound design. Way more than just the NONLIN2 preset on an RMX.
@MotiMota15
@MotiMota15 Ай бұрын
How to get phasing 101
@andrewcoop641
@andrewcoop641 Ай бұрын
Well you check both your drum kits are in phase, but a little polarity shift from the effect mixed in adds depth to the sound. Not everything has to be in perfect phase. Listen to Robert fripps guitar work on David Bowies scary monsters album. Those guitars aren’t in phase. Pretty sure David Visconti used the h910 on loads of Bowie albums
@intheblink
@intheblink 25 күн бұрын
Sometimes phasing is actually part of the desired effect.
@MrStone577
@MrStone577 Ай бұрын
Blows my mind how much of a difference this makes. Thank you!
@groovedealerfeaturing-ashl6476
@groovedealerfeaturing-ashl6476 Ай бұрын
...And The World is a better place for it too!
@evenstephen2000
@evenstephen2000 Ай бұрын
This has been a GREAT purchase. The overdrive/distortion is also fantastic and it really took me by surprise how solid it is! ⭐️⭐️⭐️⭐️⭐️
@timothynelsonmusic
@timothynelsonmusic Ай бұрын
Loving my H90. The new sounds are incredible. And the synths are the best… Any plans to create more Multi algorithms? Would be amazing to have more modulation, reverbs, delays, drives etc that share a single algorithm.
@guitarproject3661
@guitarproject3661 Ай бұрын
BIG SKY MX vs H90 ?? ❤🤔
@gweeboyoda
@gweeboyoda Ай бұрын
The one that can do a bunch of stuff with lots of programmable expression options?
@ThomasBrunkard
@ThomasBrunkard Ай бұрын
Actual sorcery
@user-qw8wv6sb1y
@user-qw8wv6sb1y Ай бұрын
Hi, if i use Blackhole in FX loop simulation (Mono preamp pedal - Blackhole - Stereo cabsim (separate device from preamp)) and I need the Blackhole to run from mono to FULL stereo, I have to plug the TS cable (mono) into the input, plug the TS cables into the both outputs, set switches mono and line level. Is that is correct? if this is correct, then the mono/stereo switch applies only to the outputs. Is also means that it doesn’t matter whether I use Y cable or a TS cable, if I use both outputs the result is full stereo, right? I know that this is a stupid question, but initially I was a little confused by the fact that the TS cable is under the set stereo switch, and the guitar is in the guitar position (although probably after the preamp it is essentially already close to a linear signal). I set both switches incorrectly.
@EventideAudio
@EventideAudio Ай бұрын
The Mono/Stereo switch is for the input of Blackhole. The pedal’s output will automatically adjust to mono if only one cable is used (Left output) or configure itself for stereo if both cables are connected. For what you’ve described, keep the switch in mono and connect to BH with one TS. Use two cables on the outputs for stereo. Use line level only if your preamp outputs at that level and your cab sim accepts line level.
@intheblink
@intheblink Ай бұрын
Very cool! Thanks for sharing!